TinkerKit Gyroscope 2 Axis sensitivity 4X is a device that measures orientation. This module outputs 0V to 5V on one of its two signal pins when its angle is changed (e.g. is moved). The value is approximately 2.5V when there is no angle change in the X or Y axis. When you connect this module to the input on an Arduino using the TinkerKit Shield, you can expect to read values between 0 to 1023, while changing the angle of the module.
This version of the module outputs the 4X pins on the chip. It is a sensor and each connector is an output, which must be connected to one of the input connectors on the TinkerKit Shield.
