Arduino Micro without headers is a microcontroller board based on the ATmega32u4, developed in conjunction with Adafruit. The Micro is similar to the Arduino Leonardo in that the ATmega32u4 has built-in USB communication, eliminating the need for a secondary processor. This Micro comes without headers.

Arduino Nano is a small, complete, and breadboard-friendly board based on the ATmega328 (Arduino Nano 3.x) or ATmega168 (Arduino Nano 2.x). It works with a Mini-B USB cable instead of a standard one. This Nano was designed and is being produced by Gravitech.

Arduino Uno SMD Rev3 is a microcontroller board based on the ATmega328. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. The Uno differs from preceding boards in that it does not use the FTDI USB-to-serial driver chip.

The TinkerKit! DMX Master Shield is used to drive a series of DMX receivers. In order to be programmed via Arduino, it requires the DMX Library Like a regular shield it has to be plugged on top of the Arduino and it can be stacked on top of other shields. It is used both as OUTPUT and INPUT (also if the official library at the moment supports only the OUTPUT communication). For each line it has two kinds of port that can be used: the DMX connector or normal pins. On the front it has two DMX connectors, one for the INPUT and one for the OUTPUT.

TinkerKit Gyroscope 2 Axis sensitivity 4X is a device that measures orientation. This module outputs 0V to 5V on one of its two signal pins when its angle is changed (e.g. is moved). The value is approximately 2.5V when there is no angle change in the X or Y axis. When you connect this module to the input on an Arduino using the TinkerKit Shield, you can expect to read values between 0 to 1023, while changing the angle of the module.

This version of the module outputs the 4X pins on the chip. It is a sensor and each connector is an output, which must be connected to one of the input connectors on the TinkerKit Shield.

Standard USB 2.0 cable. Use it to connect Arduino Uno, Arduino Mega 2560, or any board with the USB female A port of your computer. Cable length is approximately 178cm.

An entry-level science kit with 60 safe and fun activities. The topics covered in the kit deal with chemical reactions, acids and bases, chromatography, crystal growing, surface tension, solutions and colloids, expansion of gases, magnetism, optics, growing plants and more. Simple experiments are performed using the contents of the kit and common household items.

Introductory Power NI ELVIS Electronics Device—The Integrator Power Electronics Fundamentals Board for NI ELVIS II/II+ is an add-on application board for the NI Educational Laboratory Virtual Instrumentation Suite II (NI ELVIS II) or NI ELVIS II+ for power electronics applications. The Integrator Power Electronics Fundamentals Board for NI ELVIS II/II+ provides both the hardware and lab resources necessary to teach these topics, giving students all components, wires, and instruments needed conduct experiments. The accompanying software includes all lab instructions and provides students with a simple method of conducting and exporting results of experiments for each lab.

The myGrid for NI myDAQ is an AC power grid that will help a student investigate the components of a power grid. The myGrid interfaces with NI myDAQ to demonstrate energy monitoring, energy conservation, and the concept of the smart grid. The system includes a traditional power source through a motor representing fossil fuels and a renewable power source using a solar panel. It models how power is generated, transmitted, and distributed in a residential setting across three houses.

Programmable Xilinx 7020 FPGA NI ELVIS—The NI Engineering Laboratory Virtual Instrumentation Suite (NI ELVIS) III is an engineering laboratory device developed for project-based learning.

Media Composer is the media and entertainment industry’s most used video editing software, accelerating high-res, HDR, and HD workflows. And now with Media Composer | Ultimate (formerly Media Composer)—designed for editorial collaboration and MediaCentral environments—you get access to all Media Composer software options to accelerate your workflow.

Pro Tools Studio enables serious music creators, producers, and engineers to easily create and mix large projects. Pro Tools Studio builds on the current Pro Tools offering with numerous enhancements like increased track counts, surround and Dolby Atmos® mixing and advanced automation features (both previously only available in Pro Tools Ultimate), and more.