Main Categories
    Filters
    Preferences
    Search

    Robotics Sensor & Motor Training Kit

    Learn How to Control Motors, Sensors & Actuators with LabVIEW & NI myRIO.

     

    The Robotics Sensor & Motor Training Kit from Studica Robotics is an affordable turnkey solution that allows you to teach your students how to control sensors and motors using LabVIEW and NI myRIO. It includes two project boards, one with different motors and the other board with most of the standard robotics sensors.

     

    (NI myRIO, LabView and computer are not included).

    MFR Part #: 72030
    $499.00
    Availability: 43 in stock

    The Studica Robotics Sensor & Motor Training Kit provides a comprehensive solution for the introduction of sensors, actuators and motor control using the NI myRIO and LabVIEW. The bundle includes a sensor training board, a motor training board, power adapter, connection cables and courseware. Each board includes the essential hardware needed to complete the courseware.

    • Requires myRIO-1900 with LabVIEW Full Development System, LabVIEW Realtime Module, LabVIEW myRIO Toolkit, and LabVIEW FPGA Module. This is included with Robotics Sensor & Motor Training Kit by Studica with NI myRIO (part number 72030M).
    • The NI myRIO University version does not include LabVIEW Realtime Module or MyRIO Toolkit. However, the LabVIEW Realtime Module or MyRIO Toolkit is available to universities with current Academic Site License.

    This training bundle meets a variety of needs of students at all levels and is suitable as an introduction to sensor and motor control using LabVIEW.

    Learning Objectives:

    • Students learn the concepts and characteristics of common sensors, actuators, and electrical components.
    • Students use LabVIEW software to observe the functionality of sensors, actuators, and other electrical components.

    Sensor Training Board Features:

    • 5V Relay 
    • SMD LED Module
    • Capacitive Touch Sensor
    • Toggle Switch
    • Two-way Rocker with Button Function
    • Photoresistor
    • Thermistor
    • Infrared Ranging Sensor
    • Ultrasonic Distance Sensor 
    • Three-color LED
    • Passive Buzzer
    • MAX3232 and MAX3485 Serial Chips
    • IMU: 3-axis gyro, 3-axis accelerometer, 3-axis magnetometer
    • TSL2561 Digital Light Intensity Sensor
    • 7 Segment LED display
    • DHT11 Temperature and Humidity Sensor
    • Memory chip W25Q16
    • EC11 Rotary Switch

    Motor Training Board Features:

    • Stepper Motor Drive Circuit;
    • NEMA 17 42 Hybrid Stepper Motor;
    • DC motor drive circuit;
    • DC speed reduction motor with orthogonal encoder;
    • PWM Controlled Analog Servo Motor;
    • Solenoid valve Electromagnet Drive circuit;
    • 7 Segment LED Display Digital Tube

    Sensor Board Exercises:

    The Sensor Training Board guide includes the following exercises:

    1. Application of common digital I/O port:
      1. LED control experiment
      2. Relay control experiment
      3. TTP23 touch switch experiment
      4. Toggle switch
      5. Rocker button experiment
         
    2. The application of AD port:
      1. Photosensitive resistance experiment
      2. Thermistor experiment
      3. 2D rocker experiment
      4. Infrared distance sensor experiment
         
    3. The use of PWM port:
      1. Three-color LED experiment
      2. Passive buzzer experiment
         
    4. The use of serial port:
      1. RS232 serial communication experiment
      2. RS485 serial communication experiment
         
    5. The use of I2C bus:
      1. 9-axis gyroscope using experiments
      2. Digital light intensity sensor experiments
      3. Display control button recognition experiment
         
    6. The use of a single bus:
      1. DHT11 temperature
      2. Humidity sensor experiment
         
    7. Clock use:
      1. Ultrasonic sensor experiment
         
    8. SPI bus use:
      1. memory chip W25Q16 experiment
         
    9. Orthogonal coding use:
      1. EC11 rotary encoder using experiments

    Motor Board Exercises:

    The Motor Training Board guide includes the following exercises:

    1. Stepper motor motion control:
      1. Stepping motor forward and reverse experiment
      2. Stepping motor rotation speed control experiment
      3. Stepping motor rotation angle control experiment
      4. Stepping motor acceleration and deceleration control experiment
         
    2. Steering gear motion control:
      1. Steering gear angle control experiment
         
    3. DC motor motion control:
      1. DC motor forward and reverse experiment
      2. DC motor speed open loop control experiment
      3. DC motor speed detection experiment,
      4. DC motor speed closed loop control experiment,
      5. DC motor position closed loop control experiment
         
    4. Solenoid valve electromagnet control:
      1. Solenoid valve electromagnet on-off I/O control experiment
        ?
    5. Digital tube display control:
      1. 7 Segment LED Display experiment

     

    Write your own review
    • Product can be reviewed only after purchasing it
    • Only registered users can write reviews
    *
    *
    • Bad
    • Excellent

    The Studica Robotics Sensor & Motor Training Kit provides a comprehensive solution for the introduction of sensors, actuators and motor control using the NI myRIO and LabVIEW. The bundle includes a sensor training board, a motor training board, power adapter, connection cables and courseware. Each board includes the essential hardware needed to complete the courseware.

    • Requires myRIO-1900 with LabVIEW Full Development System, LabVIEW Realtime Module, LabVIEW myRIO Toolkit, and LabVIEW FPGA Module. This is included with Robotics Sensor & Motor Training Kit by Studica with NI myRIO (part number 72030M).
    • The NI myRIO University version does not include LabVIEW Realtime Module or MyRIO Toolkit. However, the LabVIEW Realtime Module or MyRIO Toolkit is available to universities with current Academic Site License.

    This training bundle meets a variety of needs of students at all levels and is suitable as an introduction to sensor and motor control using LabVIEW.

    Learning Objectives:

    • Students learn the concepts and characteristics of common sensors, actuators, and electrical components.
    • Students use LabVIEW software to observe the functionality of sensors, actuators, and other electrical components.

    Sensor Training Board Features:

    • 5V Relay 
    • SMD LED Module
    • Capacitive Touch Sensor
    • Toggle Switch
    • Two-way Rocker with Button Function
    • Photoresistor
    • Thermistor
    • Infrared Ranging Sensor
    • Ultrasonic Distance Sensor 
    • Three-color LED
    • Passive Buzzer
    • MAX3232 and MAX3485 Serial Chips
    • IMU: 3-axis gyro, 3-axis accelerometer, 3-axis magnetometer
    • TSL2561 Digital Light Intensity Sensor
    • 7 Segment LED display
    • DHT11 Temperature and Humidity Sensor
    • Memory chip W25Q16
    • EC11 Rotary Switch

    Motor Training Board Features:

    • Stepper Motor Drive Circuit;
    • NEMA 17 42 Hybrid Stepper Motor;
    • DC motor drive circuit;
    • DC speed reduction motor with orthogonal encoder;
    • PWM Controlled Analog Servo Motor;
    • Solenoid valve Electromagnet Drive circuit;
    • 7 Segment LED Display Digital Tube

    Sensor Board Exercises:

    The Sensor Training Board guide includes the following exercises:

    1. Application of common digital I/O port:
      1. LED control experiment
      2. Relay control experiment
      3. TTP23 touch switch experiment
      4. Toggle switch
      5. Rocker button experiment
         
    2. The application of AD port:
      1. Photosensitive resistance experiment
      2. Thermistor experiment
      3. 2D rocker experiment
      4. Infrared distance sensor experiment
         
    3. The use of PWM port:
      1. Three-color LED experiment
      2. Passive buzzer experiment
         
    4. The use of serial port:
      1. RS232 serial communication experiment
      2. RS485 serial communication experiment
         
    5. The use of I2C bus:
      1. 9-axis gyroscope using experiments
      2. Digital light intensity sensor experiments
      3. Display control button recognition experiment
         
    6. The use of a single bus:
      1. DHT11 temperature
      2. Humidity sensor experiment
         
    7. Clock use:
      1. Ultrasonic sensor experiment
         
    8. SPI bus use:
      1. memory chip W25Q16 experiment
         
    9. Orthogonal coding use:
      1. EC11 rotary encoder using experiments

    Motor Board Exercises:

    The Motor Training Board guide includes the following exercises:

    1. Stepper motor motion control:
      1. Stepping motor forward and reverse experiment
      2. Stepping motor rotation speed control experiment
      3. Stepping motor rotation angle control experiment
      4. Stepping motor acceleration and deceleration control experiment
         
    2. Steering gear motion control:
      1. Steering gear angle control experiment
         
    3. DC motor motion control:
      1. DC motor forward and reverse experiment
      2. DC motor speed open loop control experiment
      3. DC motor speed detection experiment,
      4. DC motor speed closed loop control experiment,
      5. DC motor position closed loop control experiment
         
    4. Solenoid valve electromagnet control:
      1. Solenoid valve electromagnet on-off I/O control experiment
        ?
    5. Digital tube display control:
      1. 7 Segment LED Display experiment

     

    Customers who bought this item also bought

    Classroom Robotics Kit

    #70405
    $1599.00
    ( 0 In stock)

    The Classroom Robotics Kit from Studica Robotics includes many parts for building a robot for the classroom and competitions. This kit is ideal for schools wanting to replicate an FTC-style robot kit and includes structure, controller, and electronics.

    Special volume discount pricing is available for U.S. schools.  Contact us at [email protected] for more information.

    Download the components list for this kit here.

     

     

     

    VMX FRC Training Bot

    #74000
    $1299.00

    The Studica VMX FRC Training Bot (FRC Trainer) is a smaller, sturdy, lightweight, and less expensive robot than your typical FRC robot. If you have a large FRC team, often only a handful of students get to learn how to create and program your team’s costly competition robot.  The FRC Trainer solves this problem and is ideal for groups of two to three to participate in hands-on learning in a classroom environment.  Schools can equip their labs with multiple FRC Trainers, benefiting from the great value and compact size. Students can even take it home with them! 

     

    This affordable solution is intended for:

    • FRC teams that want to learn and train on a smaller and more affordable robot,
    • Schools looking for a way to teach FRC robotics in the classroom.
    • Schools that want to teach coding in the classroom through robotics.

    The FRC-compatible Trainer is an intelligent and autonomous robot that uses the VMX Robotics Controller which can be programmed in C++ and Java.  VMX’s multitude of modern digital communications interfaces and Linux-based operating system allow users to directly access most modern devices (e.g., Intel RealSense tracking and depth cameras and LIDAR).


    VMX-Pi Key Use Cases and Hardware/Software Features and Benefits
    VMI-Pi Key Use Case Document is available here

     

    Download BOM here


    Studica accepts Purchase Orders from Schools and established companies, offering net 30 terms upon review and approval. Contact us at [email protected] for more information.

    Training Factory Industry 4.0 | 24V

    #554868
    $9448.95
    (In stock)

    The Training Factory Industry 4.0 – 24V from fischertechnik is an extremely flexible, modular, reasonably priced, and highly robust training and simulation model for use with most popular industrial PLCs. Explore Industry 4.0 and more with this powerful 24V simulation model that includes a variety of factory modules. Details below.

    FTC Drive Base Kit - v2

    #70400-v2
    $465.00
    ( 6 In stock)

    The FTC Drive Base Kit - v2 provides all the materials you need to create a Mecanum chassis. It includes our innovative slim mecanum wheels with bearings on all rollers that provide better acceleration due to their lighter weight. 4 NeveRest Orbital 20 Gearmotors with encoder cables, the new Clamping Shaft Hubs, 4 bumpers and complete hardware are included.

     

    FTC Teams are eligible to purchase one kit at a heavily discounted price.  To apply for the discount please click the link below.

     

    FTC Team Special Price - $375

    3D Depth Camera

    #71044
    $189.00
    ( 21 In stock)

    The 3D Depth Camera from Studica Robotics is an affordable replacement for the RealSense D435, it is designed to provide an accurate high-definition depth-sensing camera for mobile robotics and consumer electronic projects.

    WorldSkills Lyon 2024 Mobile Robotics Collection

    #70205
    Request Quote

    The WorldSkills Lyon 2024 Mobile Robotics Collection, by Studica, is the authorized collection for the WorldSkills Mobile Robotics Competition in Lyon, France, 10-15 September 2024. This collection includes most of the items in the previous competition collection and has 28 new parts. The biggest change is the new 3D Depth Camera, the 360 Degree LiDAR which will bring the competition to the next level for Autonomous Mobile Robotics (AMR).

    WorldSkills Mobile Robotics Junior Collection

    #70302
    Request Quote
    (In stock)

    The WorldSkills Mobile Robotics Junior Collection by Studica Robotics is the authorized robotics collection kit for the WorldSkills Mobile Robotics Junior Competition. This comprehensive Collection includes over 1,400 items including robot controllers, electronics, motors, mechanical structures, robot motors and gears, various belts, pulleys, sprockets, axles, slides, rack & pinion assemblies, robot wheels, bushings, bearings, couplings, collars, spacers, screws, nuts, and standoffs. 

     

    Download brochure and BOM

    NI myRIO Embedded Student Design Device

    #782693-01
    $749.00
    ( 8 In stock)

    The National Instruments myRIO-1900 is a portable reconfigurable I/O (RIO) device that students can use to design control, robotics, and mechatronics systems.
     

    For motor control, use the MD2 Motor Driver

    VMX Robotics Controller

    #70176
    $399.00
    ( 7 In stock)

    The Studica Robotics VMX (part #70176) is a powerful robotics controller with technology for enabling a rich development environment.  The VMX is a Linux-based computing platform with software tools and features enabling access to cutting-edge sensors.