The 75mm Drive Wheel can be used as a simple wheel providing good traction on carpet and tile flooring. They can also be used for intake systems. Use with 1/2" hex shaft of use6mm Shaft Hubto use connect6mm D-Shaft Axles.

Specifications:

• Diameter: 75mm
• Axial width: 12.5mm
• Hub: 1/2" Inner Hex
• Inner Material: Molded Plastic in Yellow
• Outer Material: TPU Polyurethane in Black
• Outer Material Durometer: 60A
• Weight: 0.05kg
• Step File

The 90 Degree Bracket is perfect for connecting two channels pieces at 90 angle from each other. Each side is 48mm wide to fit perfectly on the channel. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.

Specifications:

• Material - Anodized 6061-T6 Aluminum
• Thickness - 3mm
• Step File

Servocity - 90° Clamping Tube Hub provides a great way to attach a 5/8” diameter tube or shaft to a ½" diameter hub. These clamping hubs have a 5/8" diameter bore for shaft connection, a ½" diameter bore for hub connection, four 6-32 tapped holes, four 6-32 through holes, two 6-32 machine screw for tightening, and utilizes the 0.77" hub pattern.

Servocity - 90° Quad Hub Mount C attachesdirectly to a robotics channel in multiple positions and are useful as attachment points for shafts and tubes with a 0.5" diameter and other hub mountable items. The model C type offers a wider base than the model B. Each hub mount has a 0.5" bore, a width of 1.3", and utilizes the 0.77" hub pattern.

The Studica Adjustable Angle Flat Bracket is perfect for connecting two channels pieces together at various angles. It is 3mm thick and as with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.

Specifications:

• Material - Anodized 6061-T6 Aluminum
• Thickness - 3mm
• Width - 48mm
• Length - 96mm
• Step File

The Studica Flat Beam is 3mm thick and 8mm wide. As with the other Studica Roboticsbuilding components, it has the common hole pattern which makes it easyto connectto other structure with very little or no additional machining required. You can easily connectto other channel, extrusions,bushings, bearing, mounting brackets andmore so you can quickly assemble and disassemble robots and automated systems.

Specifications:

• Material:6061-T6 Aluminum
• Thickness - 3mm
• Width - 8mm
• Length - 96mm
• Step File

The Studica Square Beam is 8mm by 8mm. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.

Specifications:

• Material -  Anodized 6061-T6 Aluminum
• Holes - 3.5mm diameter spaced 8mm apart
• Length - 96mm
• Step File

Servocity - Aluminum Motor Mount B connects to the outside of robotics channels and works with both standard and precisions gear motors. This allows you to drive shafts through channels, or even tubing. The mount utilizes various hole patterns for your motor, and a 1.5" hole pattern for connecting to other robotics products.

Servocity - Ball Bearing Idler Shaft A includes a pre-installed bearing. It weighs 0.30 oz and measures 0.25" in diameter, 0.55" in height and 1.19" in length. This shaft is an ideal component for your robotic systems.

The Studica Robotics Bracket Pack includes various degree brackets, flat brackets, L brackets, U brackets a T and an X bracket, ideal for your robotics designs.

The Bronze Bushing 6mm ID x 14mm OD fits any of the channel and flat brackets having the commoncenter hole pattern of 14mm. The inside diameter will fit any of the D-Shaft axels.

Material:bronze
Inside Diameter:6 mm
Outside Diameter: 14mm

• Step File
  

• Step File