Numeric Pad for NXT allows you to send numeric input to your NXT program. It has a digital interface with inputs for numbers 0-9, and symbols (#) and (*). Easily attach the numeric pad to the sensor port on your NXT motor.
Vision Subsystem v4 for NXT or EV3 connects to NXT or EV3 on a standard sensor port, and tracks up to 8 colored objects or lines. It reports coordinates of each object to the host, and also connects to a PC through an open USB port.
Port Splitter for NXT Digital Sensors allows you to split a NXT port and connect up to three I2C compliant sensor to a single port. Supported in NXT-G, NXC, RobotC, leJOS, LabVIEW, and LVEE.
PF Motor Controller for NXT (PFMate) is designed to be a compact controller for PF Motors using IR communications through PF receivers. This device can attach to your PF IR receiver, and control PF motors with high reliability. You can control upto 4 receivers, by mounting it at a distance Using this controller you will be able to control speed, direction and braking/floating actions of PF motors connected to your IR receiver.
Please note, the red spacer bricks and the PF IR receiver seen in the picture are not part of this controller.
Light Sensor Array for NXT or EV3 is an array of 8 sensors with controlled light source. Watch as it returns 8 discrete values of the sensor readings. Your program can determine if you wish to follow line with it or do something else.
Hitec 422 Servo Mounting kit for NXT includes servo and horn mounting hardware for NXT and installation instructions. This kit is designed to mount following Hitec Servos on NXT (servos not included):
Additional parts required, please see specifications.
High Precision Medium Range Infrared distance sensor for NXT or EV3 detects obstacles between 10cm to 80cm. This sensor has built-in calibrations to provide high resolution readings.
Flexi-Cables for NXT 20cm x 3 are thin, flexible cables for use with NXT/EV3 controllers. This kit includes NXT/EV3 compatible phone jack connectors. Package of three cables, 20cm each.
Flexi-Cables for NXT 10cm x 3 are thin, flexible cables for use with NXT/EV3 controllers. This kit includes NXT/EV3 compatible phone jack connectors. Package of three cables, 10cm each.
Flexi-Cables for NXT (FLEX-Nx) are thin, flexible cables intended for use with the NXT or EV3. These cables come with NXT/EV3 compatible phone jack connectors. This pack also includes four of the most commonly used cable sizes.
Extender for NXT/EV3 Cables is a kit used to connect two cables to increase effective length. This kit includes PCB and NXT compatible connnectors with assembly instructions - some soldering required.
EVShield - Arduino Shield for EV3 Motors and Sensors includes an EVShield and a Arduino Uno compatible Board. The EVShield attaches directly to an Arduino Duemilanove or Uno and has headers to connect other shields on top. Connect up to 4 EV3 or NXT motors, and 4 NXT or EV3 sensors, and program them through Arduino sketch. You can also attach up to 6 RC servo motors to EVShield. This shield provides ports for 12C devices.
Digital Pneumatic Pressure Sensor for NXT or EV3 is a sensor that measures pressure produced by LEGO Pneumatics systems and more. The pressure range of this sensor is from 0 to 58 PSI. The sensor measures absolute pressure as well as relative pressure, simply set reference pressure and measure the change in pressure relative to that reference.
Continuous Rotation RC Servo (47 g) with mounting kit for EV3 and NXT is designed to integrate a medium duty continuous rotation RC servo motor with your NXT projects. This servo is ideal for medium force movement. The kit includes a HS 311 continuous rotation RC servo motor, mounting plate, horn plates to attach servo axis to your project, mounting hardware (screws, etc.) and instructions.
Please note this kit does not include blue pins as shown in the picture.
Console Adapter for EV3 allows you to access the operating system of your Linux console. This is the ideal adapter for hacking your system and developing it to your desired specifications.
Classroom pack of Flexi-Cables for NXT/EV3 (35 cm x 25) offers users ribbon-like cables that are both thin and flexible.
Classroom pack of Flexi-Cables for NXT/EV3 (20 cm x 25) offers users ribbon-like cables that are both thin and flexible.
Classroom pack of Flexi-Cables for NXT/EV3 (10 cm x 25) offers users ribbon-like cables that are both thin and flexible.
Breadboard Connector Kit for NXT or EV3 is designed to connect NXT or EV3 to a breadboard, soldering required. It contains a PCB, NXT/EV3 compatible connector and headers to attach. This kit also includes an assembly instructions guide.
Ball Caster to mount on NXT Robots is a ball caster that includes two balls, one plastic and one metal. You can use one of the balls based on your intended application. Ball diameter: 1/4"
This kit contains a medium duty 47 grams servo motor, mounting plates, horn plates and mounting hardware to integrate it with your NXT or EV3 contraptions. The kit comes with mounting instructions.
This kit is designed to integrate a medium duty RC servo motor with your NXT contraptions. It is ideal for medium force, high precision movements. The kit contains 47 grams RC Servo motor, Mounting plate to mount servo on your contraption, Horn plates to attach Servo axis to your contraptions, Mounting hardware (screws etc) and instructions. The kit does not include blue pins as shown in the picture. Servo motor specs: