Used with Maverick DC Motor with 6mm shaft and all 6mm D-Shaft Axels. Matching belt 10mm Timing Belt, # 76233.

Specifications:

• 10 Tooth Timing Pulley
• 6mm Bore 
• material: 6061 T6 Aluminum
• Step File

Belt Connector B provides a simple way to clamp open-end timing belts. Mating with some clamping parts, you can  use a open-end timing belts more flexible for example using in the belt system of the 3D printer.

Features:

• Made from 6061 aluminum extrusion, high precision and strength
• Compatible with Makeblock components

In most cases ,when you buy some timing belts on the market, it is always not the size which you want or fixing open-end timing beltsis a big problem. Makeblock Belt connector can solve the problem. Belt Connector is usually used to fix open-end timing belt(width <=8mm) together when you use timing belt to build  transmission.

Features:

• Connect open-end timing belt together easily
• Eight M4 mounting holes compatible with most Makblock components
• Aluminum extrusion(high strength) , 3mm thick, anodized surface(long time to shelve with barely rusting)

Makeblock plastic timing pulley 62T is made of plastic, which has a lighter weight. It is used as a car's wheel in DIY designs. Moreover, 12 M4 holes in it also allow to be used as the plate in Makeblock platform.

Makeblock plastic timing pulley 90T is made of plastic, which has a lighter weight. It is used as a car's wheel or can be compatible with timing pulley and TT motor in Makeblock mBot. Moreover, 24 M4 holes in it also allow to be used as the plate in Makeblock platform.

Features:

• Made from plastic.
• 90 tooth timing pulley with a step diameter of 10*7.5mm.
• Compatible with MXL Timing Belt.
• Can be used with TT Motor.
• Can also be used as a car wheel. 
• with 24 M4 holes
• Sold in Packs of 4.

Makeblock plastic timing pulley 90T without steps is made of plastic, which has a lighter weight. It is used as a car's wheel. Moreover, 24 M4 holes in it also allow to be used as the plate in Makeblock platform.

This neoprene timing belt is perfect for hobby 3D printers, camera sliders, or other linear motion systems. It is open-ended so that each end can be attached to the printer head, camera slider, etc. 
 
Makeblock has 5 different length open-end timing belt for choose. Moreover, Makeblock Timing Pulley are additionally recommended.  

• Timing Belt Standard: MXL
• Pitch: 2.032mm 
• Width: 6.6 mm
• Material: Neoprene
• Tooth Number: 123

• Timing Belt Standard: MXL
• Pitch: 2.032mm 
• Width: 6.6 mm
• Material: Neoprene
• Tooth Number: 140

• Timing Belt Standard: MXL
• Pitch: 2.032mm 
• Width: 6.6 mm
• Material: Neoprene
• Tooth Number: 216

This neoprene timing belt is perfect for hobby 3D printers, camera sliders, or other linear motion systems. It is open-ended so that each end can be attached to the printer head, camera slider, etc. 
 
Makeblock has 5 different length open-end timing belt for choose. Moreover, Makeblock Timing Pulley are additionally recommended.  

• Timing Belt Standard: MXL
• Pitch: 2.032mm 
• Width: 6.6 mm
• Material: Neoprene
• Tooth Number: 378

This neoprene timing belt is perfect for hobby 3D printers, camera sliders, or other linear motion systems. It is open-ended so that each end can be attached to the printer head, camera slider, etc. 
 
Makeblock has 5 different length open-end timing belt for choose. Moreover, Makeblock Timing Pulley are additionally recommended.

The Makeblock Timing Belt Motion Kit contains frequently-used parts in building motion mechanisms.

• Made from 6061 aluminum, anodized surface.
• 18 tooth timing pulley with a center diameter of 4mm.
• Compatible with MXL Timing Belt.
• 2 Headless Screw M3x5 included.
• Sold in Pair.

• Made from 6061 aluminum extrusion , 8mm thick, anodized surface.
• Compatible with MXL Timing Belt.
• Sold in Packs of 4.