100mm Mecanum Wheel Set Slim Design Bearing Rollers 2 left 2 right

Ideal for the myRIO.

• Inside Contact Diameter: 2.1mm
• Outside Contact Diameter: 5.5mm
• Termination Style: Solder Cup
• Voltage Rating: 12 V
• 6 Amp
• 1 meter cord length
• 18AWG or 20AWG wire guage
• DC connector type

USB Cable, Type A to Type C, Blue, 2 Meters, male to male

The 3D Depth Camera from Studica Robotics is an affordable replacement for the RealSense D435, it is designed to provide an accurate high-definition depth-sensing camera for mobile robotics and consumer electronic projects.

The Maverick 12V DC Gear Motor 61:1 w/Encoder from Studica Robotics is an ideal high torque motor for robotics, designed for strength to endure competitions, with 100rpm and 708 oz-in of torque.

To connect to the REV Robotics Control Hub, the Maverick Encoder Cable (#70163) is required as an Add-on.

Note: This motor is legal for FIRST (FTC) competitions.

The Studica Robotics 38mm Omni Wheel was designed as an odometry wheel that can fit inside most channel sizes. For ease of use, three cores were designed to fit the 6mm D-Shaft, 5mm Hex Shaft, and 7mm Hex Shaft. The wheel is open for easy use in any ecosystem with the provided different-sized cores.

M3 x 25mm Socket Head Cap Screw (pack of 100), Zinc Plated.  Can be used with our M3 Stainless Steel Split Washers for an ideal fit.

The Intake Hub Kit D-Shaft from Studica Robotics is engineered for building reliable and effective intake systems, especially in competitive robotics environments like FTC (FIRST Tech Challenge) and WRO (World Robotics Olympiad). Crafted from high-strength 6061-T6 aluminum, this hub supports a 6-pin, 6-M6 tapped-hole design to securely mount silicone tubing, wheels, or rollers—even under high load. 

The hub can be used with the Silicone Rubber Tubing #76410 (sold separately).

The Studica Robotics D-Shaft Coupling has an ID of 6mm and an OD of 12mm.  It can be used with the 6mm D-Shaft Axle and a 6mm shaft DC motor.