Close
Main Categories
    Filters
    Preferences
    Search

    Electronics Hardware

    View as Grid List
    Sort by
    Display per page

    0-15V Power Supply Kit

    #K-11
    $14.95

    0-15VDC @ 250mA 8.5VAC @ 500mA Bredboarding; Prototyping and Training

    0-30VDC @ 5A Analog

    #EDU-61020
    $13.95
    (0 In stock)

    The scientific genius of Leonardo da Vinci is brought to life through these 16 articulated models. The inventions that inspired these snap-together replicas are taken from the pages of da Vinci’s priceless and awe-inspiring notebooks. All models are made of plastic and require no special tools. Manuals are very educational and teach how these inventions have evolved into what they are today.

    0-50VDC @ 3A LCD Display

    #XP-752A
    $335.99
    (0 In stock)

    The Elenco variable voltage supplies all feature fail-safe automatic overload protection with output current externally adjustable. Special circuit protects equipment; user and itself. Current limiting adjustment is easy. Simply short output and adjust limit control to read desired maximum current. The output voltage is continuously variable and precisely held to your setting.

    1% 1 Watt Resistor Substitution Box

    #RS-500
    $52.99
    (0 In stock)

    Any Value 1% Resistors from 1 Ohm to 11.111M Ohm Increments 1 Watt Resistors.

    100 pc Capacitor component kit

    #CAPK-100
    $19.90
    (115 In stock)

    Contains ceramic disc, mylar, and electrolytic-type capacitors. 21 varieties, 100 pieces total - 30 ceramic from 10pF to 470pF, 35 mylar from 0.001?F to 0.220?F, and 35 electrolytic from 1?F to 1000?F. Packaged in a cardboard organizer box.

    100 pc. Transistor Kit

    #TRAK-100
    $22.68
    (7 In stock)

    Contains an assortment of transistors, NPN, PNP, FETs, Darlington, and Power. 100 pieces total, 15 types. Packed in a cardboard organizer box.

    100kHz Function Generator

    #FG-500
    $53.59
    (0 In stock)

    Features:

    • Sine; Square and Triangle Wave Generator 1Hz - 1MHz Sine Wave Distortion Less Than 1% Square Wave Symmetry Less Than 1%
    • Runs on a 9V battery.
    • Also available in kit form FG500K.

    12 pc. Computer Service Tool Kit

    #TK-1100
    $17.95
    (0 In stock)

    Features:

    • 3/16 Nut Driver 1/4 Nut Driver
    • PR3- 3-prong Parts Retriever Reversible screwdriver bits T10; T15
    • Reversible slotted screwdriver bits 3/16 & 1/4
    • Reversible phillips screwdriver bits #1 & #2
    • ET10- IC puller ET14-IC Inserter 14-16 pin
    • ST101A- 1/8 Slotted Screwdriver ST101B- #0 Phillips Screwdriver
    • ST17- Insulated Tweezer Driver handle - Fits all bits
    • C20- Zippered Vinyl Case

    130-in-1 Electronics Playground - 130-in1 Electronics Playground

    #EP-130
    $50.78
    (0 In stock)

    A great introduction to the world of electronics!
    Start a great hobby in electronics. Spring coil connections make it safe and easy for anyone to use. Includes detailed; step-by-step illustrated manual for easy construction. Comes with built-in speaker; 7-segment LED display; two integrated circuits and rotary controls. Everything you need to build an AM Broadcast Station; Electronic Organ; Strobe Lights ; Timer; Logic Circuits and Much More!

     

    140 pc. Pre-formed Jumper Wire Kit

    #JW-140
    $9.99
    (66 In stock)

    Contains 140 lengths of pre-stripped; pre-formed #22 solid wire in various colors. Contains 14 different lengths of 10 pieces each. Storage case included.

    1660 Tie Point Breadboard with Jumper Wire Kit

    #9483WK
    $21.95
    (18 In stock)

    Model 9433 Breadboard bundled with JW70 Jumper Wire Kit. 1660 test points; 252 separate 5 point terminals; plus 8 horizontal bus lines. Three color coded binding posts; black; red and green. 70 pieces pre-stripped; pre-formed solid #22 wire.

    2.5mm Hex Ball End Screwdriver

    #70142
    $5.99
    (16 In stock)

    20 Pin Screw Terminal Block Connector

    #70161
    $7.49
    (277 In stock)

    Used to replace or supplement connector on NI myDAQ Kit.

    23 Range 20k/V VOM

    #M-1250
    $31.46
    (0 In stock)

    Features:

    • 20,000Ω /V
    • 23 Ranges
    • 3 1/2 Meter
    • Mirrored Scale
    • Audible Continuity
    • Checks Transistors/Diodes
    • 10A DC Current
    • dB Scale
    • Battery Test
    • Safety Test Leads
    • Available as kit Model M1250K

    2390 Tie Point Breadboard with Jumper Wire Kit

    #9488WK
    $32.95
    (124 In stock)

    Model 9438 Bredboard bundled with JW140 Jumper Wire Kit. 2390 test points; 378 separate 5 point terminals; plus 10 horizontal bus lines. Four color coded binding posts; black; red; yellow and green. 140 pieces pre-stripped; pre-formed solid #22 wire. 14 different length.

    288x Astrolon Telescope with Aluminum Tripod

    #EDU-36944
    $72.94
    (0 In stock)

    Features:

    • 6 x 25mm Finderscope
    • 2.3x Barlow lens
    • 50mm  Objective lens
    • Diagonal viewer and two (2) interchangeable eyepieces
    • Space map
    • 36” Adjustable aluminum tripod
    • Includes carrying case

    2-Way Microscope

    #EDU-41009
    $46.47
    (0 In stock)

    Two Way Microscope with Viewer and Projector

    30 pc. Reinforced Jumper Wire Kit

    #JW-30
    $15.84
    (0 In stock)

    Elenco's 30 pc. Reinforced Jumper Wire Kit contains 30 pieces of reinforced; male to male jumpers. 10 pieces each of 2 ; 4 ; and 6 . Assorted colors.

    30MHz Dual Trace

    #S-1325
    $479.95
    (0 In stock)

    Features:

    • Dual or Single Trace Operation
    • Calibrated 20 Step Timebase with x10 Magnifier
    • AUTO/NORM Triggered Sweep Operation with AC; TV-H; TV-V and Line Coupling
    • 1mV/DIV Sensitivity
    • Front face dust cover included.
    • 2 FREE probes (x1 & x10) included.

    3220 Tie Point Breadboard with Jumper Wire Kit

    #9480WK
    $43.95
    (61 In stock)

    Model 9440 Breadboard bundled with JW350 Jumper Wire Kit. 3220 test points; 504 separate 5 point terminals; plus 14 horizontal bus lines. Four color coded binding posts; black; red; yellow and green. 350 pieces pre-stripped; pre-formed solid #22 wire. 14 different length.

    34 pin MXP Extender Cable

    #70001EC
    $7.96
    (1 In stock)

    Extend the reach of your MXP port by using this 8 inch cable to re-position you boards where you need them.

    Compatable with MXP accessory boards like the protoboard, RIOduino and myRIO.

     

    Features:

    • Keyed male and female 34-pin connectors
    • 28 AWG ribbon cable
    • 34 conductor
    • 8? length

    34 Pin MXP extender cable - 8 inch

    #69003
    $3.99
    (0 In stock)

    Extend the reach of your MXP port by using this 8 inch cable to re-position you boards where you need them.  Compatable with MXP accessory boards like the protoboard, RIOduino and myRIO.

     

    Features:

    • Keyed male and female 34-pin connectors
    • 28 AWG ribbon cable
    • 34 conductor
    • 8″ length

    350 pc. Pre-formed Jumper Wire Kit

    #JW-350
    $19.99
    (106 In stock)

    Features:

    • Contains 350 lengths of pre-stripped; pre-formed #22 solid wire in various colors.
    • 14 different lengths of 25 pieces each.
    • Storage case included.

    365 pc. 1/2W Resistor Kit

    #RK-365
    $26.99
    (0 In stock)

    Contains five (5) each of 73 standard values, from 1? to 1M? - 1/2 watt, 5% tolerance, carbon film - 365 pieces total.

    370 pc. 1/4W Resistor Kit

    #RK-370
    $17.95
    (142 In stock)

    Contains five (5) each of 74 standard values from 1? to 10m? 1/4 watt, 5% tolerance, carbon film. 370 pieces total, 74 values. Packaged in a cardboard organizer box.

    3D ECO-ABS Black 0.75kg

    #ECO-BLA-01
    $39.99
    (0 In stock)

    The Dremel 3D printer melts and prints the 1.75mm Eco-ABS filament layer by layer no thicker than a sheet of paper to provide a very smooth surface for your creation. Perfect for printing durable and impact resistant 3D objects.

    • Produced in a sustainable way

    • RFID filament recognition tag - Printer automatically adjusts settings by reading the filament RFID tag

    • Provides users with durable and impact resistant prints

    3D ECO-ABS White 0.75.kg

    #ECO-WHI-01
    $39.99
    (0 In stock)

    The Dremel 3D printer melts and prints the 1.75mm Eco-ABS filament layer by layer no thicker than a sheet of paper to provide a very smooth surface for your creation. Perfect for printing durable and impact resistant 3D objects.

    • Produced in a sustainable way

    • RFID filament recognition tag - Printer automatically adjusts settings by reading the filament RFID tag

    • Provides users with durable and impact resistant prints

    3D PETG Translucent 0.75 kg

    #PETG-TRA-01
    $39.99
    (0 In stock)

    The Dremel 3D printer melts and prints the 1.75mm PETG filament layer by layer no thicker than a sheet of paper to provide a very smooth surface for your creation. Ideal for printing flexible and heat resistant 3D objects ensuring excellent layer adhesion and low chances of shrinkage and warping.

    • RFID filament recognition tag - Printer automatically adjusts settings by reading the filament RFID tag

    • Provides a finishing durable like ABS and easy to print like PLA

    • Ensures excellent layer adhesion and low chances of shrinkage and warping which brings printing with ease

    3D40 FLEX Build Plate Assembly

    #BP40-FLX-01
    $69.99

    Designed for the Dremel 3D40 FLEX 3D Printer, the Dremel 3D40 FLEX Build Plate Package is made of spring steel and has a flexible surface. This package comes with a build plate holder and a pre-installed build sheet. The magnetic build plate holder has latches and is designed specifically so you can print large 3D models without warping. The build sheet is pre-cut to fit your 3D40 FLEX build plate. The handles on the build plate make it easy to remove your finished 3D models. You can also use this build plate with the Dremel 3D 3D40-01 and the 3D40-EDU.

    3DConnexion CadMouse Wireless

    #3DX-700062
    $79.20
    (0 In stock)

    3DConnexion's CadMouse Wireless is not just another mouse, It is a professional tool developed around performance, precision and ease of use for engineering in CAD. Its compact, ergonomic design offers you a dedicated middle mouse button and an intelligent scroll wheel. It provides effortless precision due to its optimized 7.200 dpi optical sensor and a constant tactile feedback for smooth mouse movement. Despite its performance, you can work up to 2 months without charging and easily connect via Universal Receiver, Bluetooth or USB-cable.

    3DConnexion SpaceMouse Compact

    #3DX-700059
    $119.20
    (1 In stock)

    The SpaceMouse Compact was developed to deliver an intuitive, effortless and precise 3D navigation in CAD applications that cannot be experienced by using a standard mouse and keyboard. It is the ideal tool for modern engineers, architects and designers to review 3D designs and explore 3D spaces.

    3Dconnexion SpaceMouse Pro

    #3DX-700040
    $239.20
    (1 In stock)

    3Dconnexion SpaceMouse Pro is the latest addition to 3Dconnexion’s line of professional 3D mice. It features a full size, soft coated hand rest and 15 large, fully programmable function keys for access to application commands, standard views and keyboard modifiers while a convenient On-screen Display provides visual support.

    3DConnexion SpaceMouse Wireless

    #3DX-700066
    $135.20
    (0 In stock)
    3Dconnexion®, the global leader in advanced 3D navigation devices, is proud to announce SpaceMouse® Wireless, the world’s first wireless 3D mouse.  For the first time, SpaceMouse Wireless combines 3Dconnexion’s 6-degrees-of-freedom (6DoF) sensor with 3Dconnexion 2.4 GHz wireless technology to deliver the reliability of a wired device, without the clutter of cords. The SpaceMouse Wireless battery lasts up to one month* and when it does need recharging, simply connect the supplied micro-USB cable and continue working.
     
    *Battery life of up to 1 month is based on 8 hours use per day, 5 days per week

    4-in-1 Electronic Project Lab

    #MX-902
    $40.68
    (0 In stock)

    Building this kit is safe, solderless, educational. Includes easy to read manual. Discover how an electric bell is constructed and how it's made to ring. Discover how a generator makes electricity. Requires 2 AA batteries Age 10 & Up.


    5-in-1 100x-1200x Deluxe Microscope

    #EDU-23703
    $72.94
    (0 In stock)

    Features:

    • 11” microscope with micro viewer
    • Microphoto projector and drawing device
    • Micro Hatchery®
    • Micro Slicer®
    • (2) Prepared slides
    • (10) Blank glass slides
    • (12) Cover glasses
    • (12) Statical slide covers
    • (12) Blank labels
    • (4) Collecting containers
    • Petri dish with Magnifier®
    • Spare bulb
    • (3) 10mL Graduated cylinders
    • (2) Collecting vials
    • Tweezers and needle
    • Spatula, scalpel, dropper, stirring rod
    • 3x / 6x Magnifier
    • Scissors, condenser lens cap, and safety glasses
    • Instruction manual

    6 in 1, slotted, phillips and hex screwdriver

    #70141
    $5.99
    (90 In stock)

    Includes 6 bits,

    • Slotted 3.3
    • Phillips: OHO
    • Hex 1/16inch
    • Hex 3/32inch
    • Hex 7/64inch

    70 pc. Jumper Wire Kit

    #JW-70
    $5.45
    (1 In stock)

    Contains 70 pieces of pre-stripped; pre-formed #22 solid wire in assorted colors and lengths. Storage case included.

    80 pc LED component kit

    #LEDK-80
    $19.90
    (0 In stock)

    Contains a variety of types and colors: Small, standard, large, rectangular, bi-color, blinking, ultra bright, red, amber, green, blue, yellow, and white. 80 pieces total, 18 varieties. Packaged in a cardboard organizer box.

    830 Tie Point Breadboard with JW70 Jumper Wire Kit

    #9485WK
    $15.95
    (7 In stock)

    Model 9425 Breadboard bundled with JW70 Jumper Wire Kit. 830 test points; 126 separate 5 point terminals; plus 4 horizontal bus lines. Three color coded binding posts; black; red and green. 70 pieces pre-stripped; pre-formed solid #22 wire.

    9 pc. Electronic Technician Starter Kit

    #TK-14
    $19.90
    (3 In stock)

    Features:

    • SR1N- 25 watt soldering iron with stand
    • ST2- 5" needle nose pliers
    • ST3- wire stripper
    • ST5- 3/16" slotted screwdriver
    • ST6- #1 Phillips screwdriver
    • SW3- desolder wick
    • LF99-Lead Free Solder
    • ST23- heat sink

    AC Adapter for Snap Circuits

    #ACSNAP
    $16.29
    (4 In stock)

    Tired of buying batteries for your Snap Circuits. With this battery eliminator you won't ever have to buy batteries again. This Snap Circuits adapter works with all versions of Snap Circuits.

    Anderson PowerPole 45 to JST VH Cable

    #70178
    $3.99
    (0 In stock)

    Basic Electronic Experiments

    #PK-101
    $14.95
    (2 In stock)

    The experiments in Model PK-101 require a bredboard (9830 or better) or can be done on the Elenco XK-150; XK-550 or XK-700 Trainers. No soldering or tools required; all parts included.

    Features:

    • Electronic Keyboard
    • Water Alarm
    • Finger Touch Lamp
    • Electronic Kazoo
    • Battery Tester
    • Magnetic Bridge
    • Voltmeter
    • Morse Code
    • And Much More!

    Basic Parts Kit

    #CK-1000
    $92.34
    (43 In stock)
    This Basic Parts Kit provides you with 100's of parts to aid you in your prototype needs. Perform experiments first hand and develop a greater understanding of key concepts.

    BATUltrasonic Sensor Distance Measuring

    #EDU-36734
    $33.95
    (1 In stock)

    This Chemistry Lab Kit includes 8 safe to use chemicals, 80 safety tested experiments. Comes with complete instruction manual

    BITalino 1-lead sensor cable

    #ACCELCTRDCAB
    $11.00
    (11 In stock)

    BITalino 1-lead sensor cableis anindividual cable to connect the sensor pins (IN+, IN-, and REF) to the electrodes.

    Features:

    • Length: 40cm (others possible on request)
    • Sensor connector: Crimp pin (compatible with the individual pins on the Molex Sherlock male plug)
    • Electrode connector: Standard snap on socket

    Blue Tape (Pack of 10)

    #BT41-01
    $32.99
    (0 In stock)

    Breadboard and Jumper Wire Kit

    #9880WK
    $10.95
    (40 In stock)
    This NI Breadboard is a 830 tie point breadboard that comes with a 70 piece jumper wire set designed for use with National Instruments myDAQ portable data acquisition device.

    Build Platform (Each)

    #BP40-01
    $27.99
    (0 In stock)

    Build Platform (Each)

    #BP20-01
    $32.99
    (0 In stock)

    Build Sheet ( Pack of 3)

    #BT40-01
    $32.99
    (0 In stock)

    CadMouse Pad Compact

    #3DX-700068
    $19.00
    (1 In stock)

    he3Dconnexion CadMouse Pad Compactsports a micro-textured surface for your mouse to offer mouse cursor accuracy and smooth movements. The CadMouse Pad Compact is constructed with three layers that provide a low-friction surface, rigid middle layer, and non-slip silicone base. Additionally, it features a compact design, making it suitable for mobile workplaces or setups with limited space.

    Smooth Surface

    The micro-textured coating of the CadMouse Pad provides precision for engineering tasks. In combination with the PTFE feet of a mouse, this pad allows smooth, accurate control of your mouse.

    Accuracy

    In addition to its tactile advantages, the low friction surface of the CadMouse Pad enhances its tracking qualities whether you work with the laser sensor or the optical sensor in a mouse. This ensures accurate sensor imagery for an exact translation of your hand movements into cursor movements.

    Stability

    The surface enhances precision while the rigid middle layer ensures stability. The silicone base keeps your CadMouse Pad in place so it won´t slip while you are working.

    UPC: 821123700581

    Carrying Case

    #9NICASE1
    $39.95
    (0 In stock)

    Holds the NI myDAQ with test leads, the protoboard for the myDAQ, and the JW-140 jumper wire kit

    Chain Breaker Tool

    #76231
    $29.99
    (19 In stock)

    The easy way to change the length of your #25 chain. (Chain not included)

    Circuit Tester

    #ST-37
    $4.66
    (0 In stock)

    Features:

    • Tests AC and DC Circuits
    • Four Voltage Ranges: 110V; 220V; 277V; 460V
    • Tests Voltage; Polarity; and Grounding
    • Lamps Glow when Voltage is Present
    • Insulated Housing with Pocket Clip

    Circuits Textbook, Second Edition - On sale while quantities last!

    #978-1-934891-19-3
    $52.00
    (25 In stock)
    The Circuits Second Edition textbook conveys a set of timeless principles and problem solving techniques for a first course in electrical engineering circuit analysis, it also provides a valuable framework for subsequent studies. The Circuits second edition textbook offers a number of significant enhancements.

    Circuits, Third Edition Textbook

    #784236-01
    $154.00
    (In stock)

    Circuits, Third Edition Textbook helps students understand a wide range of timeless principles and problem techniques that are essential to circuit studies. Generally, circuit theory is the entry course in pursuing education in electrical and computer engineering. While this book is a great introductory text, a background in physics and elementary differential and integral calculus is assumed.

    Combination Wrench, 5.5mm

    #70145
    $6.99
    (8 In stock)

    Combo Resistor/Capacitor Kit 465 pcs

    #RCK-465
    $35.80
    (12 In stock)

    This combo kit contains a resistor kit RK-365 with 5 each of 73 values for a total of 365 pieces and the capacitor kit CAPK100, which contains 21 varieties of capacitors (ceramic, mylar, and electrolytics) for a total of 100 pieces. Altogether, this kit contains 465 pieces

    Computer Inteface for Snap Circuits

    #CI-73
    $16.29
    (0 In stock)

    The CI-73 allows the SC-300 or SC-500 set to interface with a computer! With this module, you will learn about and use an oscilloscope and spectrum analyzer, as you build over 73 BONUS PROJECTS using your Windows-based PC (32 projects require the SC-500). Comes with all of the interface parts you need and the software. Great for introducing electronics through a computer. Acts as a scope and allows you to see the signals in the circuit.

    databot Single

    #AROBOTICS-SIN-GP

    Meet databot™ – one tiny brilliant cube packed with high-tech, science exploration fun.  Databot™ fits in the palm of your hand, collects information from 11 included sensors that measure motion, temperature, altitude, velocity and so much more!  The data is streamed instantly to provide engaging experiments in science, coding, and technology in every learning environment imaginable! The databot™  kit includes everything you need to get started – just add a computer or tablet!

    Deluxe 150 piece Capacitor component kit in plastic case

    #CAPK-150DEL
    $28.74
    (2 In stock)

    Contains ceramic disc, mylar, and electrolytic-type capacitors. 21 varieties, 150 pieces total - 60 ceramic from 2.2pF to 0.001?F, 50 mylar from 0.001?F to 0.47?F, and 40 electrolytic from 1?F to 1000?F. Packaged in a clear plastic case with 12 dividers.

    Deluxe Diode Kit in plastic case 100 pcs

    #DIOK-100DEL
    $26.35
    (0 In stock)

    Contains an assortment of silicon, zener, germanium, bridge and switching. Packaged in a clear plastic case with 12 dividers.

    Diode Kit 80 pcs

    #DIOK-80
    $19.90
    (0 In stock)

    Contains an assortment of silicon, zener, germanium, bridge, and switching diodes. 80 pieces total, 20 types. Packaged in a cardboard organizer box.

    Dremel 3D40 3D Printer w/Flex BuildPlate

    #3D40-FLX-01
    $1499.00
    (34 In stock)

    The 3D printer that provides you what you really need - efficiency, high quality and easy print removal.

    • Easy, safe removal of 3D printed models due to flexible metal build plate

    • Maximise utilisation of the machine: Draft mode printing profile allows to print up to 30% faster than low resolution

    • Better print results: more intricate and detailed designs with the improved 50 micron ultra high print resolution combined with guided 2-point semi automated leveling

    • Optimal safety and less chance for warping of large objects thanks to fully enclosed sturdy plastic design with a 254 x 152 x 170 mm build volume

    • No installation needed: Fast out of the box use thanks to the easy setup supported by the user-friendly touchscreen control center on the hardware

    Dremel 3D40 FLEX Build Sheets (3)

    #BT40-FLX-01
    $32.99
    (88 In stock)

    Easily remove 3D prints from your Dremel 3D40 FLEX 3D printer's build plate by printing directly onto the Dremel 3D FLEX Build Sheet instead. This pack includes three build sheets, each pre-cut to fit the 3D40 FLEX flexible build plate. You can also use these sheets with the Dremel 3D 3D40-01 and the 3D40-EDU.

    Dremel 3D40 FLEX Flexible Build Plate Only

    #BP40-FLX-02
    $27.99
    (0 In stock)

    The right support for your DigiLab 3D40 FLEX - avoid warping and ensure easy print removal

    • Help parts stick to your 3D40 FLEX Flexible Build Plate

    • Each sheet lasts up to 50 builds

    • Includes 2 3D40 FLEX Build Tapes

    • Pre-cut to fit your Dremel 3D40 FLEX Flexible Build Plate

    Dremel 3D45 Build Plate

    #BP45-01
    $27.99
    (0 In stock)

    Dremel DigiLab 3D45 3D Printer

    #3D45-01
    $1999.00
    (0 In stock)

    High quality 3D printer - Bring the power of advanced FDM 3D printing to your desktop

    • The perfect printer for design creations and prototyping with a variety of filament types

    • Wifi connectivity, built-in HD camera and included Dremel DigiLab 3D slicing software to manage your prints remotely. You can also print via USB

    • Closed build area with optimised cooling and filtration system to keep out dust and avoid fumes

    • High quality 3D builds a resolution up to 50 microns which is printed on a heated bed to avoid warping

    • RFID built-in to detect the filament type (PLA, Nylon, Eco-ABS, PETG) inserted and to automatically change printer settings

    Dremel DigiLab Gluestick (3pack)

    #GS45-01
    $8.99
    (0 In stock)

    Electronic Cricket

    #K-16
    $7.95
    (0 In stock)

    The Electronic Cricket is the perfect project and fun game for family and friends. You will drive your friends crazy trying to find it! Requires (1) 9V battery (not included).

    Electronic Decision Maker Kit

    #MK-135
    $10.44
    (0 In stock)

    Helps making difficult yes or no decisions. Ideal for the indecisive. Simplay push the button to start flashing of YES/No LEDs. Flahing speed gradually decreases and finally one LED remains.

    Electronic Playground 50-in-1 Experiments

    #EP-50
    $23.50
    (1 In stock)

    Build over 50 Electronic projects including finger touch lamp; metal detector; transistor radio; alarm. Learn about voltage; current; resistors; capacitors and much more. Uses spring hook-up method. This Lab is commonly used in the Bob Jones Home School Curriculum.

    Ethernet Shield

    #EDU-4001
    $11.95
    (2 In stock)

    Build your own remote control robot controlled by your TV remote! The kit also includes parts for inventing your own robot arm. No soldering required.

    FLASHFORGE Dreamer Dual Extrusion 3D Printer

    #3D-FFG-DREAMER
    $934.16
    (0 In stock)

    The FLASHFORGE Dreamer is a high quality with dual extrusion technology 3D printer that provides a great learning experience to 3D printing. The FLASHFORGE Dreamer provides user experiences like no other 3D printer on the market.

    FM Radio Kit

    #MX-901F
    $15.84
    (0 In stock)

    Learn and build your own FM Radio kit. Easy to read illustrated operating manual. Safe solderless, educational and fun. Requires one 9 V battery. Ages 8 & Up.


    Freaduino MEGA2560 White Color MB_FRDN011

    #EDU-7090
    $37.95
    (0 In stock)

    WARNING CHOKING HAZARD- Small parts. Not for children under 3 yrs.

     

    Join forces with the world of robotics and assemble 3 fantastic robots. One robot detects objects using infrared rays. The wake-up robot is sensitive to light and the third robot is operated by any TV remote control. A separate circuit and body are supplied for each robot: just fix the selected circuit onto the robot base and add the corresponding transparent body. Includes one (1) pre-assembled PC board and three (3) robot bodies which allows you to build three (3) different robots one at a time.

    No soldering required!

     

    Freaduino UNO Rev2.2 MB_EFUNO

    #EDU-61009
    $13.95
    (1 In stock)

    Leonardo da Vinci improved upon the already-established catapult design when he introduced his own vision of the age-old military launching device. This design uses a double leaf spring to produce a great deal of energy in order to propel stone projectiles or flammable materials over large distances. A hand crank on the side of the catapult was used to load the spring.

    FreaksBotMotor Driver Mainboard (new board)

    #EDU-61021
    $13.95
    (0 In stock)

    The scientific genius of Leonardo da Vinci is brought to life through these 16 articulated models. The inventions that inspired these snap-together replicas are taken from the pages of da Vinci’s priceless and awe-inspiring notebooks. All models are made of plastic and require no special tools. Manuals are very educational and teach how these inventions have evolved into what they are today.

    Goldcap capacitor 10F /2,7V w. Socket

    #181581
    $15.30
    (In stock)

    Hex Key Metric 9 Piece Set (1.5mm to 10mm)

    #70144
    $9.99
    (9 In stock)

    HVAC Master Tool Kit

    #TK-8200
    $224.95
    (0 In stock)

    Complete Tool Kit for Troubleshooting HVAC Systems Includes Two Meters for Making All Critical Voltage; Current and Temperature Measurements. Same as TK8100 except a large durable tool bag that is manufactured with heavy-duty nylon material many pockets. It is designed with an open top for ease of access and triple-bottom construction and sturdy handles.

    HVAC Tool Kit

    #TK-8100
    $249.95
    (0 In stock)

    Complete Tool Kit for Troubleshooting HVAC Systems Includes Two Meters for Making All Critical Voltage; Current and Temperature Measurements.

    Hydrolab Greenhouse System

    #EDU-8740
    $41.95
    (0 In stock)

    Complete greenhouse system for cultivating plants and vegetables, in an indoor environment, without soil using a modern Hydroponics system. Ages 8 & Up.

    IC Inserter

    #ET-14
    $3.40
    (0 In stock)

    IC Inserter for 14/16-Pin

    IC Puller

    #ET-10
    $2.32
    (0 In stock)

    Stainless Steel Construction for Removing IC's Insulated Vinyl Grip.

    Impact Punch Down Tool/66 Blade

    #ST-630
    $36.95
    (0 In stock)

    Adjustable pressure control suitable for 66 and 110 or KRONE terminal blocks. Includes (1) type 66 blade. Storage for 1 spare blade in handle

    Line Tracking Mouse Kit

    #21-880
    $28.95
    (0 In stock)

    The Line Tracking Mouse tracks a black line using a photo interrupter for its eyes. Sound activated with two sets of gear motors. Soldering is required. Requires four AA batteries. Ages 12 & Up.


    Line Tracking Robot Kit

    #21-890
    $21.95
    (0 In stock)

    Logic Probe

    #LP-560
    $32.99
    (0 In stock)

    Hand-held digital logic probe provides convenient and precise use in the measurement of logic circuits. Displays logic levels (high or low); pulses and voltage transients down to 25 nanoseconds. High intensity LED readouts provide instant response to the logic state.

    Logic Probe & Pulser

    #LP-900
    $28.95
    (0 In stock)

    Two-in-One Logic Probe and Pulser That Simplifies Troubleshooting and Analyzing Digital Circuits Frequency Response 50MHz Detectable Pulse Width 10ns

    Logic Probe Kit

    #LP-525K
    $17.95
    (1 In stock)

    Key Features:

    • Provides convenient and precise use in measurement of logic circuits.
    • Displays logic levels (high or low); pulses and voltage transients down to 25 nanoseconds and a maximum input of 20MHz.
    • Large PC board and detailed manual for fast and easy construction.

    Logic Pulser Kit

    #LP-425K
    $17.95
    (0 In stock)

    LP425 K Injects a Signal Directly Into a Circuit without Disconnecting Components Switchable Output of .5 or 400Hz @ 100mA Designed for Easy Construction

    M105 Analog VOM

    #M-105
    $28.86
    (0 In stock)

    Features:

    • 10000ohms/V DC; AC Reads Volts; Amps; Ohms 15 Ranges
    • Pocket Size
    • Battery Tester
    • Battery Checker

    Makeblock 3D Printer nozzle Bracket A

    #62414
    $3.99
    (3 In stock)

    Makeblock 3D Printer nozzle Bracket A is designed specially for use as the bracket for a 3D Printer nozzle. This component is made from 6061 aluminum with a design for proper mounting and room for the nozzle extrusion. It has a high load capacity and is easy to mount.

    MXP Breadboard for myRIO

    #210-283
    $19.99
    (1 In stock)

    MXP Breadboard for myRIO is a 300 tie breadboard with a 50 tie bus bar on an expansion card compatible with the myRIO Expansion Port (MXP). The MXP Breadboard functions as an I/O breakout, with digital and analog signals mapped to two headers on either side of the breadboard itself. The MXP Breadboard's connector is also keyed to ensure correct connection with your NI myRIO.

    myDAQ - Hardware only - For Students

    #781325-01
    $219.94
    (In stock)

    myDAQ - National Instrument's NI myDAQ is designed to give students the ability to work on engineering course work and experiment with projects hands-on anywhere, anytime. The NI myDAQ is a high-quality instrumentation device that gives students the power to prototype systems and test circuits outside of the classroom while improving comprehension with continuous reinforcement.  (Only for sale to students in the USA).

     

    (Special offer - optional myDAQ accessory myGRID for NI myDAQ - an AC power grid that will help you to investigate the components of a power grid, availble as a bundled purchase only, while supplies last).

    myDAQ for K12 Classrooms

    #NI-MYDAQ-CLASS-GP
    Request Quote

    National Instrument's NI myDAQ is designed to give students the ability to work on engineering course work and experiment with projects hands-on anywhere, anytime. The NI myDAQ is a high-quality instrumentation device gives student's the power to prototype systems and test circuits outside of the classroom while improving comprehension with continuous reinforcement.

     

    For all Classroom options and Quotations, please contact an Account representative for more information, and to discuss your specific needs.

     

     

    myDAQ with NI LabVIEW and Multisim - (For Students Only)

    #781327-01
    $249.97
    (In stock)
    National Instrument's NI myDAQ - Student with NI LabVIEW, and Multisim, is designed to give students the ability to work on engineering course work and experiment with projects hands-on anywhere, anytime. The NI myDAQ is a high-quality instrumentation device that gives students the power to prototype systems and test circuits outside of the classroom while improving comprehension with continuous reinforcement.  (Only for sale to students in the USA).
     
    (Special offer - optional myDAQ accessory myGRID for NI myDAQ - an AC power grid that will help you to investigate the components of a power grid, availble as a bundled purchase only, while supplies last).

    myDevBoard - Prototype Board

    #70752
    $40.48
    (401 In stock)

    The myDevBoard is an accessory board designed to connect directly to the NI myDAQ hardware. The Protoboard consists of a prototyping space as well as each I/O line from NI myDAQ broken out through quad contact blocks to make wiring easier. 

     

    Includes,

    • NI myDAQ terminal block and female headers
    • 9 V battery holder to add supplemental voltage and current
    • Includes switch to select between battery or external power using AC Adapter or bench top power supply. (Battery, AC adapter and bench top power supply not included)
    • 3 AMP Auto reset fuse
    • Segmented power rails on main bread board
    • Large ground plane underneath main bread board