Makeblock 3D Printer nozzle Bracket A is designed specially for use as the bracket for a 3D Printer nozzle. This component is made from 6061 aluminum with a design for proper mounting and room for the nozzle extrusion. It has a high load capacity and is easy to mount.
The 3D printer that provides you what you really need - efficiency, high quality and easy print removal.
Easy, safe removal of 3D printed models due to flexible metal build plate
Maximise utilisation of the machine: Draft mode printing profile allows to print up to 30% faster than low resolution
Better print results: more intricate and detailed designs with the improved 50 micron ultra high print resolution combined with guided 2-point semi automated leveling
Optimal safety and less chance for warping of large objects thanks to fully enclosed sturdy plastic design with a 254 x 152 x 170 mm build volume
No installation needed: Fast out of the box use thanks to the easy setup supported by the user-friendly touchscreen control center on the hardware
This neoprene timing belt is perfect for hobby 3D printers, camera sliders, or other linear motion systems. It is open-ended so that each end can be attached to the printer head, camera slider, etc.
Makeblock has 5 different length open-end timing belt for choose. Moreover, Makeblock Timing Pulley are additionally recommended.
This neoprene timing belt is perfect for hobby 3D printers, camera sliders, or other linear motion systems. It is open-ended so that each end can be attached to the printer head, camera slider, etc.
Makeblock has 5 different length open-end timing belt for choose. Moreover, Makeblock Timing Pulley are additionally recommended.
This neoprene timing belt is perfect for hobby 3D printers, camera sliders, or other linear motion systems. It is open-ended so that each end can be attached to the printer head, camera slider, etc.
Makeblock has 5 different length open-end timing belt for choose. Moreover, Makeblock Timing Pulley are additionally recommended.
Implementing 3D printing just got easier. Introducing the Dremel 3D45 3D printer Education bundle, with lesson plans, professional development and easy-to-use software.
Implementing 3D printing just got easier. Introducing the Dremel 3D40 FLEX 3D printer Education bundle, with lesson plans, professional development and easy-to-use software.
Makeblock Solid Coupling 4x6mm is frequently used in positive and negative rotation or the transmission needed high sensitivity can connect the shaft 6mm or T6 lead screw and stepper motor in 3D printer toachieve high quality transmission.
Makeblock T6 L256mm Lead Screw and Brass Flange Nut Set can be self-locking, it is suitable for high torque requirements of transmission, such as the aixs for 3D printer. The lead screw also can carry larger load than the threaded rod.
Makeblock slider with copper sleeve is frequently used as the slider platform in linear motion can connect the shaft 8mm in 3D printer or support some parts such as stepper motors or brackets.
12 M4 holes on two sides of this slider are compatible with all Makeblock motion and structure components.