This Studica Robotics rotary sensor offers a versatile comprehensive solution for measuring both relative and absolute positions, thanks to its ABI quadrature output and absolute position pulse output capabilities.  The encoder is thoughtfully designed with a standard 3/8-inch Hex Through Bore, complete with strategically placed mounting holes to seamlessly integrate into various multi-channel systems. 

The Studica Robotics #25 Chain with Master Links set, works with any of the Studica sprockets and other #25 sprockets. It includes 4 master links for creating various lengths of the chain.

The Studica Robotics 1:1 motor kit can be used with the Studica Maverick or any FTC legal motor such as the Neverest Classic (6600 RPM) or the REV HD Hex motor (6000RPM). 

The Studica Robotics 1:1 motor kit can be used with the Studica Maverick or any FTC legal motor such as the Neverest Classic (6600 RPM) or the REV HD Hex motor (6000 RPM). The kit includes a faceplate which supports the Studica Robotics building platform. The shaft is press-fit onto the motor's shaft. It is recommended that the shaft be supported by a bearing (part # 76302 for the Studica building system).

A 128 tooth gear for robotics design, made from 6061-T6 aluminum, with a 6.35mm thickness and a 14mm hole diameter.

A Studica Robotics 13-tooth bevel gear (2 pack) for use in robotics design builds.

A Studica Robotics 26-tooth bevel gear for use in robotics design and competitions.

The Studica Robotics 30-tooth bevel gear, 1-1 set (2 pack) is ideal for robotics design builds.

The Studica Robotics 32-tooth gear (2-pack) is ideal for use with robotics design builds.

The Studica Robotics 5mm 10-tooth pulleys are .40” inside the flanges to allow for belts up to 3/8” in width. Includes two set screws using a 1.5mm hex key.

The Studica Robotics 5mm Hex Shaft Hub allows users that have existing Omni Wheels (Part# 76260) or Mecanum Wheels (Part# 76243) to use REV Robotics 5mm Hex Shafts and Hex Motors.

A Studica Robotics 64-tooth gear (2 pack), for use with robotics design builds.

The Studica Robotics 6mm Shaft hub (4 pack) is used to connect any Studica wheel and/or motor with a 6mm shaft.

The Studica Robotics Bronze Bushing 6mm ID x 14mm OD fits any of channel or flat bracket having the common center hole pattern of 14mm. The inside diameter will fit any of the D-Shaft axles.

The Studica Robotics bronze bushing 12-pack is ideal for robotics design builds.

The Studica Robotics D-Shaft Collar is 6mm ID and 12mm OD. The inside diameter will fit any of the D-Shaft axles.