On Sale

Starting From: $199.00

    Available for

  • Windows
  • Mac
See Price Options

NI myDAQ - Student with NI LabVIEW, Multisim, & Ultiboard

National Instrument's NI myDAQ - Student with NI LabVIEW, Multisim, & Ultiboard is designed to give students the ability to work on engineering course work and experiment with projects hands-on anywhere, anytime. The NI myDAQ is a high-quality instrumentation device that gives students the power to prototype systems and test circuits outside of the classroom while improving comprehension with continuous reinforcement.

View the NI myDAQ User guide and Specifications [Click Here]

What's included:

  • NI myDAQ device
  • Powered by LabVIEW
  • Integrated Installation DVD
    • NI ELVISmx & NI DAQmx
    •  LabVIEW
    • Multisim
  • USB Cable
  • DMM Probes
  • Audio cable (3.5mm)
  • Screw Terminal connector and NI screwdriver
  • Getting Started Card
  • TI Design Competition & Samples Program Card
  • Reusable Storage Tray

The myDAQ is a single device the has eight commonly used plug-and-play computer-based lab instruments. With NI myDAQ, the computer becomes an engineering instrument.

Designed by National Instruments with high-quality Texas Instruments Analog Integrated Circuits (ICs), the hardware system diagram and list of Texas Instruments IC's in the NI myDAQ user guide depicts how TI data converters, amplifiers, and interface and power management circuits were used in the design of NI myDAQ.

Extend the device's capabilities with LabVIEW and Multisim. Verify homework solutions with real signals using Multisim for circuit simulation and LabVIEW for automating measurements and performing signal processing.

Technical Support

Do more with NI myDAQ. Learn how to use NI myDAQ with three different software platforms, troubleshoot problems with your NI myDAQ, and ask your own questions on the discussion forums.


For High School Classroom Pricing - click here

Software is Windows only.

Two Differential Analog Input and Analog Output Channels (200 ks/s, 16 bit, +/- 10 Volts)
Access matched analog input and output channels in a +/- 10 volt range through the screw terminal connectors or +/- 2 volt range through the 3.5mm audio jacks.

+5 , +15, and -15 Volt Power Supply Outputs (up to 500m Watts of Power)
USB powered for maximum mobility, myDAQ supplies enough power for simple circuits and sensors.

Eight Digital Input and Digital Output Lines (3.3 Volt TTL-Compatible)
Use software-timed digital lines for interfacing both Low Voltage TTL (LVTTL) and 5 volt TTL digital circuits. Each line is individually selectable for input or output.

60 Volt Digital Multimeter (DMM) for Measuring Voltage, Current, and Resistance
The isolated DMM includes the capability to measure both AC and DC voltage and current as well as resistance, diode voltage, and continuity.

Reusable Storage Box with Storage Tray, DMM Probes, and Audio Cable
The box and storage tray provide convenient storage for your NI myDAQ and included USB cable, DMM probes, audio cable, as well as your own components and accessories.

Customer Reviews

  1. Fast delivery

    by on

    Had to order this with the Circuits textbook online because the school bookstore ran out of stock. The bundle came very quickly. Very satisfied with the materials and textbook, so far.

  2. myDAQ

    by on

    Require this for my mechatronics project. Excellent piece of kit. Downloaded software. Hooked up to the first part of project and was able to control the motor speed manually with a simple Labview program via the myDAQ. Very happy with it so far.

    Location: Tullamore, Ireland

  3. Very Happy

    by on

    Worked right out of the box with LabVIEW and Python using DAQmx drivers. I am happy with the accessories that came with it. I am looking forward to using it.

    Location: Toronto, Ontario

  4. myDAQ

    by on

    A neat and somewhat handy device to learn how much more discrete equipment would work in the lab and/or the workplace. Doesn't hurt that there are several useful simulated devices that emulate lower priced discrete equipment (yet still expensive) so one can get a good idea before touching the much more expensive professional device.

    Location: Campbell, CA

  5. Great product

    by on

    Easy purchase. As a first time user it would be great to add a little instruction on basic operations

    Location: Fiu

  6. MyDAQ Purchase

    by on

    Device was delivered on time. Order service was excellent.

    Location: Phoenix, Arizona

  7. RE: NI my DAQ

    by on

    Hello... I here to say that the item is nice, well thought out, and put together in a package that resembles a well-thought-out idea (engineering at its highest). I noticed the software a bit while thumbing through the packages it came with... There are some real, nice items that come packaged with this hardware. The software is top notch. I have skimmed through it and noticed that, although it can become complicated for a novice, it is drawn out programmatically with the viewer in mind. All together...good product and with nice attachments, too. I saw the items that can be attached with the NI myDAQ. Sincerely, Seth

    Location: Louisiana

  8. Very Pleased

    by on

    Excellent product. Haven't found anything that I can't test with it yet. Very pleased

    Location: Eupora, MS

  9. NI myDAQ Review

    by on

    I totally loved my purchase for the NI myDAQ and I hope to do business with you again in the future.

    Location: Hialeah, Florida

  10. Great Coursera Student offering

    by on

    I'm attending a Coursera Linear Circuits Online training. For the labs a NI myDAQ was required. Although I was a bit late in ordering the myDAQ, Studica had it sent to my home address within a week. Great support and what a great device. Endless possibilities and I love doing my Coursera lab assignments with it.

    Location: Netherlands

  11. NI myDAQ

    by on

    Device works as stated. Readings basically match my other testers. Oscilloscope is basic with few controls. Have not tested all instruments and apps. Instructions/help files leave something to be desired but with tenacity you can prevail. Loads a LOT of start up and run-time service files on computer. Will not operate without said files. I would like to have an explanation for what each file does. Not knowing what they do I will probably remove it from my desktop and install on a laptop. Good value for the beginner. The multimeter alone is worth the cost. With the above stated I would recommend it.

    Location: Troy, Virginia

  12. half a truckload of lab measurement equipment in the size of a DVM - a must-have for electronics work

    by on

    I bought the myDAQ because I needed one for the edX course electronic interfaces. What a great piece of gear. The software takes a while to install on a W8.1 laptop but it is very stable. The scope panel and measurements are easy to read. The tutorials were essential since the instrument has so many capabilities and interfaces. Every day I learn a bit more about this device and I am amazed at how well thought out the hardware and software is. PC based scopes have been available for a while but remained limited in capabilities. The myDAQ feels totally confident among scopes costing $1000 or more. Besides using the myDAQ for measurements on microcontrollers and opamps in the edX course, I am using this to check preamps, guitar amplifiers and pedals. I have also used the myDAQ to debug some electronic interfaces for the Raspberry Pi and the Intel Galileo. It is easy to pack the myDAQ in my backpack with my laptop when I am on the road. If there is a gripe, it is a small one. Why doesn't a meter of this caliber come with minigrabber probes with clips that attach to the probes? It makes hands-free testing so much easier.

    Location: New York, NY

  13. myDAQ is better than my scientific calculator

    by on

    The NI myDAQ is an amazing device. I use it as an instrument monitoring device but I have also used it as a scientific calculator. This little thing has thousands of applications!

    I am a student
    I am using this product for My engineering studies.
    Location: Michigan

Circuits, Third Edition Textbook

$121.00   $119.00

NI LabVIEW Student Edition

$1,249.00   $19.99

NI Multisim Student Edition

$2,795.00   $39.95

NI myDAQ - Student with 30 Day Software Evaluation


Basic Parts Kit for NI myDAQ

$83.25   $59.95

myProtoBoard for NI myDAQ

$49.95   $44.99

Breadboard and Jumper Wire Kit for NI myDAQ


Carrying Case for Accessories for NI myDAQ

$39.95   $34.95

NI LabVIEW Student Edition

$1,249.00   $19.99

NI Multisim Student Edition

$2,795.00   $39.95

NI myDAQ Student Bundles


NI myDAQ and Circuits 3rd Edition Textbook Bundle

As Low As:   $250.00

NI myDAQ - Student with 30 Day Software Evaluation