i1Basic Pro 2

i1BASIC PRO 2 INCLUDES:

i1Pro 2 spectrophotometer (measurement device), calibration plate, ambient light measurement head, monitor holder, positioning target, scanning ruler, backup board, USB cable, i1Profiler v1.x software for monitors, PANTONE Color Manager software and soft-sided storage case.



i1Profiler Software Specifications:

Macintosh

•MacOS X 10.5.8, 10.6.x and 10.7.x (with the latest updates installed)
•1GB RAM
•Intel® Processor
•Up to 2GB of available disk space (depending on components installed)
•Powered USB Port
•Monitor resolution of 1024x768 pixels or higher
•Dual display support requires either 2 video cards or a dual head video card that supports dual video LUTs being loaded
•DVD drive or high-speed internet connection required for software install, download and automatic software update

Windows

•Microsoft Windows XP 32 bit (with latest Service Packs and updates installed) Microsoft Windows Vista 32 or 64 bit (with latest Service Packs and updates installed)
•Microsoft Windows 7 32 or 64 bit (with latest Service Packs and updates installed)
•1GB RAM
•Intel Pentium IV or AMD Athlon XP or better CPU
•Up to 2GB of available disk space (depending on components installed)
•Powered USB Port
•Monitor resolution of 1024x768 pixels or higher
•Dual display support requires either 2 video cards or a dual head video card that supports dual video LUTs being loaded
•Network adaptor installed and driver loaded
•DVD drive or high-speed internet connection required for software install, download and automatic software update
 

LANGUAGE VERSIONS

This product is available in the following languages:
•Chinese (Simplified)
•English
•French
•German
•Italian
•Japanese
•Portuguese
•Spanish
•Russian

i1Pro Hardware Specifications

SPECTRAL ENGINE

i1 technology with built-in wavelengths check
Spectral analyzer: Holographic diffraction grating with 128-pixel diode array
Spectral Range: 380 - 730 nm
Physical sampling interval: 3.5 nm
Optical resolution: 10 nm
Spectral reporting: 380 ... 730 nm in 10 nm steps
Measurement Frequency in scanning mode: 200 measurements per second

 

OPTICS

Measurement geometry: 45°/0° ring illumination optics, ISO 13655:2009
Measurement aperture: 4.5 mm (0.18”) diameter (effective measurement aperture during scanning is depending on the patch size and measurement speed)
Illumination Spot Size: 3.5 mm (0.14”)
Light source: Gas filled tungsten (illuminant type A) and UV LED

 

REFLECTANCE MEASUREMENT

Data Format: Spectral Reflectance [dimensionless]

Measurement Conditions:
•UV included - ISO 13655:2009 measurement condition M0
•D50 - ISO 13655:2009 measurement condition M1
•UV excluded Filter - ISO 13655:2009 measurement condition M2

OBC: Optical Brightener Compensation (OBC) with i1Profiler software
Calibration: Manual on external ceramic white reference
Measurement Background: white, ISO 13655:2009; for measurements on backup board
Maximum Media Thickness: 3 mm (0.12”) on backup board
Minimum Patch Size in Scanning Mode: 7 x 10 mm (0.28” x 0.39”) (Width x Height) with sensor ruler 10 x 10 mm (0.39” x 0.39”) (Width x Height) without sensor ruler
Inter-instrument agreement: 0.4 ∆E94* average, 1.0 ∆E94* max. (deviation from X-Rite manufacturing standard at a temperature of 23ºC (73.4ºF) on 12 BCRA tiles (D50, 2º))
Short-term repeatability: 0.1 ∆E94* on white (D50,2°, mean of 10 measurements every 3 seconds on white)

 

EMISSIVE MEASUREMENT

Data format: Spectral radiance (mW/nm/m2 /sr); Luminance Y (cd/m2)
Measurement range: 0.2 - 1200 cd/m2 on a typical LCD-Monitor
Short-term repeatability: x,y: +/- 0.002 typical (5000°K, 80 cd/m2)

 

AMBIENT LIGHT MEASUREMENT

Data Format: spectral irradiance [mW/nm/m2], illuminance [lux]
Type: Cosine-corrected diffuse light measurement head

 

OPERATING CONDITIONS

Temperature: 10°C (50°F) – 35°C (95°F)
Humidity: 0% – 80% non-condensing

 

INTERFACE, DIMENSIONS AND WEIGHT

Interface: USB 1.1
Power supply: Device powered by USB. No additional charger or battery required. USB 1.1 high power device.

 

Physical dimensions

i1Pro device: Length 155 mm, width 66 mm, height 67 mm (6.1” x 2.6” x 2.6”)
i1 Ruler: Length 337 mm , width 102 mm (13.3” x 4.0”)
i1 Backup Board: 355 mm x 265 mm (14.0” x 10.4”) folded or 355 mm x 400 mm (14.0” x 15.7”) unfolded
Weight i1Pro device: 245 g (8.6 oz)