Smart Robot Servo Programmer

The Studica Robotics Cobra Line Follower Array provides 4 X QRE1113 IR reflectance sensor mounted on a 9mm pitch.  Each sensor is comprised of two parts - an IR emitting LED and an IR sensitive phototransistor. When you apply power to the VCC and GND pins the IR LED inside the sensor will illuminate.

The Studica Robotics IR Range Sensor Bracket can be used to secure the IR Range Sensor to the Studica build structure.

The Studica Robotics Ultrasonic Distance Sensor Bracket is used to secure the Ultrasonic Distance Sensor to channels.

The Studica Robotics Multi-Mode Smart Servo Motor is a versatile, programmable servo perfect for robotics and STEM projects. Featuring steel gears, dual ball bearings, and modes including standard (±150°), continuous rotation, and custom angular, it delivers high torque and flexibility. Fully FTC-legal, the servo is ideal for competition, classroom or hobbyist use.

Note: This servo motor is legal for FIRST Tech Challenge (FTC) competitions.

The Studica Robotics XT30 Male to JST-VH cable is used to connect the Servo Power Block (75006) tothe FTC Power ecosystem. The cable can be used to connect the FTC Power block to Servo Power Block and the Servo Power Block to REV Control Hub.

The Multi-Mode Smart Servo 200 rotates at 200RPM. This angular programmable Servo can fill a variety of roles on your robot or project. In standard mode, it operates on a +/- 150-degree range. Using the Studica Smart Robot Servo Programmer (sold separately) the Multi-mode Smart Servo can be configured to run in continuous, standard, and custom angular mode. In continuous rotation mode, the servo will have proportional speed control based on the PWM signal that you send with your servo controller.  

The Studica Robotics FTC Power Block is a game-changer in facilitating seamless power connections for various devices throughout your FTC robot.

The Studica Robotics Linear Servo RC Actuator 140S-190N is a new linear servo motor which has a stroke of 140mm and a max force of 190N. 

Note: This actuator is legal for FIRST (FTC) competitions.

The Maverick 12V DC Gear Motor 61:1 w/Encoder from Studica Robotics is an ideal high torque motor for robotics, designed for strength to endure competitions, with 100rpm and 708 oz-in of torque.

To connect to the REV Robotics Control Hub, the Maverick Encoder Cable (#70163) is required as an Add-on.

Note: This motor is legal for FIRST (FTC) competitions.

Use it to power the Studica Smart Robot Servo Programmer or any other device requiring 6V output and a TJC8 connector. 

Specifications:

• 6V Output
• On/Off Power switch
• TJC8 connector
• Uses 4 x 1.5V AA Batteries (not included)