PLC-Trainer 1200

Description:
The training device "PLC-Trainer 1200" is built on a stable aluminum angle. For signal input are integrated 8 toggle switches (on - off - momentary on) as well as two potentiometers for analog value input 0-10 V/DC 10 mA (e.g. simulation setpoint vs. actual temperature values). The signal input is indicated by eight LEDs (5 mm). Learning cards can be put on the board's field "Learning Cards" and used there. The included exercises are based on the principle "From easy to demanding" and are printed on 34 laminated learning cards. You can easily replace them on the board as required. You can store the learning cards in the included transparent box. Furthermore it is possible to put Plug-On Modules - e.g. Motor 2, Traffic Lights 2, etc. (available as accessories) - on the 24-pin interface connector. The integrated 40-pin interface connector allows to connect simulation models via a ribbon cable (available as accessories) - max. 16 in-/outputs. With the slide switch "Infrared Receiver" one input is switched to IR receiving. This allows to realize 10 addiditional switching states with an IR remote control. The slide switch "Bero Simulation" turns on a frequency generator with an adjustable frequency from 60 Hz to 5 KHz. Also a "Horn" can be activated.

Technical Data:
Operating voltage: 24V DC / 850mA
2 Potentiometers for analog value input 0...10V DC / 10mA
1 Potentiometer for Sonar-Bero simulation (frequency generator up to 5 kHz)
1 IR receiver
8 Toggle switches for signal input
8 LED status indication - 5 mm, red
1 Slide switch Sonar-Bero simulation
1 Slide switch horn
1 Terminal 2-pin for SIMATIC-panel (only monocolor)
1 Terminal 3-pin for signal board analog output
1 Interface connector 24-pin
1 Interface connector 40-pin
1 Socket for expansion modules
1 Service socket (0V)
 

Scope of Supply:
1 PLC-Trainer 1200
1 Power supply international 230V AC/24V DC
1 IR remote control (without batteries)
34 Learning cards 110 x 81 mm laminated, in transparent storage box
1 CD with 34 practical exercises and solutions (English/German)
1 Quick guide for operation
Option: SIMATIC S7 1200 CPU 1214C DC/DC/DC, nominal 24V DC