Close
Main Categories
    Filters
    Preferences
    Search

    BASIC Stamp 1 Serial Adapter

    $7.95

    BASIC Stamp 1 Serial Adapter provides serial port based programming capability from a PC running Windows to a BASIC Stamp 1. The BASIC Stamp 1 microcontroller is designed to be programmed from a parallel port on a DOS-based PC. Since then, PC technology has evolved greatly so the BASIC Stamp 1 Serial Adapter can now program the BASIC Stamp 1 via a PC's serial port using the Windows-based BASIC Stamp Editor. One end plugs into a serial cable and the other onto a 3-pin header provided on BASIC Stamp 1 development boards.

    MFR Part #: 27111
    • Male DB9 to male 3-pin header adapter
    • Voltage requirements: Powered by PC serial port (RS-232 powered)
    • Current requirements: n/a
    • Communication: RS-232C to TTL
    • Dimensions: 1.65 x 0.70 x 0.4 in (4.19 x 1.78 x 1.02 cm)
    • Operating temp range: +32 to +158 °F (0 to +70 °C)

    Note: BASIC Stamp 1 debugging operates in a single direction only (BS1 to PC). Additionally, the BASIC Stamp 1 Serial Adapter cannot be used to transmit and receive serial data via the BASIC Stamp's SERIN/SEROUT commands.

     

    Features of BASIC Stamp 1 Serial Adapter

    • Easy interface between serial ports and the BASIC Stamp 1
    • Supported by the BASIC Stamp Editor (Windows)
    • Works with the Parallax USB to Serial (RS-232) Adapter (#28030)
    • Provides downloading and debugging capability
    Write your own review
    • Product can be reviewed only after purchasing it
    • Only registered users can write reviews
    • Bad
    • Excellent
    • Male DB9 to male 3-pin header adapter
    • Voltage requirements: Powered by PC serial port (RS-232 powered)
    • Current requirements: n/a
    • Communication: RS-232C to TTL
    • Dimensions: 1.65 x 0.70 x 0.4 in (4.19 x 1.78 x 1.02 cm)
    • Operating temp range: +32 to +158 °F (0 to +70 °C)

    Note: BASIC Stamp 1 debugging operates in a single direction only (BS1 to PC). Additionally, the BASIC Stamp 1 Serial Adapter cannot be used to transmit and receive serial data via the BASIC Stamp's SERIN/SEROUT commands.

     

    Features of BASIC Stamp 1 Serial Adapter

    • Easy interface between serial ports and the BASIC Stamp 1
    • Supported by the BASIC Stamp Editor (Windows)
    • Works with the Parallax USB to Serial (RS-232) Adapter (#28030)
    • Provides downloading and debugging capability