The Studica Robotics FTC Drive Base Kit is ideal for FIRST teams, robotics competitions, and education. It is valued at $399. This is a special offer and it is only available for a limited time. FTC teams, please provide your team name and number.
The Mobile Robotics VMX/Titan Workshop Kit is used in the classroom for teaching, testing and doing research in mobile robotics. It includes each the essential components and is referenced in the WorldSkills Mobile Robotics Shanghai 2022 training material.
The Studica VMX FRC-compatible Training Bot (FRC Trainer) is a smaller, sturdy, lightweight, and less expensive robot than your typical FRC robot. If you have a large FRC team, often only a handful of students get to learn how to create and program your team’s costly competition robot. The FRC Trainer solves this problem and is ideal for groups of two to three to participate in hands-on learning in a classroom environment. Schools can equip their labs with multiple FRC Trainers, benefiting from the great value and compact size. Students can even take it home with them!
This affordable solution is intended for:
The FRC-compatible Trainer is an intelligent and autonomous robot that uses the VMX Advanced Robotics Controller which can be programmed in C++ and Java. VMX’s multitude of modern digital communications interfaces and Linux-based operating system allow users to directly access most modern devices (e.g., Intel RealSense tracking and depth cameras and LIDAR).
VMX-Pi Key Use Cases and Hardware/Software Features and Benefits
VMI-Pi Key Use Case Document is available here
Studica accepts Purchase Orders from Schools and established companies, offering net 30 terms upon review and approval. Contact us at sales@studica.com for more information.
The WorldSkills Mobile Robotics Collection – Shanghai 2022 by Studica is the authorized collection for the WorldSkills Mobile Robotics Competition. Featuring the Studica VMX Robotics Controller for WorldSkills, the Titan Quad Motor Controller and Servo Power Block. This comprehensive Collection also includes electronics, accessories, motors, servos, mounts, U-Channel, mounting plates, flat brackets, irregular brackets, and flat beams. You'll also find gears, sprockets, pulleys, belts, axles, slides, rack & pinion, wheels, bushings, bearings, coupling, collars, spacers, screws, nuts, and standoffs. Includes Everything You Need (Over 1500 components).
Analog 180° Micro Servo module is a high quality micro servo with the standard TinkerKit 3 pin connector to be plugged in the sensor shield.
Arduino GSM Shield 2 (integrated antenna): It comes with an audio Jack, the new M10 firmware.
Arduino Micro without headers is a microcontroller board based on the ATmega32u4, developed in conjunction with Adafruit. The Micro is similar to the Arduino Leonardo in that the ATmega32u4 has built-in USB communication, eliminating the need for a secondary processor. This Micro comes without headers.
Arduino Nano is a small, complete, and breadboard-friendly board based on the ATmega328 (Arduino Nano 3.x) or ATmega168 (Arduino Nano 2.x). It works with a Mini-B USB cable instead of a standard one. This Nano was designed and is being produced by Gravitech.
Arduino Uno SMD Rev3 is a microcontroller board based on the ATmega328. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. The Uno differs from preceding boards in that it does not use the FTDI USB-to-serial driver chip.
Codey Rocky is a coding robot for STEAM education. It provides an
entertainment learning experience of programming for children of ages 6+.
The combination of easy-to-use robotics hardware with block-based programming
software mBlock 5, guarantees that beginners can get started coding within
minutes. With just one click you can turn your visual code into Python code and
continue learning an advanced and practical language.
mBlock 5 supports AI-functionality and Internet of Things-functionality, giving
children access to AI and IoT since young and thus equipping them with stronger
competence in an age of intelligence.
Codey is the controller with different sensors and a programmable main control.
It can be used alone mainly for teaching tasks. Moreover, it can work with the
chassis Rocky to perform more tasks.
Rocky is the chassis and can work only by matching with Codey. With Rocky, it
can avoid obstacles, recognize colors, follow lines and etc.
Makeblock Inventor Electronic Kit is a module electronic platform, developed for quick prototyping. This kit includes twelve sensors and actuators, each with a color-coded connector to help simply wiring. Each module is equipped with the Arduino library for quick programming. These electronics are compatible with Arduino programming, as well as MIT Scratch and Ardublock. These alternatives are great for teaching kids how to program and interact with hardware. For additional control functionality, makers can easily attach the Bluetooth module (2.0 or 4.0) and download the Makeblock app. By doing this, you can instantly turn your project into a smart device and control it via your smartphone or tablet.
Makeblock mBot V1.1 is the latest all-in-one solution for teaching young students about programming, electronics and robotics. The improved mBot V1.1 kit provides new ways for children to learn about science, technology, engineering and math (STEM). It is compatible with Scratch 2.0 programming and controlled with Bluetooth or a 2.4GHz wireless module. The new mBot design comes with a casing specially designed for protecting main control board. The casing is also atomized to safeguard children's eyes from the glare of the onboard LED. Additional new features also include auxiliary wheels, improved button configuration, and a lithium battery holder. Let your young learners can experiment with different programming activities, like playing soccer, line-following, obstacle courses and more
Makeblock mBot V1.1 is the latest all-in-one solution for teaching young students about programming, electronics and robotics. The improved mBot V1.1 kit provides new ways for children to learn about science, technology, engineering and math (STEM). It is compatible with Scratch 2.0 programming and controlled with Bluetooth or a 2.4GHz wireless module. The new mBot design comes with a casing specially designed for protecting main control board. The casing is also atomized to safeguard children's eyes from the glare of the onboard LED. Additional new features also include auxiliary wheels, improved button configuration, and a lithium battery holder. Let your young learners can experiment with different programming activities, like playing soccer, line-following, obstacle courses and more
Makeblock mBot-S Educational Explorer Kit is the latest all-in-one solution for teaching young students about programming, electronics and robotics. The improved mBot kit provides new ways for children to learn about science, technology, engineering and math (STEM). It is compatible with Scratch 2.0 programming and controlled with Bluetooth and includes the LED Matrix. The new mBot design comes with a casing specially designed for protecting main control board. The casing is also atomized to safeguard children's eyes from the glare of the onboard LED. Additional new features also include auxiliary wheels, improved button configuration, and a lithium battery holder. Let your young learners can experiment with different programming activities, like playing soccer, line-following, obstacle courses and more
The Makeblock Neuron Inventor Kit, an essential package including programmable electronic building blocks of sound, light, sensors, etc. Combined with intuitive flow-based programming, Neuron encourage all creators to turn unlimited ideas into real gadgets.
Makeblock Starter Robot Kit is the ideal kit for those interested in exploring robotics and the maker world. With a set of beginner-friendly instructions, this kit takes beginner builders through learning robotics, electronics and programming. It is even compatible with some of the world's leading, open-source solutions including Scratch 2.0 programming and Arduino micro-controller boards. The Starter Robot Kit also allows you to build two different robots, a robot tank or the three-wheeled robot car. Get excited about robotics with this comprehensive robotic kit
The Ultimate Makerspace Kit is a one-stop-solution for students and makers construct your own robot. In total, the kit has 1915 parts packed into 19 boxes.
This kit contains a MegaPi Pro main control board, 180 encoder motors, 36 encoder motors, smart servos, brushless motors, driver modules and other relative extension modules. Due to the rich functionality, it can help you to upgrade the power outputs of the existing system and the capacity of main control, and extends more combinations.
This kit includes various screws, fasteners, and assembling tools, which are used to fix and connect individual parts together.
This kit includes DC motor, stepper motor, servo motor, encoder motor, and driver modules, which can provide power output for the system. The diversified functions can meet various requirements on accurate position-control, speed control, large torgue, and more.
mBot Add-on Pack Interactive Light & Sound is a 3-in-1 pack based on mBot. You can construct "lighting chasing robot", "Scorpion robot" and "Intelligent voice-activated desk light " with mBot and the components in this Pack Each one has infinite possibility. To experience the magic of mBot in the changing light and sound.
mBot six-legged robot is a 3-in-1 expansion pack based on mBot. You can construct "Beetle", "Mantis" and "Crazy Frog" with mBot and the parts inside the Pack The mBot six-legged robot makes mBot more vivacious and enjoyable. Let's get your six-legged robot move
Makeblock mBot Ranger Robot Kit is a three-in-one STEM educational robot, perfect for discovering the world of programming. This robot kit includes ready-to-use projects with the built-in Makeblock HD app for instant fun and play, right out of the box. Use the graphical programming, mBlock, to help kids learn all about entry-level coding. Developed with a three-in-one design, the mBot Ranger can be constructed in three different robot forms. Choose from the robot tank, self-balance car and the 3-wheeled car models. Need a little help? Like most Makeblock kits, the Ranger kit provides access to numerous online guides for additional help and development.
mBot is an all-in-one solution to enjoy the hands-on experience of programming, electronics, and robotics. Working with mBlock inspired by Scratch 2.0, connecting with computers or smart devices via Bluetooth or 2.4G (by different version), this easy-to-assemble mBot provides infinite possibilities for you to learn STEM (Science, Technology, Engineering, Mathematics).
The TinkerKit! DMX Master Shield is used to drive a series of DMX receivers. In order to be programmed via Arduino, it requires the DMX Library Like a regular shield it has to be plugged on top of the Arduino and it can be stacked on top of other shields. It is used both as OUTPUT and INPUT (also if the official library at the moment supports only the OUTPUT communication). For each line it has two kinds of port that can be used: the DMX connector or normal pins. On the front it has two DMX connectors, one for the INPUT and one for the OUTPUT.
TinkerKit Gyroscope 2 Axis sensitivity 4X is a device that measures orientation. This module outputs 0V to 5V on one of its two signal pins when its angle is changed (e.g. is moved). The value is approximately 2.5V when there is no angle change in the X or Y axis. When you connect this module to the input on an Arduino using the TinkerKit Shield, you can expect to read values between 0 to 1023, while changing the angle of the module.
This version of the module outputs the 4X pins on the chip. It is a sensor and each connector is an output, which must be connected to one of the input connectors on the TinkerKit Shield.
TinkerKit Linear Potentiometer module is a commonly used variable resistor. This module outputs 5v when the slider is at one end and 0v when moved in the opposite way. When connected to an input on the Arduino using the TinkerKit Shield, you can expect to read values going from 0 to 1023.This module features a 4k7 Ohm linear potentiometer, a signal amplifier, the standard TinkerKit 3pin connector, a green LED that signals that the module is correctly powered and a yellow LED whose brightness changes according to the position of the potentiometer.
This module is a sensor. The connector is an output, which must be connected to one of the input connectors on the TinkerKit Shield.
TinkerKit Red Led [10mm] module is a low power light source that is available in several different colors. It lights up when powered from an Arduino pin. This module features a 10mm red light emitting diode, the standard TinkerKit 3pin connector, a green LED that signals that the module is correctly powered and a tiny yellow LED that shows the current brightness of the red LED. A resistor provides the optimal amount of current when connected to an Arduino.
Note: This module is an actuator, therefore the connector is an input that need to be connected to one of the output connectors on the TinkerKit Shield.
USB 2 Serial Converter converts a USB connection into 5 volt TX and RX that you can connect straight to the Arduino Ethernet or any other boards with an FTDI cable-compatible connector.
An entry-level science kit with 60 safe and fun activities. The topics covered in the kit deal with chemical reactions, acids and bases, chromatography, crystal growing, surface tension, solutions and colloids, expansion of gases, magnetism, optics, growing plants and more. Simple experiments are performed using the contents of the kit and common household items.
The Classroom Robotics Kit from Studica Robotics includes many parts for building a robot for competitions. This kit is ideal for schools wanting to replicate an FTC kit, but not yet involved with FTC.
Download the components list for this kit here.
New for the 2022-2023 Season, the Studica Robotics FTC Starter Kit includes many parts for building a robot for competitions.
Download the Kit List here.
FTC Teams are eligible to get 1 kit at a heavily discounted price. To apply for the discount please fill out this application form.
Students can use components from the Starter Kit to build a robot of their own design. Examples of the Starter Kit with customization are shown above in our images and video.
The FTC Drive Base Kit v2 (70400-v2) is available for FIRST teams only and is fully FIRST legal. This is an upgrade from our first version (part # 70400). It includes our new slim mecanum wheels with bearings on all rollers, allowing you to make a wider base robot. It also has 4 NeveRest Orbital 20 Gearmotors with wires, our new Clamping Shaft Hubs, 4 bumpers and more hardware.