Features:

• Made of stainless steel.
• Can drill into 4mm holes.
• Compatible with thread drive beam.
• Lengh: 240mm

This motion shaft of 8 mm in diameter and 128mm in length is suitable for using as shaft, supporting part or using with slide units in motion applications. It is made from high-carbon steel and chrome plated for corrosion resistance, case hardened for wear resistance and precision ground for consistent ball bushing radial clearance.

Features:

• Round steel shaft for using as shaft, supporting part or using with slide units in motion applications
• Chrome plated for corrosion resistance
• Case hardened for wear resistance

This shaft of 8 mm in diameter and 272mm in length is suitable for using as shaft, supporting part, or using with slide units in motion applications. It is made from high-carbon steel and chrome plated for corrosion resistance, case hardened for wear resistance.

Features:

• With M4 thread holes on both ends
• Round steel shaft for using as shaft, supporting part, or using with slide units in motion applications
• Chrome plated for corrosion resistance
• Case hardened for wear resistance

This motion shaft of 8 mm in diameter and 96mm in length is suitable for using as shaft or supporting part. It is made from high-carbon steel and chrome plated for corrosion resistance, case hardened for wear resistance.

Features:

• Round steel shaft for using as shaft or supporting part
• Chrome plated for corrosion resistance
• Case hardened for wear resistance

• Made from 6061 aluminum, 2mm thick, anodized surface.
• With holes on 8mm increments,  can be drilled for 4mm hardware.
• Sold in pack of 10.

M4 plain washer is generally used together with with M4 bolts and nuts to reduce the pressure intencity and protect the beam surface.

Specifications:

• Type: Plain Washer
• Material: Steel 
• Thickness: 0.4 mm 
• Outer diameter: 9.0 mm 
• Inner diameter: 4.2 mm

M8 elastic washer is generally used together with with M8 bolts, which will not get loose in vibrating.

Specifications:

• Type: Elastic Washer
• Material: Steel 
• Thickness: 2.2 mm 
• Outer diameter: 12.7 mm 
• Inner diameter: 8.3 mm

M8 plain washer is generally used together with with M8 bolts and nuts to reduce the pressure intencity and protect the beam surface.

Specifications:

• Type: Plain Washer
• Material: Steel 
• Thickness: 1.5 mm 
• Outer diameter: 15.7 mm 
• Inner diameter: 8.4 mm

The Makeblock Me 4 Button can be used in a variety of projects. The Me 4 Button can work as function button or direction button to control your robots. There are 4 momentary buttons on the PCB board which have a great “click” to them. They all share an analog output and different analog values reflect different buttons. You can easily connect it to Me BaseBoard V1.0 or Me BaseShield V2.0 by 6 Pin RJ25 cable.

The Makeblock Me Compass is a 3-axis digital compass. The main chip is Honeywell HMC5883L. On-board regulator provides stable power for HMC5883L.

The Makeblock Me Infrared Receiver Decode module is designed for receiving infrared signals and controlling the robotics from the infrared remote control. The Infrared Receiver Decode can receive signals well within 10 meters. It may be unable to obtain signal from further than 10 meters. The Makeblock Me Infrared Receiver Decode is simple to wire, easy to program, the controller is compatible with Arduino.

The Makeblock Me RGB LED V1 is a shiny Me series module which has 4 full color ws2812 RGB LEDs. It has an integrated chip giving you control of each LED individually to adjust its brightness and create any color by mixing different amounts of red, green, blue.

Me Slide Potentiometer is one type of potentiometer that can be used to control volume, light intensity, motor speed, movement control, etc. in interactive projects.

Features

• Compatible with the Arduino sensor expansion board;

• Three 4mm mounting holes and one RJ25 port for easy assembling;

• With one red power indicator and one blue potentiometer indicator;

• Anti-reverse connection protection feature.

How Does It Work?

This Me Slide Potentiometer can be combined with Me Orion (or other Arduino IO/sensor expansion board) in interactive projects. Move the lever from one side to the other, its output voltage will range between 0 V to the VCC you apply. The VCC Me Slide Potentiometer supports vary from 3.3V to 5V.
 

Note

If you connect this module to Me Orion, please make sure you connect it to port 6, port 7 or port 8.

The Makeblock Me Touch Sensor will be triggered by finger touch. Users can also connect the "TOUCH" pinhole to metal and touch the metal to trigger the sensor. This touch sensor give you the ability to adjust the sensitiity to fit your project. It needs 0.5s for the self-calibration after energized.

This module is a shield of Arduino UNO. It can turn Arduino pins into Makeblock RJ25 ports. You can connect Arduino UNO with Makeblock electronic modules. This shield provides a stable power, so it can drive many servos and motors.