M-Audio SBX10 bass-reflex active powered subwoofer

• 10” fiberglass/paper composite cone driver with oversized magnet and high-temperature 2” long-throw voice coil
• 240-watt Class A/B amplifier with all-discrete transistor design
• flared rear bass-reflex port
• variable 50-200Hz crossover
• 20-200Hz low frequency response
• adjustable gain (-30dB to +6dB)
• balanced/unbalanced XLR, balanced/unbalanced 1/4” TRS and RCA inputs
• balanced/unbalanced XLR and balanced/unbalanced 1/4” TRS outputs allow easy setup of 2.1 monitoring systems
• includes subwoofer bypass footswitch
• phase switch (0°/180°)
• over-temperature protection
• vinyl-covered high-density internally braced 3/4” MDF cabinet with 1” front and back baffles
• removable grill
• removable feet

Specifications

type:
bass-reflex active powered subwoofer

woofer driver:
10-inch composite (treated paper/fiberglass) cone with high-temperature voice coil and damped rubber surround

frequency response:
20-200Hz (-3dB)

crossover:
HP/LP linked filter sweepable from 50-200Hz; 24dB/octave 4th-order alignment

input sensitivity:
80mV pink noise input produces 100dBA output SPL at one meter with volume control at maximum

adjustable gain:
(-30dB to +6dB)

amplifier:
240 watts average power into 4, discrete transistor design

signal-to-noise ratio:
96dB (A-weighted)

THD at rated power, mono mode:
0.019%

inputs:
two XLR balanced/unbalanced inputs; two TRS balanced/unbalanced inputs; two unbalanced RCA

outputs:
two XLR balanced/unbalanced outputs for satellites; two TRS balanced/unbalanced outputs for satellites

controls:
volume/gain control, phase inverse switch, variable crossover control, subwoofer bypass footswitch jack

input impedance:
20k ohms balanced, 10k ohms unbalanced

maximum input level:
+20dBU

protection:
over temperature, turn-on/off transient, subsonic filter, external mains fuse, DC protection, over current protection

indicator:
power on (blue) or standby/bypass (red)

power requirements:
dual-voltage (selectable by rear-panel switch) for either 100-120V/~50/60Hz or 220-240V/~50/60Hz; powered via detachable grounded IEC cable

cabinet:
vinyl-laminated high-density internally braced 3/4” MDF cabinet with 1” front and back baffles

dimensions:
15.5 in. (h) x 13 in. (w) x 17.25 in. (d); 39.4 cm (h) x 33 cm (w) x 43.8 cm (d)

shipping weight:
54.6 lbs.; 24.75 kg