Close
Main Categories
    Filters
    Preferences
    Search

    myProtoBoard for NI myDAQ (requires the NI myDAQ, sold separately)

    The myProtoBoard NI myDAQ accessory board was designed to connect directly to the NI myDAQ hardware. The Protoboard consists of a prototyping space as well as each I/O line from NI myDAQ broken out through quad contact blocks to make wiring easier. The board includes a 9 V battery holder so students can access a supplemental voltage and current source for their projects. In addition, a breadboard is attached for solderless prototyping.
    MFR Part #: PCB1
    $44.99
    Availability: 94 in stock

     

    The myProtoBoard Kit includes:

    • myProtoBoard with NI myDAQ terminal block and female headers (Dimensions: 6.5 x 2.14”)
    • 9 V battery holder to add supplemental voltage and current
    Write your own review
    • Product can be reviewed only after purchasing it
    • Only registered users can write reviews
    • Bad
    • Excellent

     

    The myProtoBoard Kit includes:

    • myProtoBoard with NI myDAQ terminal block and female headers (Dimensions: 6.5 x 2.14”)
    • 9 V battery holder to add supplemental voltage and current
    Customers who bought this item also bought

    myDAQ with NI LabVIEW and Multisim - (For Students Only)

    #781327-01
    $249.97
    (In stock)
    National Instrument's NI myDAQ - Student with NI LabVIEW, and Multisim, is designed to give students the ability to work on engineering course work and experiment with projects hands-on anywhere, anytime. The NI myDAQ is a high-quality instrumentation device that gives students the power to prototype systems and test circuits outside of the classroom while improving comprehension with continuous reinforcement.  (Only for sale to students in the USA).
     
    (Special offer - optional myDAQ accessory myGRID for NI myDAQ - an AC power grid that will help you to investigate the components of a power grid, availble as a bundled purchase only, while supplies last).

    UND Student NI Bundle - EE201L Electric Lab Partial Kit

    #UND-EE201L
    $199.00

    Does not include myDAQ or Protoboard.

    The EE201L Electric Lab Partial Kit bundle for University of North Dakota students includes:

    • 1 - 350 pc. Pre-formed Jumper Wire Kit
    • 3 - 1k Resistors
    • 6 - 510Ω Resistors
    • 2 - 1MΩ Resistors
    • 3 - Diode Ultra Fast Recovery Rectifier 100 Volt 0.3A 2-Pin DO (1N4148)
    • 2 - Transistor General Purpose BJT NPN 40 Volt 0.2 Amp 3-Pin TO-92 (2N3904-R)
    • 4 - LED Uni-Color Orange Red 620nm 2-Pin (BVU-5M1QN1)
    • 2 - QUAD 2-INPUT POSITIVE NAND GATE DIP-14 (74LS00)
    • 3 - QUAD 2-INPUT POSITIVE NOR GATE DIP-14 (74LS02)
    • 2 - HEX INVERTER DIP-14 (74LS04)
    • 3 - QUAD 2-INPUT POSITIVE AND GATE DIP-14 (74LS08)
    • 3 - Triple 3 Input Positive NAND Gate DIP 14 (74LS10)
    • 2 - Triple 3 Input Positive AND Gate DIP 14 (74LS11)
    • 3 - DUAL 4-INPUT NAND GATE DIP-14 (74LS20)
    • 3 - Triple 3 Input NOR Gate DIP 14 (74LS27)
    • 3 - QUAD 2-INPUT POSITIVE OR GATE DIP-14 (74LS32)
    • 3 - DUAL D-TYPE FLIP-FLOP DIP-14 (74LS74)
    • 3 - 4-BIT BINARY FULL ADDER DIP-16 (74LS83)
    • 2 - QUAD 2-INPUT EXCLUSIVE OR GATE DIP-14 (74LS86)
    • 2 - Asynchronous Decade Counter DIP-14 (74LS90)
    • 2 - 3-TO-8 DECODER/DEMULTIPLEXER DIP-16 (74LS138)
    • 2 - DUAL 2-TO-4 DECODER/DEMULTIPLEXER DIP-16 (74LS139)
    • 2 - 1-TO-8 DATA SELECTOR/MULTIPLEXER DIP-16 (74LS151)
    • 2 - DUAL 4-TO-1 DATA SELECTOR/MULTIPLEXER DIP-16 (74LS153)
    • 2 - QUAD 2-TO-1 LINE DATA SELECTOR DIP-16 (74LS157)
    • 2 - Synchronous 4 Bit Binary Counter DIP-16 (74LS163)
    • 3 - 470 Ohm 1/2 Watt 5% (661423)
    • 3 - 220 Ohm 1/2 Watt 5% (661343)
    • 3 - LED Display 7-Segment Red 0.30 Inch Common Anode LHDP/RHDP 2.5mcd (24740)
    • 3 - SN74LS47N - 7447 IC (296-3712-5-ND?)
    • 1 - 2390 Tie Point Breadboard with Jumper Wire Kit
    • 4 - LED Red/Orange 5MM
    • 1 - Alligator Clips

    myDAQ - Hardware only - For Students

    #781325-01
    $219.94
    (In stock)

    myDAQ - National Instrument's NI myDAQ is designed to give students the ability to work on engineering course work and experiment with projects hands-on anywhere, anytime. The NI myDAQ is a high-quality instrumentation device that gives students the power to prototype systems and test circuits outside of the classroom while improving comprehension with continuous reinforcement.  (Only for sale to students in the USA).

     

    (Special offer - optional myDAQ accessory myGRID for NI myDAQ - an AC power grid that will help you to investigate the components of a power grid, availble as a bundled purchase only, while supplies last).

    Breadboard and Jumper Wire Kit

    #9880WK
    $10.95
    (31 In stock)
    This NI Breadboard is a 830 tie point breadboard that comes with a 70 piece jumper wire set designed for use with National Instruments myDAQ portable data acquisition device.

    Solder Practice Kit with Iron & Cutters

    #AK-100
    $17.24
    (40 In stock)

    This kit is a must for the beginner. After practicing your soldering techniques on the special area of the board; you will be ready to assemble this European siren with flashing LED's. This kit also includes a soldering iron and wire cutters. This kit requires soldering.