Makeblock Solid Coupling 4x6mm is frequently used in positive and negative rotation or the transmission needed high sensitivity can connect the shaft 6mm or T6 lead screw and stepper motor in 3D printer toachieve high quality transmission. 

Makeblock Starter Robot Kit is the ideal kit for those interested in exploring robotics and the maker world. With a set of beginner-friendly instructions, this kit takes beginner builders through learning robotics, electronics and programming. It is even compatible with some of the world's leading, open-source solutions including Scratch 2.0 programming and Arduino micro-controller boards. The Starter Robot Kit also allows you to build two different robots, a robot tank or the three-wheeled robot car. Get excited about robotics with this comprehensive robotic kit

Just like the other Makeblock mechanical parts, this little blue Stiffener is also made of anodized aluminum alloy. It will come in handy when you need to strengthen the joint of two parts, so that the whole structure will be more stable and maintain longer. Each side of the Stiffener has a M4 threaded hole, so it works great with most Makeblock mechanical parts, including metal beams, plates and brackets, etc., or other mechanical parts with M4 threaded holes.

The Makeblock M4 Thread Drive Beam is designed to mate with M4 thread rod to transmit motion from a motor to the beam. With other 4mm through holes, you can easily mount it to other makeblock components to complete your DIY projects.

• Made from 6061 aluminum extrusion, anodized surface. Excellent strength and twist resistance.
• With thread hole in the middle that compatible with the Fully Threaded Rod.
• Other holes without thread can be drilled for 4mm shaft.
• Threaded slot enables easy and flexible connection.
• Cross-sectional area 8x8mm, length 80mm.

This Makeblock pack included two Fully Threaded Rods, two Linear Motion Shaft, a Universal Joint and a Thread Drive Beam.

Threaded Shaft 4x39mm is an alternative fastener for your maker project. With a threaded end and a smooth end, this shaft works as an ideal tension component. This item is sold in a package of four. Each part is 39 mm in length and is accompanied by a washer.

This neoprene timing belt is perfect for hobby 3D printers, camera sliders, or other linear motion systems. It is open-ended so that each end can be attached to the printer head, camera slider, etc. 
 
Makeblock has 5 different length open-end timing belt for choose. Moreover, Makeblock Timing Pulley are additionally recommended.  

• Timing Belt Standard: MXL
• Pitch: 2.032mm 
• Width: 6.6 mm
• Material: Neoprene
• Tooth Number: 123

• Timing Belt Standard: MXL
• Pitch: 2.032mm 
• Width: 6.6 mm
• Material: Neoprene
• Tooth Number: 140

• Timing Belt Standard: MXL
• Pitch: 2.032mm 
• Width: 6.6 mm
• Material: Neoprene
• Tooth Number: 216

This neoprene timing belt is perfect for hobby 3D printers, camera sliders, or other linear motion systems. It is open-ended so that each end can be attached to the printer head, camera slider, etc. 
 
Makeblock has 5 different length open-end timing belt for choose. Moreover, Makeblock Timing Pulley are additionally recommended.  

This neoprene timing belt is perfect for hobby 3D printers, camera sliders, or other linear motion systems. It is open-ended so that each end can be attached to the printer head, camera slider, etc. 
 
Makeblock has 5 different length open-end timing belt for choose. Moreover, Makeblock Timing Pulley are additionally recommended.

• Made from 6061 aluminum, anodized surface.
• 18 tooth timing pulley with a center diameter of 4mm.
• Compatible with MXL Timing Belt.
• 2 Headless Screw M3x5 included.
• Sold in Pair.

• Made from 6061 aluminum extrusion , 8mm thick, anodized surface.
• Compatible with MXL Timing Belt.
• Sold in Packs of 4.

• Made from 6061 aluminum extrusion , 8mm thick, anodized surface.
• Compatible with MXL Timing Belt.
• Can also be used as a car wheel. 
• Sold in Packs of 4.

The Makeblock Timing Pulley Slice 62T-B can prevent the slipping of the timing belt when working.

Timing Pulley Slice 90T-B is the new version of Timing Pulley Slice 90T-Blue. As the "dam-board" of Timing Pulley 90T, Timing Pulley Slice 90T-B can prevent the sliping of the Timing Belt when working .

The Makeblock U Bracket B is usually used as the structural support or connection point for shafts, timing pulley 18T, timing pulley 62T, timing pulley 90T and so on. It has seven 8mm center holes that can be attached with 8mm shaft or bearings.

This Cross-Coupling Universal Joint is made by two fork-type connectors and a cross shaft. The structure is simple but the power transmission is large. The angle of deflection is up to max 45°.

USB 2.0 A-Male to Micro B-Male Cable is a new, smaller connector for USB devices. It has been compatible with more and more open source hardware, such as Arduino Leonardo, Raspberry Pi and Beagle Bone, and it's also compatible with Makeblock Baseboard.

Makeblock vacuum suction cup connector holder is a connector of air tube and vacuum suction cup. It is a great spare fittings, which is widely used in industry device and for DIY projects.

Makeblock Versatile Cable with Stripped Ends (50cm, 16AWG) is generally used as a connecting wire in motor and pump products which require heavy current in Makeblock platform.

The Makeblock Versatile Cable with Stripped Ends can be used for Makeblock Air Pump Motor Water Pump Motor and in a variety of DIY projects.

Makeblock versatile slider with copper sleeve is frequently used in  linear motion connect or support the shaft or lead screw of 3D printer. 

12 M4 holes on the body are compatible with all Makeblock motion and structure components.

Makeblock Worm Geared Motor Bracket A (PMMA) is a bracket specially designed for 370 Worm Geared Motor. This bracket enables you fix the 370 Worm Geared Motor on other Makeblock components to create more interesting projects.

φ10 Cylinder Bracket L1 is suitable for cylinders with a bore size of 10mm (such as Makeblock Double Acting Mini Cylinder MI10X60CA). As a L-shaped bracket, it can be installed on the head, the bottom, or both sides of a cylinder. The long-hole design ensures the bracket to be compatible with Beam0824 and Beam 2424, hence realizes the function of fixing the cylinder.


 

φ16 Cylinder Bracket L1 is suitable for cylinders with a bore size of 10mm (such as Makeblock Double Acting Mini Cylinder MI16X100CA). As a L-shaped bracket, it can be installed on the head, the bottom, or both sides of a cylinder. The long-hole design ensures the bracket to be compatible with Beam0824 and Beam 2424, hence realizes the function of fixing the cylinder.
 

This kit includes various screws, fasteners, and assembling tools, which are used to fix and connect individual parts together.

mBot Add-on Pack Interactive Light & Sound is a 3-in-1 pack based on mBot. You can construct "lighting chasing robot", "Scorpion robot" and "Intelligent voice-activated desk light " with mBot and the components in this Pack Each one has infinite possibility. To experience the magic of mBot in the changing light and sound.

Makeblock mBot Ranger Robot Kit is a three-in-one STEM educational robot, perfect for discovering the world of programming. This robot kit includes ready-to-use projects with the built-in Makeblock HD app for instant fun and play, right out of the box. Use the graphical programming, mBlock, to help kids learn all about entry-level coding. Developed with a three-in-one design, the mBot Ranger can be constructed in three different robot forms. Choose from the robot tank, self-balance car and the 3-wheeled car models. Need a little help? Like most Makeblock kits, the Ranger kit provides access to numerous online guides for additional help and development.

mBot is an all-in-one solution to enjoy the hands-on experience of programming, electronics, and robotics. Working with mBlock inspired by Scratch 2.0, connecting with computers or smart devices via Bluetooth or 2.4G (by different version), this easy-to-assemble mBot provides infinite possibilities for you to learn STEM (Science, Technology, Engineering, Mathematics).

his module is the updated version of the previous Me 130 motor. It has the same dimension as before but now is added a RJ25 port and motor drive chip. The module does not require motor driver port as it can rotate with dual-digital port. It supports Arduino but not the mBlock of mBot.

Me Line Follower Array is specially designed for professional users who need to make line-following robots, such as makers. It has 6 pair infrared probes on which the high-precision comparators will compare the detected colors. Compared to Me Line Follower, it has higher precision. When black line on the white background is detected by the comparators, the LED light will turn on and the robot will move along the black line. On the contrary, when the white line on the black background is detected, robot will follow the white line. You can also adjust the detecting sensibility with the potentiometer beside the probes, so that the probes will be adapted to different surroundings and detecting heights. This module utilizes unibus to transmit data. The MCU inside is used to send data to the main control.

This module is designed to drive stepper motors. It uses DRV8825 chip and has a maximum driving current of 2.5A. The DRV8825 is a complete micro-stepping motor driver with built-in translator for easy operation. It is designed to operate bipolar stepper motors in full, 1/2, 1/4, 1/8/ 1/16, or 1/32 step modes. We add an on-board potentiometer, so you can change the current of motor easily.

Plastic Gear 56T is a kind of gear drives. It can mesh with other gears to drive various parts. The gear has two bosses for positioning Makeblock parts. Gears also can be overlaid with each other through the bosses in order to make parts connected more stably.

Plastic Gear 72T is a kind of gear drives. It can be matched with other gears to drive various parts. The gear has two bosses for positioning Makeblock parts. Gears also can be overlaid with each other through the bosses in order to make parts connected more stably.

Plastic Gear 8T is a kind of gear drives. It usually works with motor shaft as a drive mechanism. There is interference fit between Plastic Gear 8T and motor shaft, therefore the gear should be pressed into the motor shaft with effort while assembling, and has to be disassembled by nut wrench according to the building samples. If the gear has to bear great load and be connected with motor shaft tightly, you need to use glue such as 502 glue.

This shaft clamping hubs is designed to use together with the 36mm encoder DC motor. Driven by the encoder motors, this hub sends the power to the executive device (e.g. wheel). It comes with one 4mm threaded hole and two 4mm holes, allowing you to connect with encoder motors easily.

Slider Plate can be connected with Slider Beam2424 -752 to build a high-precision linear motion structure (see demo). It comes with various screws and mounting holes, allowing you to connect on other structures easily.

Threaded Shaft is the connection part between linkages and Angular sensor. You can measure the angle of linkages together with the threaded shaft and Angular sensor. The threaded shaft is unable to turn as connected to the linkage, so you just need to fix the threaded shaft on the linkage with a nut. The angle of the shaft is adjustable by 90 degrees a time, so you can adjust the initial angle of the angular sensor.

Makeblock timing belt 128MXL - 160T can used to connect the timing pulley to drive motion.

Features:

• Timing Belt Standard: MXL
• Pitch: 2.032mm
• Width: 6.6 mm
• Material: Neoprene
• Tooth Number: 160
   

Makeblock Linear Motion Block Bracket A serves as a necessary component in a linear motion guide robot. This bracket includes seamless connectivity and flexibility, which is suitable for use in multiple linear motion projects.