Close
Main Categories
    Filters
    Preferences
    Search

    Brackets

    View as Grid List
    Sort by
    Display per page

    120 Degree Bracket (2 pack)

    #76080-2
    $12.99
    (13 In stock)

    The 120 Degree Bracket is perfect for connecting two channel pieces at 120 degrees from each other. Each side is 48mm wide to fit perfectly on the channel. Use three brackets with 3 channel pieces to make 3 wheeled robots. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.

     

    Specifications:

     

    • Material - Anodized 6061-T6 Aluminum
    • Thickness - 3mm
    • Step File

    135 Degree Bracket (2 pack)

    #76082-2
    $6.99
    (12 In stock)

    The 135 Degree Bracket is perfect for connecting two channels pieces at 45 degrees from each other. Each side is 48mm wide to fit perfectly on the channel. Used for intake systems, elevator systems, or structure where 45 degrees is required. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.


    Specifications:

    • Material - Anodized 6061-T6 Aluminum
    • Thickness - 3mm
    • Step File

    90 Degree Bracket (2 pack)

    #76081-2
    $6.99
    (16 In stock)

    The 90 Degree Bracket is perfect for connecting two channels pieces at 90 angle from each other. Each side is 48mm wide to fit perfectly on the channel. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.

    Specifications:

    • Material - Anodized 6061-T6 Aluminum
    • Thickness - 3mm
    • Step File

    96mm Adjustable Flat Bracket (2 pack)

    #76083-2
    $5.49
    (14 In stock)

    The Studica Adjustable Angle Flat Bracket is perfect for connecting two channels pieces together at various angles. It is 3mm thick and as with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.

    Specifications:

    • Material - Anodized 6061-T6 Aluminum
    • Thickness - 3mm
    • Width - 48mm
    • Length - 96mm
    • Step File

    Bracket Pack

    #70262
    $189.00
    (In stock)

    The Studica Robotics Bracket Pack includes various degree brackets, flat brackets, L brackets, U brackets a T and an X bracket, ideal for your robotics designs.

    Makeblock Base Bracket B

    #14403
    $3.99 $4.99
    (3 In stock)

    The Makeblock Base Bracket B is a multi-purpose bracket which can be used for Arduino, Meduino, Me BaseBoard, as a Battery Holder, and even Raspberry Pi. Base Bracket B is bigger than Base Bracket A and has more holes to connect with electronic boards and mechanical parts. Additionally, the two biggest holes in the bracket will allow the RJ25 cables to go through.

    Makeblock Bracket P1 - Blue (Pair)

    #62400
    $3.99 $4.99
    (14 In stock)

    Makeblock Bracket P1 is a convenient fastener. These specially designed brackets help create connections within your maker project. They are compatible with most Makeblock motion and structural parts.

    Makeblock Bracket Robot Pack - Blue

    #95045
    $22.99 $24.99
    (1 In stock)

    The Makeblock Bracket Robot Pack contains most frequently used brackets and plates in Makeblock platform, which you can use to make special constructions.

    Makeblock U Bracket B - (Blue) (Pair)

    #61520
    $3.99 $4.99
    (53 In stock)

    The Makeblock U Bracket B is usually used as the structural support or connection point for shafts, timing pulley 18T, timing pulley 62T, timing pulley 90T and so on. It has seven 8mm center holes that can be attached with 8mm shaft or bearings.

    Makeblock U-Bracket-C.

    #61522
    $3.99 $4.99
    (79 In stock)
    This Makeblock U-Bracket C can operate with 8mm shaft, 8mm bearing and 16mm bearing for mounting 4mm or 8mm shaft. This U-Bracket is made with alluminum alloy material, it can vertically bear high pressure.

    Makeblock φ10 Cylinder Bracket L1 - Blue

    #62435
    $3.99 $4.99
    (5 In stock)

    φ10 Cylinder Bracket L1 is suitable for cylinders with a bore size of 10mm (such as Makeblock Double Acting Mini Cylinder MI10X60CA). As a L-shaped bracket, it can be installed on the head, the bottom, or both sides of a cylinder. The long-hole design ensures the bracket to be compatible with Beam0824 and Beam 2424, hence realizes the function of fixing the cylinder.


     

    Makeblock φ16 Cylinder Bracket L1 - Blue

    #62436
    $3.99 $4.99
    (5 In stock)

    φ16 Cylinder Bracket L1 is suitable for cylinders with a bore size of 10mm (such as Makeblock Double Acting Mini Cylinder MI16X100CA). As a L-shaped bracket, it can be installed on the head, the bottom, or both sides of a cylinder. The long-hole design ensures the bracket to be compatible with Beam0824 and Beam 2424, hence realizes the function of fixing the cylinder.
     

    X Bracket (2 pack)

    #76085-2
    $13.99
    (17 In stock)

    The X Bracket is perfect for connecting four channels pieces together. Each of the 4 sections is 48mm wide and the overall dimmension is 144mm x 144mm.

     

    Specifications:

    • Material - Anodized 6061-T6 Aluminum
    • Thickness - 3mm
    • Step File

    Inside L Bracket (2 pack)

    #76089-2
    $5.99
    (8 In stock)

    Made from 3mm thick heavy 6061-T6 Aluminum, the Inside L Bracket is 42mm x 45mm and is used inside the U Channel or Low profile channel.As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.

     

    Specifications:

    • Material - Anodized 6061-T6 Aluminum
    • Thickness - 3mm
    • Step File

    Inside U Bracket (2 pack)

    #76086-2
    $5.99
    (11 In stock)

    Made from 3mm thick heavy 6061-T6 Aluminum, the Inside U Bracket is 42mm x 45mm and is used inside the U Channel or Low profile channel.. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.

     

    Specifications:

     

    • Material - Anodized 6061-T6 Aluminum
    • Thickness - 3mm
    • Step File

    T Bracket (2 pack)

    #76084-2
    $9.99
    (8 In stock)

    The T Bracket is perfect for connecting two or three channels together. Each side is 48mm wide to fit on the U Channel, low profile channel or other brackets. The overall size is 144mm x 96mm

     

    Specifications:

    • Material - Anodized 6061-T6 Aluminum
    • Thickness - 3mm
    • Step File