The Sharp IR Distance Sensor GP2Y0A21YK0F uses a beam of infrared light to reflect off an object to measure its distance.
The sensor uses triangulation of the beam of light to calculate the distance, and is able to provide consistent and reliable readings which are less sensitive to temperature variation or the object’s reflectivity. The sensor outputs an analog voltage corresponding to the distance of the object, and can easily be read using an inexpensive analog to digital converter (ADC) chip.
STP File
OnShape Model link
This Studica Robotics 1mm nylon spacer 24-pack is used to space gears, sprockets, wheels, and other parts along a 6mm D-shaft. Mix and match with various spacer lengths.
This 1mm Spacer is used to space gears, sprockets, wheels, and other parts along a 6mm D-shaft. Mix and match various spacer lengths.
· 450mm Length
· 3 position
· TJC8 MH-FC on one end
· TJC8 FH-MC on the other end
· Twisted cable
· Colors: White, Red, Black (red in middle)
· 24AWG Guage
This GT2 (also called 2GT) timing belt has a 2mm Pitch, 6mm width, and open 1000mm in length. Use any of the GT2 pulleys from Studica and the clamp kit.
Specifications:
A pack of 100 Studica Robotics M3 Nyloc Nuts for robotics design.
150mm Blue Zip Tie, 100 pack, can be used for wire management.
The Studica Robotics 100mm Flex Wheel (4"), with a 25mm axial width can be used for intake systems and conveyors with your robotics design builds.
The Studica Robotics 100mm (4") blue Flex Wheel with an axial width of 25mm and a durometer of 50A can be used for intake systems and conveyors.
A 16A, 125VAC on/off panel mount snap-in power switch for use with Studica Robotics design builds.
The Studica Robotics Ultrasonic Distance Sensor Bracket is used to secure the Ultrasonic Distance Sensor to channels.
The Studica Robotics Ultrasonic Distance Sensor provides stable, accurate and high precision distance measurements.
The Studica Robotics IR Range Sensor Bracket can be used to secure the IR Range Sensor to the Studica build structure.
The Studica Robotics Cobra Line Follower Array provides 4 X QRE1113 IR reflectance sensor mounted on a 9mm pitch. Each sensor is comprised of two parts - an IR emitting LED and an IR sensitive phototransistor. When you apply power to the VCC and GND pins the IR LED inside the sensor will illuminate.