Main Categories
    Filters
    Preferences
    Search

    Blackhawk Robotics Expansion Board for myRIO

    Studica Blackhawk Expansion Board is a programmable expansion add on for your Mobile Robot.The board is used with the Studica MD2 driver board and the NI myRIO to control servo motors and to add additional sensor expansion and I/O including limit switches and relays.

    Requires Studica MD2 Driver Board and NI myRIO with LabVIEW and the Studica Toolkit.

      MFR Part #: 71000
      $299.00
      Availability: In stock

      The Studica Robotic Expansion Board features:

      • 5V - 3A Servo power that supports to 2 additional servos
      • 5V - 5A additional power output
      • 5V and 12V FPV camera power
      • Dedicated myRIO and Radio power ports to power both devices easily
      • 3 Digit Voltmeter to give the current battery voltage
      • Reverse Voltage Protection
      • 3 on board Relays, 1 of the Relays can be changed into a timed switch for an indicator light by flipping the switch next to the relay to enable the timer.
      • Arduino like Microcontroller on board to give sensor feedback to the myRIO
      • 4 Sharp Sensor ports
      • 2 Studica Line Follower Sensorports
      • 16 Pulled high Limit Switch ports
      • Arduino 1.0 Header
      • Superfast 84 MHz speed
      • Dedicated I2C header to plug directly into the I2C header of the MD2 board
      Write your own review
      • Product can be reviewed only after purchasing it
      • Only registered users can write reviews
      *
      *
      • Bad
      • Excellent

      The Studica Robotic Expansion Board features:

      • 5V - 3A Servo power that supports to 2 additional servos
      • 5V - 5A additional power output
      • 5V and 12V FPV camera power
      • Dedicated myRIO and Radio power ports to power both devices easily
      • 3 Digit Voltmeter to give the current battery voltage
      • Reverse Voltage Protection
      • 3 on board Relays, 1 of the Relays can be changed into a timed switch for an indicator light by flipping the switch next to the relay to enable the timer.
      • Arduino like Microcontroller on board to give sensor feedback to the myRIO
      • 4 Sharp Sensor ports
      • 2 Studica Line Follower Sensorports
      • 16 Pulled high Limit Switch ports
      • Arduino 1.0 Header
      • Superfast 84 MHz speed
      • Dedicated I2C header to plug directly into the I2C header of the MD2 board
      Customers who bought this item also bought

      Multi-Mode Smart Servo

      #75002
      $23.99
      ( 32 In stock)

      The Studica Robotics Multi-Mode Smart Servo features all-steel gears and large amounts of torque. 

      Clamping Shaft Hub

      #76281
      $7.99
      ( 22 In stock)

      Made of aluminum, the Studica Robotics Clamping Shaft Hub is used with flex and drive wheels.

      Light Weight Shaft Hub - 2 Pack

      #76282-2
      $7.99
      ( 45 In stock)

      The Studica Robotics Light Weight Shaft Hub (2 pack) are used with 6mm D shafts. They have a 5mm set screw for tight clamping and seven M3 tapped mounting holes.

      Enhanced Wheel Hub Kit

      #76291
      $14.99
      ( 25 In stock)

      The Studica Robotics enhanced wheel hub kit is ideal for use with the Omni and Mecanum wheels for a strong axle hold.

      6mm D-Shape Collar Clamp

      #76320
      $4.99
      ( 49 In stock)

      The Studica Robotics 6mm D-shape collar clamp cay be used with the 6mm D-Shape Shaft to secure wheels in their position.

       

       

      30 Tooth GT2-6mm Timing Belt Pulley

      #76451
      $8.99
      ( 23 In stock)

      The Studica Robotics 30-Tooth GT2-6mm Timing Belt Pulley can be used with any of the GT2 belts in your robotics builds.

      40 Tooth GT2-6mm Timing Belt Pulley

      #76452
      $9.99
      ( 21 In stock)

      The Studica Robotics 40-Tooth GT2-6mm Timing Belt Pulley can be used with any of the GT2 belts in your robotics builds.

      60 Tooth GT2-6mm Timing Belt Pulley

      #76453
      $10.99
      ( 17 In stock)

      The Studica Robotics 60-Tooth GT2-6mm Timing Belt Pulley can be used with any of the GT2 belts in your robotics builds.

      GT2-6mm Smooth Idler Pulley, H Type, w/3mm Inner Bore Bearing

      #76455
      $6.99
      ( 25 In stock)

      The Studica Robotics GT2-6mm Smooth Idler Pulley, H Type, w/3mm Inner Bore Bearing is ideal for your robotics design builds.