Close
Main Categories
    Filters
    Preferences
    Search

    Arduino Nano

    $19.07

    Arduino Nano is a small, complete, and breadboard-friendly board based on the ATmega328 (Arduino Nano 3.x) or ATmega168 (Arduino Nano 2.x). It works with a Mini-B USB cable instead of a standard one. This Nano was designed and is being produced by Gravitech.

    MFR Part #: A000005

    Specifications for Arduino Nano

     

    • Microcontroller: ATmega168 or ATmega328
    • Operating Voltage: 5V
    • Input Voltage (recommended): 7-12 V
    • Input Voltage (limit): 6-20 V
    • Digital I/O Pins: 14
    • PWM Digital I/O Pins: 6
    • Analog Input Pins: 8
    • DC Current per I/O Pin: 40 mA
    • Flash Memory: 16 kB (ATmega168) or 32 kB (ATmega328)
    • Flash Memory for Bootloader: 2 kB
    • SRAM: 1 kB (ATmega168) or 2 kB (ATmega328)
    • EEPROM: 512 bytes (ATmega168) or 1 kB (ATmega328)
    • Clock Speed: 16 MHz
     

    Features of Arduino Nano

     

    • A small, complete, and breadboard-friendly board based on the ATmega328 (Arduino Nano 3.x) or ATmega168 (Arduino Nano 2.x)
       
    • The same functionality of the Arduino Duemilanove, but in a different package
       
    • Does not have a DC power jack
       
    • Works with a Mini-B USB cable instead of a standard one
       
    • This Nano was designed and is being produced by Gravitech
       
    • Powered via the Mini-B USB connection, 6-20V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27)
       
    • Each of the 14 digital pins on the Nano can be used as an input or output, using pinMode, digitalWrite, and digitalRead functions
       
    • They operate at 5 volts
       
    • Each pin can provide or receive a maximum of 40 mA and has an internal pull-up resistor (disconnected by default) of 20-50 kOhms
    Write your own review
    • Product can be reviewed only after purchasing it
    • Only registered users can write reviews
    • Bad
    • Excellent

    Specifications for Arduino Nano

     

    • Microcontroller: ATmega168 or ATmega328
    • Operating Voltage: 5V
    • Input Voltage (recommended): 7-12 V
    • Input Voltage (limit): 6-20 V
    • Digital I/O Pins: 14
    • PWM Digital I/O Pins: 6
    • Analog Input Pins: 8
    • DC Current per I/O Pin: 40 mA
    • Flash Memory: 16 kB (ATmega168) or 32 kB (ATmega328)
    • Flash Memory for Bootloader: 2 kB
    • SRAM: 1 kB (ATmega168) or 2 kB (ATmega328)
    • EEPROM: 512 bytes (ATmega168) or 1 kB (ATmega328)
    • Clock Speed: 16 MHz
     

    Features of Arduino Nano

     

    • A small, complete, and breadboard-friendly board based on the ATmega328 (Arduino Nano 3.x) or ATmega168 (Arduino Nano 2.x)
       
    • The same functionality of the Arduino Duemilanove, but in a different package
       
    • Does not have a DC power jack
       
    • Works with a Mini-B USB cable instead of a standard one
       
    • This Nano was designed and is being produced by Gravitech
       
    • Powered via the Mini-B USB connection, 6-20V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27)
       
    • Each of the 14 digital pins on the Nano can be used as an input or output, using pinMode, digitalWrite, and digitalRead functions
       
    • They operate at 5 volts
       
    • Each pin can provide or receive a maximum of 40 mA and has an internal pull-up resistor (disconnected by default) of 20-50 kOhms