Main Categories
    Filters
    Preferences
    Search

    Seeed Studio

     

    Seeed Studio encourages DIY makers around the world to grow their inspirations into various projects, using motors, sensors, shields, kits and more!

    View as Grid List
    Sort by
    Display per page

    Danger Shield Complete kits

    #ARD105B1P
    $15.99 $19.95
    ( 1 In stock)

    The Danger Shield is an add-on for the [Arduino] micro controller board. It contains a variety of fun and useful electronic circuits that you can use to do fun and useful things. It is a fully self-contained shield. You plug it into your Arduino, and you can immediately start using it. No extra things to hook up, no external components. Just a really rad board ready to rock.

    Grove - Infrared Reflective Sensor v1.2

    #101020174
    $3.59 $4.95
    ( 24 In stock)
    Grove - Infrared Reflective Sensor v1.2 can be used for detection of proximity and color of objects. The reflective photosensor - RPR-220 used in this module consists of an infrared light emitting diode and a high –sensitivity phototransistor. Light-colored objects directly in front of the sensor will reflect more infrared light as well as generate more current in the phototransistor than an object with dark-colored surfaces, this can be tell from a built-in indicator LED which will turn red with sufficient flow of current. Also, the intensity of the reflective light increases as the object getting closer. You can adjust the potential-meter on the back of the board if you want to detect a specific object (eg. Black line) at a certain distance.

    Seeed Studio Grove - 3-Axis Digital Compass

    #SEN12753P
    $10.99 $12.95
    ( 2 In stock)
    3-Axis Compass module, a member of grove family uses I²C based Honeywell HMC5883L digital compass. This ASIC is equipped with high resolution HMC118X magneto-resistive sensors and a 12-bit ADC. It provides compass heading accuracy up to 1° to 2°. Signal conditioning like amplification, automatic degaussing strap drivers and offset cancellation are inbuilt. This grove module also includes a MIC5205-3.3 for power supply requirement. Hence user can connect any 3.3V to 6V DC power supply.

    Seeed Studio Grove - BLE (dual model)

    #113020009
    $15.99 $19.95
    ( 1 In stock)
    Grove - BLE (dual model) v1.0 uses CSR dual mode Bluetooth chip,with the ARM architecture single chip which supports AT instructions, Users can develop flexibly according to the serial baud rate, equipment name, pairing password.

    Seeed Studio Grove - Blue LED

    #COM04051P
    $1.49 $2.95
    ( 4 In stock)

    A general purpose LED module in Grove form factor, available in different colors. The ingenious PCB design enables you to bend the LED to any position you want, which makes it easy to use it standalone, horizontal or Panel Mount(from left to right in below pics)

    Key Specification:

    • Standard Grove connector
    • Operate voltage: 3.3v/5v
    • Emitting Color: Blue

    Seeed Studio Grove - Button

    #COM22242P
    $1.49 $2.95
    ( 4 In stock)
    This new version of button twig contains one independent button, which are configured with pull-down resistor ? Ready for use with our microcontrollers as digital input. The button signals the SIG wire,NC is not used on this twig.

    Seeed Studio Grove - Button(P)

    #COM08211P
    $1.49 $2.95
    ( 5 In stock)
    What does “P” mean? “P” is for “panel mount” in this product. This Grove – Button is a sister version of original Grove - Button. They are identical except the Grove connecter is moved to the back so that you can easily use it as a neat and wire-free human interface device.

    Seeed Studio Grove - Buzzer

    #COM22458P
    $1.49 $2.95
    ( 1 In stock)
    This is a simple yet enjoyable twig to use. The piezo can be connected to digital outputs, and will emit a tone when the output is high. Alternatively it can be connected to an analog pulse-width modulation output to generate various tones and effects.

    Seeed Studio Grove - Dust Sensor

    #SEN12291P
    $11.99 $14.95
    ( 22 In stock)
    Sensor is to create Digital (Lo Pulse) output to Particulate Matters (PM). Lo Pulse Occupancy time (LPO time) is in proportion to PM concentration. The output is for PM whose size is around 1 micro meter or larger. We can use the sensor to detect the dust in clean room.

    Seeed Studio Grove - EMG Detector

    #811006001
    $32.99 $39.95
    ( 2 In stock)

    EMG detector is a bridge connects human body and electrical, the sensor gathers small muscle signal then process with 2th amplify and filter, the output signal can be recognized by Arduino. You can add this signal into your control system. Note: The sensor cannot be used for medical purposes. In standby mode, the output voltage is 1.5V. When detect muscle active, the output signal rise up, the maximum voltage is 3.3V. You can use this sensor in 3.3V or 5V system.

     

    Key Features:

    • Grove Compatible
    • 3.5mm Connector
    • 6 Disposable Surface Electrodes
    • Power supply voltage: 3.3V-5V
    • 1000mm Cable Leads
    • No additional power supply

    Seeed Studio Grove - Hall Sensor

    #SEN14034P
    $4.49 $5.95
    ( 1 In stock)

    The Hall Sensor measures the Hall Effect, which is a production of a voltage difference across an electrical conductor, transverse to an electric current in the conductor as well as a magnetic field perpendicular to the current. The output of the continuous-time switch Hall sensor on this Twig switches low and turns on when a magnetic field (south polarity) perpendicular to the Hall sensor exceeds the BOP threshold, and it switches high and turn on when the magnetic field disappears.

    Key Features:

    • Grove compatible interface
    • 400ns transition period for rise and fall.
    • Continuous-time hall effect sensor

    Application Ideas:

    • RPM meter.
    • Simple dc motor.

    Seeed Studio Grove - I2C Color Sensor

    #SEN60256P
    $14.99 $17.95
    ( 2 In stock)

    This module is based on the color sensor TCS3414CS with digital output I2C. Based on the 8*2 array of filtered photodiodes and 16-bits analog-to-digital converters, you can gain the color chromaticity of ambient light or the color of objects. Of the 16 photodiodes, 4 have red filters, 4 have green filters, 4 have blue filters and 4 have no filter(clear). With the synchronization input pin, external pulsed light source can provides precise synchronous conversion control.

    Key Features:

    • Grove compatible interface
    • 16-Bit digital output with I 2C at 400 kHz
    • SYNC Input Synchronizes Integration Cycle to Modulated Light Sources
    • Operating temperature range -40°C to 85°C
    • Programmable interrupt function with User-Defined Upper and lower threshold settings

    Seeed Studio Grove - I2C Hub

    #ACC53133P
    $2.49 $3.95
    ( 2 In stock)
    I2C Hub Grove is an extension Grove module for connecting multiply I2C devices to Grove Base Shield. It can use with Universal 4 Pin to X2 4 Pin cable and connects up to 7 I2C divices which may cover most developing purpose.

    Seeed Studio Grove - IR Distance Interrupter

    #SEN09281P
    $4.49 $5.95
    ( 5 In stock)
    This IR Distance Interrupter features a high-sensitivity RFR-359F photoreflector to perform distance detection function. The photoreflector consists of a GaAs infared light emitting diode and a silicon planar phototransistor. When the infrared light emitted by the emitter gets reflected on a surface that blocked it, the phototransistor can pick up the signal for distance calculation. This module is panel mounted so that you can easily implement it on the surface of robots or other projects without wiring clutter. Also a potentiometer for adjustment and an indicator LED are arranged on the back for easy and clear use.

    Seeed Studio Grove - LCD RGB Backlight

    #811004001
    $9.99 $12.95
    ( 9 In stock)
    Done with tedious mono color backlight? This Grove enables you to set the color to whatever you like via the simple and concise Grove interface. It takes I2C as communication method with your microcontroller. So number of pins required for data exchange and backlight control shrinks from ~10 to 2, relieving IOs for other challenging tasks. Besides, Grove - LCD RGB Backlight supports user-defined characters. Want to get a love heart or some other foreign characters? Just take advantage of this feature and design it!

    Seeed Studio Grove - Mini Fan

    #811005001
    $6.49 $8.95
    ( 2 In stock)
    Grove - Mini Fan is a DC motor driver base on AVR microcontroller Atmega168,you can change code by breakout , this module also reserve servo connector,it can driver servo by change code ,Grove - Mini Fan is design for kids, which is use soft fan-leafed in order to avoid unnecessary damage.

    Seeed Studio Grove - OLED Display 0.96"

    #OLE42178P
    $10.49 $14.95
    ( 3 In stock)
    Grove - OLED 0.96'' is a 16 color grayscale 96×96 dot matrix OLED display module with Grove compatible 4pin I2C interface.Grove - OLED 0.96" is constructed with 96 x 96 dot matrix OLED module ([ LY120])and SSD1327 driver IC. The characteristics of this display module are high brightness, self-emission, high contrast ratio, slim / thin outline, wide viewing angle, wide temperature range, and low power consumption.

    Seeed Studio Grove - OLED Display 1.12"

    #OLE35046P
    $10.49 $14.95
    ( 6 In stock)

    Grove - OLED Display 1.12" is an OLED monochrome 128×64dot matrix display module with Grove 4pin I2C Interface .The characteristics of this display module are high brightness, self-emission, high contrast ratio, slim outline, wide viewing angle, wide temperature range, and low power consumption. It has bigger screen and uses all the columns from the SSD1308 chip so that it can display more contents than the OLED 96×16.

    Key Features:

    • Grove compatible
    • Small size
    • I2C Interface
    • Low power consumption

    Seeed Studio Grove - PIR Motion Sensor

    #SEN32357P
    $6.49 $8.95
    ( 4 In stock)
    This is a simple to use PIR motion sensor with Grove compatible interface. Simply connect it to Stem shield and program it, when anyone moves in its detecting range, the sensor outputs HIGH on its SIG pin. The detecting range and response speed can be adjusted by 2 potentiometers soldered on its circuit board, The response speed is from 0.3s - 25s, and max 6 meters of detecting range.

    Seeed Studio Grove - Red LED

    #COM04054P
    $1.49 $2.95
    ( 4 In stock)

    Grove - LED is designed for the beginners of Arduino/Seeeduino to monitor controls from digital ports. It can be mounted to the surface of your box or desk easily and used as pilot lamp for power or signal. Its brightness can be adjusted by potentiometer.

    Features:

    • Grove compatible interface
    • 3.3V/5V Compatible
    • Adjustable LED orientation
    • Adjustable LED brightness

    Seeed Studio Grove - RTC

    #SEN12671P
    $4.99 $6.95
    ( 15 In stock)
    The RTC module is a member of Twig. It is based on the clock chip DS1307 which supports the I2C protocol. It uses a Lithium cell battery (CR1225). The clock/calendar provides seconds, minutes, hours, day, date,month, and year information. The end of the month date is automatically adjusted for months with fewer than 31 days, including corrections for leap year. The clock operates in either the 24-hour or 12-hour format with AM/PM indicator.

    Seeed Studio Grove - Servo

    #ROB08211P
    $6.99 $8.95
    ( 1 In stock)
    Grove - Servo is a bonus product for Grove lovers. We regulated the three-wire servo into a Grove standard connecter. You can plug and play it as a typical Grove module now, without jumper wires clutter. For all Grove users (especially beginners), we provide you guidance PDF documents. Please download and read through Preface - Getting Started and Introduction to Grove before your using of the product.

    Seeed Studio Grove - Switch(P)

    #COM08213P
    $1.99 $3.95
    ( 3 In stock)
    What does “P” mean? “P” is for “panel mount” in this product. This Grove – Switch is a mini SPDT slide, great for “ON/OFF” situations. It’s such a reliable switch of great build quality that we adopt it on many of our boards. You should stock some for your Grove prototyping system.

    Seeed Studio Grove - Temp&Humi Sensor

    #SEN11301P
    $4.49 $6.95
    ( 7 In stock)

    This temperature & humidity sensor provides a pre-calibrated digital output. A unique capacitive sensor element measures relative humidity and the temperature is measured by a negative temperature coefficient (NTC) thermistor. It has excellent reliability and long term stability. Please note that this sensor will not work for temperatures below 0 degree.

    Features:

    • Relative Humidity and temperature measurement
    • Full range temperature compensation Calibrated
    • Digital signal Long term stability
    • Long transmission distance
    • Low power consumption

    Seeed Studio Grove - Temperature & Humidity Sensor -

    #101020074
    $8.49 $11.95
    ( 4 In stock)
    This is a multifunctional sensor that gives you temperature and relative humidity information at the same time. It utilizes a TH02 sensor that can meet measurement needs of general purposes. It provides reliable readings when environment humidity condition inbetween 0-80% RH, and temperature condition inbetween 0-70°C, covering needs in most home and daily applications that don't contain extreme conditions.

    Seeed Studio Grove - Universal 4 Pin 20cm Unbuckled Cable - Pack of 5

    #ACC11317O
    $1.99 $2.95
    ( 1 In stock)
    Compared with the Electronic Brick system, the Grove System uses only 1 type of cable, (the Electronic Brick system uses 4). These cables are compatible with all modules included in the Grove system.

    Seeed Studio Grove - Universal 4 Pin Buckled 5cm Cable - Pack of 5

    #ACC83054O
    $1.49 $2.95
    ( 12 In stock)
    The Universal 4 Pin Buckled Cable is made for the Grove System to connect all of the Twigs to the Stem - Basic Shield or to other Twig compatible boards for quick prototyping. As a lot of users ask for different length of cables, so we made the 5cm,20cm,30cm,40cm,and 50cm cables for different applications.

    Seeed Studio Grove - Vibration Motor

    #ROB51043P
    $2.49 $3.95
    ( 8 In stock)
    It is consist one coin type motor which is a Permanent Magnet coreless DC motor. It vibrates when the input is logic HIGH. It is very easy to drive and Grove compatible. Can be used in toys and cell phone modules.

    Seeed Studio Grove - Water Sensor

    #SEN11304P
    $2.49 $3.95
    ( 6 In stock)

    This water sensor module is part of the Twig system. This sensor works by having a series of exposed traces connected to ground and interlaced between the grounded traces are the sens traces. The sensor traces have a weak pull-up resistor of 1 MΩ. The resistor will pull the sensor trace value high until a drop of water shorts the sensor trace to the grounded trace. Believe it or not this circuit will work with the digital I/O pins of your Arduino or you can use it with the analog pins to detect the amount of water induced contact between the grounded and sensor traces.

    Features

    • Grove compatible interface
    • Low power consumption
    • 2.0cm x 2.0cm twig module
    • High sensitivity

    Applications Ideas

    • Rainfall detecting
    • Liquid leakage
    • Tank overflow detector

    Seeed Studio Grove Cape for BeagleBone Series

    #811001001
    $14.99 $17.95
    ( 6 In stock)
    A true open hardware ,BeagleBone Series is credit-card-sized Linux computer that connects to the Internet and runs software such as Android 4.0 and Ubuntu. With plenty of I/O and processing power for real-time analysis provided by an AM335x 720MHz ARM® processor, BeagleBone can be complemented with cape plug-in boards to augment functionality. And this Grove - Grove Cape for BeagleBone Series is an expansion board for BeagleBone Series to work with abundant Grove resources. There are 6 ready Grove sockets on the board cevering functions like UART, I2C and ADC. And in this way, all Grove Modules are accessible for the BeagleBone board. Wanna make some projects with BeagleBone and need some sensors or display? This Grove - Grove Cape for BeagleBone Series can bring you this convenience.

    Seeed Studio Grove Conversion Cable - Pack of 5 (4 pin Female Jumper to Grove 4 pin)

    #ACC17112O
    $2.99 $4.95
    ( 9 In stock)

    With this wire, you can easily connect all of Seeed Grove modules to any 2.54mm pitch connectors. 5 PCs is included in one pack.Length of each wire is 20cm. Note: Grove side uses buckled connector.

    Seeed Studio Shield Bot

    #SLD01091P
    $54.99 $64.95
    ( 16 In stock)

    Compared with the previous version, The Shield Bot V1.1 can use the usb port of PC to charge battery. And the charging efficiency is greatly improved after we optimize the circuit. And you can use the Arduino/Seeeduino Vin pin to fast charge.

    Note: Compatible Arduino Board not included, try the Seeeduino.

    Seeed Studio Solar Charger Shield v2.2

    #106990020
    $9.49 $12.95
    ( 3 In stock)
    The solar charger is a stackable shield to Arduino compatible platforms, enables adaptive battery power and act as energy harvester for in-field charging. You may use various batteries that has the voltage of 3.0V-4.2V to shift up for 5V output, or put on Li-ion battery and solar panel to form an autonomous sensor unit. The maximum current provided by the board can get up to 600mA. An usb connector is also useful to charge the battery.

    Seeed Studio Xadow - UV Sensor

    #SEN07113P
    $8.99 $12.95
    ( 8 In stock)
    Xadow UV Sensor is suitable for measuring the UV radiation in sunlight. It can detect the UV wavelength of 290 ~ 400 nm. The UV Sensor is outputting digital voltage value corresponding to UV light intensity. With the diagram of output voltage and UV, we can easy to know the current UV index. The Xadow UV Sensor can be powered by 3.3V. And it is compatible with Xadow system.