Main Categories
    Filters
    Preferences
    Search

    Basic Parts Kit

    This Basic Parts Kit provides you with hundreds of parts to aid you in your prototype needs. Perform experiments first hand and develop a greater understanding of key concepts.
    MFR Part #: CK-1000
    $92.34
    Availability: 13 in stock

    The Basic Parts Kit includes:

    Resistors (1/4W, 5%, 5 each)

    • 10Ω, 100Ω, 470Ω, 1kΩ, 2.2kΩ, 4.7kΩ, 8.2kΩ, 10kΩ, 18kΩ, 27kΩ, 47kΩ, 82kΩ, 100kΩ, 220kΩ, 330kΩ, 470kΩ, 1MΩ

     

    Resistors (Trim Pot):

    • 500Ω, 1kΩ, 5kΩ, 50kΩ, 100kΩ, 500kΩ, 1MΩ

     

    Capacitators (10%, 50V Disc, 2 each):

    • 2.2pF, 5pF, 10pF, 15pF, 22pF, 47pF, 100pF, 220pF, 470pF, 680pF

     

    Capacitators (10% 100V Mylar, 2 each):

    • 0.001µF, 0.0047µF, 0.01µF, 0.047µF, 0.1µF, 0.33µF

     

    Capacitators (50V Lytic Radial, 2 each):

    • 1µF, 4.7µF, 10µF, 100µF, 470µF, 1000µF (35V)

     

    Semiconductors:

    • Bridge rectifier 1.5A
    • Diodes:
      • 1N34A, 1N4148, 1N4001, 1N4728, 1N4739, 1N4743, 1N4747
    • SCR: C106B1
    • Transistors:
      • 2N2222A, 2N2907, 2N3055, 2N3904, 2N3906, 2N5457
    • ICs:
      • LM386N-1, NE555, LM1741CP1, CD4013BE, 4017, LM7805CT, LM7812CV, 74LS00, 74LS02, 74LS08, 74LS10, 74LS74, 74LS86
    • Photo cell

     

    LEDs (4 each):

    • Red, Green, White, Yellow, 7-segment display

     

    Inductors:

    • Choke:
      • 10mH, 470µH, 1000µH/1mH, 4.7µH, 10µH, 47µH, 100µH, 33mH
    • 5V Relay

     

    Wire (22ga. solid, 5'):

    • Black, Red, Orange, Yellow, Green

     

    Miscellaneous:

    • Push button switch
    • SPDT slide switch
    • DPDT slide switch
    • 8-pole DIP switch
    • condencer microphone
    • 9V battery snap
    • 8Ω speaker
    • buzzer
    • black & red alligator clips
    Write your own review
    • Product can be reviewed only after purchasing it
    • Only registered users can write reviews
    *
    *
    • Bad
    • Excellent

    The Basic Parts Kit includes:

    Resistors (1/4W, 5%, 5 each)

    • 10Ω, 100Ω, 470Ω, 1kΩ, 2.2kΩ, 4.7kΩ, 8.2kΩ, 10kΩ, 18kΩ, 27kΩ, 47kΩ, 82kΩ, 100kΩ, 220kΩ, 330kΩ, 470kΩ, 1MΩ

     

    Resistors (Trim Pot):

    • 500Ω, 1kΩ, 5kΩ, 50kΩ, 100kΩ, 500kΩ, 1MΩ

     

    Capacitators (10%, 50V Disc, 2 each):

    • 2.2pF, 5pF, 10pF, 15pF, 22pF, 47pF, 100pF, 220pF, 470pF, 680pF

     

    Capacitators (10% 100V Mylar, 2 each):

    • 0.001µF, 0.0047µF, 0.01µF, 0.047µF, 0.1µF, 0.33µF

     

    Capacitators (50V Lytic Radial, 2 each):

    • 1µF, 4.7µF, 10µF, 100µF, 470µF, 1000µF (35V)

     

    Semiconductors:

    • Bridge rectifier 1.5A
    • Diodes:
      • 1N34A, 1N4148, 1N4001, 1N4728, 1N4739, 1N4743, 1N4747
    • SCR: C106B1
    • Transistors:
      • 2N2222A, 2N2907, 2N3055, 2N3904, 2N3906, 2N5457
    • ICs:
      • LM386N-1, NE555, LM1741CP1, CD4013BE, 4017, LM7805CT, LM7812CV, 74LS00, 74LS02, 74LS08, 74LS10, 74LS74, 74LS86
    • Photo cell

     

    LEDs (4 each):

    • Red, Green, White, Yellow, 7-segment display

     

    Inductors:

    • Choke:
      • 10mH, 470µH, 1000µH/1mH, 4.7µH, 10µH, 47µH, 100µH, 33mH
    • 5V Relay

     

    Wire (22ga. solid, 5'):

    • Black, Red, Orange, Yellow, Green

     

    Miscellaneous:

    • Push button switch
    • SPDT slide switch
    • DPDT slide switch
    • 8-pole DIP switch
    • condencer microphone
    • 9V battery snap
    • 8Ω speaker
    • buzzer
    • black & red alligator clips
    Customers who bought this item also bought

    myDAQ Student Bundle - LabVIEW & Multisim

    #781327-01
    $308.99
    (In stock)
    Get the NI myDAQ Data Acquisition Device included with LabVIEW and Multisim in this power-packed student bundle from National Instruments. Designed to give students the ability to work on engineering coursework and experiment with their projects hands-on anywhere, anytime. (Only for sale to students in the USA).

    Breadboard and Jumper Wire Kit

    #9880WK
    $10.95 $11.50
    ( 25 In stock)
    This NI Breadboard is a 830 tie point breadboard that comes with a 70 piece jumper wire set designed for use with National Instruments my-DAQ portable data acquisition device.

    myProto Protoboard

    #6002-410-007
    $49.99
    ( 2 In stock)

    The Digilent myProto accessory board for the NI my-DAQ and NI my-RIO brings all your my-DAQ/my-RIO's signals to breadboard connections where they can be easily accessed using simple jumper wires, and even adds several useful I/O devices.

      NI Multisim Circuit Design Suite - Student Edition

      #779897-35
      $65.95
      (In stock)

      NI Circuit Design Suite combines Multisim 14.3 and Ultiboard PCB Design Software, to offer students a complete set of tools for circuit design, simulation, validation, and PCB layout. The Circuit Design Suite software download helps you design electronic circuits to final printed circuit board protypes using intuitive and cost-effective tools.

       

      Note: (Only for sale to Students and Faculty in the USA for lab preparation on personal computers, not for classroom or institutional use.)

      myDevBoard - Prototype Board

      #70752
      $44.99
      ( 119 In stock)

      The myDevBoard is an accessory board designed to connect directly to the NI myDAQ hardware. The Protoboard consists of a prototyping space as well as each I/O line from NI myDAQ broken out through quad contact blocks to make wiring easier.

      Solder Practice Kit with Iron & Cutters

      #AK-100
      $17.24
      ( 14 In stock)

      This kit is a must for the beginner. After practicing your soldering techniques on the special area of the board; you will be ready to assemble this European siren with flashing LED's. This kit also includes a soldering iron and wire cutters. This kit requires soldering.

      myGrid for NI myDAQ

      #9mygrid
      $39.95
      ( 242 In stock)

      The myGrid for NI myDAQ is an AC power grid that will help a student investigate the components of a power grid. The myGrid interfaces with NI myDAQ to demonstrate energy monitoring, energy conservation, and the concept of the smart grid. The system includes a traditional power source through a motor representing fossil fuels and a renewable power source using a solar panel. It models how power is generated, transmitted, and distributed in a residential setting across three houses.

      NI myRIO Embedded Student Design Device

      #782693-01
      $749.00
      ( 8 In stock)

      The National Instruments myRIO-1900 is a portable reconfigurable I/O (RIO) device that students can use to design control, robotics, and mechatronics systems.
       

      For motor control, use the MD2 Motor Driver

      NI myRIO Embedded Systems Accessory Kit

      #783070-01
      $239.00
      ( 4 In stock)

      The NI myRIO Embedded Systems Accessory Kit contains common sensors, devices, and a display for your embedded systems projects as described in the NI myRIO Project Essentials Guide.

      Required for APUS courses: ELEN430, ELEN435, ELEN436, ELEN440, ELEN498, ELEN499

      (NI myRIO not included)