Main Categories
    Filters
    Preferences
    Search

    Maverick DC Gear Motor 61:1 w/Encoder

    The Studica Robotics Maverick 12V DC Gear Motor 61:1 w/Encoder is an ideal motor for robotics, designed for strength to endure competitions, with 100rpm and 708 oz-in of torque.

     

    To connect to the REV Robotics Control Hub, the Maverick Encoder Cable (#70163) is required as an Add-on.

     

    Note: This motor is legal for FIRST (FTC) competitions.

    MFR Part #: 75001
    $28.99
    In stock

    Specifications:

    FunctionMinNomMax
    Input Voltage-12VDC-
    Gear Ratio-61:1-
    No Load RPM88100112
    No Load Current-600mA-
    Rated Speed688092
    Rated Current--2.2A
    Rated Torque-139 oz-in-
    Stall Current--11A
    Stall Torque708 oz-in--
    Direction-CW-
    Encoder Voltage4-5
    Encoder Current-6mA-
    Encoder CPR-6-

    Output Counts per Revolution of Output Shaft (cpr) 1,464

    Write your own review
    • Product can be reviewed only after purchasing it
    • Only registered users can write reviews
    *
    *
    • Bad
    • Excellent

    Specifications:

    FunctionMinNomMax
    Input Voltage-12VDC-
    Gear Ratio-61:1-
    No Load RPM88100112
    No Load Current-600mA-
    Rated Speed688092
    Rated Current--2.2A
    Rated Torque-139 oz-in-
    Stall Current--11A
    Stall Torque708 oz-in--
    Direction-CW-
    Encoder Voltage4-5
    Encoder Current-6mA-
    Encoder CPR-6-

    Output Counts per Revolution of Output Shaft (cpr) 1,464

    Customers who bought this item also bought

    100mm Slim Mecanum Wheel Set (Bearing Rollers, 2 left, 2 right)

    #76246
    $139.00
    (In stock)

    The Studica Robotics 100mm Slim Mecanum Wheel Set comes with 2 left and 2 right wheels with steel ball bearings, blue steel frame and black rollers.  The wheel comprised of 12 black rollers and is able to move in any direction. Rollers are set at 45° to the axis of rotation of the wheel.  Rollers are mounted with steel ball bearings, making the roll more fluent.

     

    DC Power Plug 2.1mm ID x 5.5mm OD w/1m 18AWG cable

    #70016
    $3.49
    (In stock)

    Ideal for the myRIO.

    • Inside Contact Diameter: 2.1mm
    • Outside Contact Diameter: 5.5mm
    • Termination Style: Solder Cup
    • Voltage Rating: 12 V
    • 6 Amp
    • 1 meter cord length
    • 18AWG or 20AWG wire guage
    • DC connector type

    USB Cable, Type A to Type C, Blue, 2M

    #70186-2M
    $5.99

    USB Cable, Type A to Type C, Blue, 2 Meters, male to male

    3D Depth Camera

    #71044
    $189.00
    (In stock)

    The 3D Depth Camera from Studica Robotics is an affordable replacement for the RealSense D435, it is designed to provide an accurate high-definition depth-sensing camera for mobile robotics and consumer electronic projects.

    Clamping 6mm D-Shaft Hub - v2

    #76280
    $7.99
    (In stock)

    The Studica Robotics Clamping 6mm D-Shaft Hub - v2 is used with flex and drive wheels and is improved for the absolute strongest hold.

    38mm Omni Wheel

    #76259
    $9.99
    (In stock)

    The Studica Robotics 38mm Omni Wheel was designed as an odometry wheel that can fit inside most channel sizes. For ease of use, three cores were designed to fit the 6mm D-Shaft, 5mm Hex Shaft, and 7mm Hex Shaft. The wheel is open for easy use in any ecosystem with the provided different-sized cores.

    Tamiya Male to PowerPole Adaptive Connector Cable

    #70191
    $4.99
    (In stock)

    Orbital Motor Mount

    #76138
    $6.49
    (In stock)

    The Studica Robotics Orbital Motor Mount is used to fasten an orbital motor to your model's U-channel.

    12 Tooth 5mm Pitch GT2 D-Shaft Pulley

    #76448
    $7.99
    (In stock)

    The Studica Robotics 12 Tooth 5mm Pitch GT2 D-Shaft Pulley is ideal for your robotics design builds.