Close
Main Categories
    Filters
    Preferences
    Search

    Robotics

    View as Grid List
    Sort by
    Display per page

    90° Clamping Tube Hub

    #545368
    $7.20

    90° Clamping Tube Hub provides a great way to attach a 5/8” diameter tube or shaft to a ½" diameter hub. These clamping hubs have a 5/8" diameter bore for shaft connection, a ½" diameter bore for hub connection, four 6-32 tapped holes, four 6-32 through holes, two 6-32 machine screw for tightening, and utilizes the 0.77" hub pattern.

    90° Quad Hub Mount C

    #545360
    $4.79

    90° Quad Hub Mount C attaches directly to a robotics channel in multiple positions and are useful as attachment points for shafts and tubes with a 0.5" diameter and other hub mountable items. The model C type offers a wider base than the model B. Each hub mount has a 0.5" bore, a width of 1.3", and utilizes the 0.77" hub pattern.

    90rpm Micro Gearmotor

    #638106
    $8.00

    96mm Adjustable Flat Bracket (2 pack)

    #76083-2
    $5.49

    The Studica Adjustable Angle Flat Bracket is perfect for connecting two channels pieces together at various angles. It is 3mm thick and as with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.

    Specifications:

    • Material - Anodized 6061-T6 Aluminum
    • Thickness - 3mm
    • Width - 48mm
    • Length - 96mm
    • Step File

    96mm Flat Beam (2 pack)

    #76047-2
    $3.99

    The Studica Flat Beam is 3mm thick and 8mm wide. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.

    Specifications:

    • Material: 6061-T6 Aluminum
    • Thickness - 3mm
    • Width - 8mm
    • Length - 96mm
    • Step File

    96mm Square Beam

    #76107
    $3.99

    The Studica Square Beam is 8mm by 8mm. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.

    Specifications:

    • Material -  Anodized 6061-T6 Aluminum
    • Holes - 3.5mm diameter spaced 8mm apart
    • Length - 96mm
    • Step File

    Aluminum Motor Mount B

    #555128
    $3.99

    Aluminum Motor Mount B connects to the outside of robotics channels and works with both standard and precisions gear motors. This allows you to drive shafts through channels, or even tubing. The mount utilizes various hole patterns for your motor, and a 1.5" hole pattern for connecting to other robotics products.

    Aluminum Motor Mount D

    #555132
    $3.99

    Aluminum Motor Mount D connects to the inside of robotics channels and works with both standard and precisions gear motors. This allows you to drive shafts through channels. The mount utilizes various hole patterns for your motor, and a 1.5" hole pattern for connecting to other robotics products.

    Arduino Education Starter Kit

    #AKX00023
    Request a Quote

    Teach middle school students the basics of programming, coding, and electronics. No prior knowledge or experience is necessary as the kits guide you through step-by-step, you are well-supported with teacher guides, and lessons can be paced according to your students’ abilities. You can integrate the kit throughout the curriculum, giving your students the opportunity to become confident in programming and electronics with guided sessions and open experimentation. You’ll also be teaching them vital 21st-century skills such as collaboration and problem-solving.

    Arduino Engineering Kit

    #AKX00004
    Request a Quote

    Bring the power of the Arduino MKR1000 to the classroom with MATLAB and Simulink. The Arduino Engineering Kit is the ideal solution for university and advanced students, providing a state-of-the-art, hands-on incorporation of Arduino technology in an educational setting.

    The kit is primarily for three types of users: students learning about engineering, professors teaching engineering, and makers with an interest or background in engineering.

    The kit includes three cutting-edge Arduino-based projects that teach students fundamental engineering concepts, key aspects of mechatronics, and MATLAB and Simulink programming. These projects will challenge them intellectually and help them develop physical engineering skills — plus they’re just fun to do.

    The kit is sold in a hard plastic, stackable tool box for storage and years of reuse. Inside the box is an easy-to-use Arduino MKR1000 Board, several customized parts, and a complete set of electrical and mechanical components needed to assemble all three projects.

    In addition to the state-of-the-art, high-quality, open-source hardware provided, after registering online, each student will have access to a dedicated e-learning platform and other learning materials. Additionally, they are granted a one-year individual license for MATLAB and Simulink. This provides them with hands-on experience in system modeling and embedded algorithm development.

    The Arduino Engineering Kit is built on its own education learning management system with step-by-step instructions and lessons. The content of this kit is divided into six chapters, featuring a short introduction, a getting-started guide for the tools that will be used, a concepts section, and, finally, the projects themselves. Users will receive access to the online platform for one year and can purchase additional licenses to extend platform access.

     

    Includes,

    • Arduino MKR1000 Board
    • Arduino MKR Motor Shield
    • Arduino MKR IMU Shield
    • DC motor
    • 2 geared DC motors with encoder
    • Standard micro servo (180 degrees)
    • Hall sensor module
    • Ultrasonic sensor module
    • Webcam
    • LiPo battery
    • LiPo battery charger
    • Micro USB cable
    • Tinkerkit Module Cable (3-pin to 4-pin)
    • Tinkerkit Module Cable (3-pin)
    • 3 sets of assembly pieces
    • 2 wheels
    • Caster wheel
    • Timing belt
    • 2 timing pulleys
    • 2 DC motor mounting brackets
    • Metal shaft (90 mm)
    • 2 metal D shafts (50 mm)
    • 2 sets of distance spacers (6 mm, 17 mm)
    • 2 sets of M2 bolts (10 mm, 25 mm)
    • 3 sets of M3 bolts (10 mm, 15 mm, 25 mm)
    • Set of M2 nuts
    • Set of M3 nuts
    • Set of M3 lock nuts with nylon insert
    • 3 shaft collars
    • Propeller adapter screw
    • 2 magnets (Ø8 mm)
    • Thread (5 m)
    • 2 whiteboard pens
    • Sticker for vision recognition

    Articulated jaw for trailer coupling, red

    #38446
    $0.34
    38446: Articulated Jaw for Trailer Coupling

    Axle coupling, black

    #35073
    $0.17
    35073: Axle Coupling

    Ball Bearing Idler Shaft A

    #535194
    $3.46

    Ball Bearing Idler Shaft A includes a pre-installed bearing. It weighs 0.30 oz and measures 0.25" in diameter, 0.55" in height and 1.19" in length. This shaft is an ideal component for your robotic systems.

    Bracket Pack

    #70262
    $189.00

    Includes,

    • 3 - 120 Degree Bracket (2 pack)  76080-2
    • 2 - 90 Degree Bracket (2 pack)  76081-2
    • 2 - 135 Degree Bracket (2 pack)  76082-2
    • 2 - 96mm Adjustable Flat Bracket (2 pack)  76083-2
    • 1 - T Bracket (2 pack)  76084-2
    • 1 - X Bracket (2 pack)  76085-2
    • 4 - Inside U Bracket (2 pack)  76086-2
    • 4 - L Bracket (2 pack)  76087-2
    • 4 - Inside L Bracket (2 pack)  76089-2

    Bronze Bushing 6mm ID x 14mm OD (12 pack)

    #76301-12
    $22.99

    The Bronze Bushing 6mm ID x 14mm OD fits any of the channel and flat brackets having the common center hole pattern of 14mm. The inside diameter will fit any of the D-Shaft axels.

    Material:  bronze
    Inside Diameter: 6 mm
    Outside Diameter: 14 mm

    Clamping Swivel Motor Mounts - 22mm

    #555148
    $4.79

    Clamping Swivel Motor Mounts come in 3 sizes (22, 32 and 37mm ID). These motor mounts are extremely versatile and can easily attach to other robotics components. To adjust the height of the motor, simply loosen the pinch bolt found on the clamping swivel motor mount and slide the motor body to the desired position. These motor mounts are constructed of 6061 T-6 aluminum.

    COEX Clover Drone Kit

    #8902211
    $848.90

    Enjoy the limitless possibilities of a complete programmable drone kit that has everything you need for carrying out all kinds of scientific and technical projects. This model is a full kit with all units needed for the drone to start the mission.

    Coupling 30, red

    #38260
    $0.34
    38260: Coupling 30

    Coupling, red

    #38253
    $0.34
    38253: Coupling 2

    Electronic Motor Action Kit

    #MX-510M
    $11.61

    Build your own electric powered MOTOR KIT. Control mixing with rotating color disc. Easy to read operating manual. Requires two AA batteries. Ages 8 & Up.


    Electronics Mounting Plate for Workshop

    #71015
    $10.99

    End Piece Plate (2 pack)

    #76143-2
    $9.99

    The Studica End Piece Plate is commonly fastened to the inside end of the U Channel. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.

    Specifications:

    Fastener pack

    #70258
    $383.46

    Includes,

    • 2 - M3 x 8mm Socket Head Cap Screw (pack of 100)  76200-100
    • 2 - M3 x 10mm Socket Head Cap Screw (pack of 100)  76201-100
    • 2 - M3 x 12mm Socket Head Cap Screw (pack of 100)  76202-100
    • 2 - M3 x 10mm Button Head Cap Screw (pack of 50)  76203-50
    • 3 - M3 Kep Nut (pack of 100)  76204-100
    • 2 - M3 Nyloc Nut (pack of 100)  76205-100
    • 1 - M3 x 30mm Socket Head Cap Screw (pack of 50)  76206-50
    • 1 - M3 x 20mm Socket Head Cap Screw (pack of 50)  76209-50
    • 1 - 2.5mm Hex Ball End Screwdriver  70142
    • 1 - Combination Wrench 5.5mm  70145