Makeblock
Makeblock | Robotic Components for Makers Everywhere
Join the Makerspace revolution! Studica offers makers, students, educators, and hobbyists the versatile Makeblock kits and components they need. Makeblock is an open-source construction platform ready to help you make your ideas reality! Don't be intimidated by technology. The Makeblock catalog offers makers of every experience level robotic and electronic solutions that are accessible and easy to use. Developed based on competitive standards, Makeblock components meet the requirements for many FIRST projects and other robotic competition events.
Makeblock Countersunk Screw M3 x 8 - Pack of 10
Countersunk Screw M3 x 8
Makeblock Cuttable Linkage 080 - Blue - 10 Pack
Makeblock Cuttable Linkage 080 is used as the link parts in DIY designs, such as 3D printer, link structure and other structures in Makeblock.
Features:
- Made from 6061 aluminum, 2mm thick, anodized surface.
- With holes on 8mm increments, can be drilled for 4mm hardware.
- Can be cut into short size as you like.
- Sold in Packs of 10.
Makeblock D Shaft 4x128mm - 4-Pack
D Shaft 4×128mm is usually used as a shaft by mating with a gear, pulley, a shaft coupler or some bearings. Made from stainless steel material, it is very hard and has a flat edge.
Makeblock D Shaft 4x160mm - 4-Pack
D Shaft 4x160mm is a durable maker component. This product is available in a 4-pack, which contains four D shaft parts with a 160 mm length.
Makeblock D Shaft 4x56mm - 4-Pack
D Shaft 4x56mm is a durable maker component. This product is available in a 4-pack, which contains four D shaft parts with a 56 mm length.
Makeblock DC Motor-37 12V/50RPM -
DC motors are the most commonly used motors in Makeblock Platform. With Makeblock DC Motor-25 Brackets, they may be easy to connet to Makeblock structural components.
Makeblock DC Motor-37 Bracket - Blue (Pair)
Makeblock DC Motor-37 Bracket is an easy to use fastener for a DC Motor. These specially designed brackets help attach the motor to your maker project. They are compatible with a 37mm DC motor and most Makeblock components.
Makeblock Double Acting Mini Cylinder Pack MI10X60CA
Makeblock F688ZZ 8x16x5 Flange Bearing - 4-Pack
8x16x5 flange bearing can operate with 8mm of shaft. It can be mounted to the part of 16mm hole, e.g. U-shaped rack C.
Makeblock Flexible Coupling 4x4mm
This is the single spiral groove of flexible coupling made by aluminum. This design utilizes a single piece of material and becomes flexible by removal of material along a spiral path resulting in a curved flexible beam of helical shape.Changes to the lead of the helical beam provide changes to misalignment capabilities as well as other performance characteristics such as torque capacity and torsional stiffness. It is even possible to have multiple starts within the same helix.
Makeblock Gear 16T-Blue
Gear 16T is designed for transmitting motion from a motor to another gear or shaft. You can use a headless screw M3x5 to attach it.
Makeblock Gear 80T-Blue
Gear 80T is designed for transmitting motion from a motor to a wheel or shaft. Usually it is used with shaft connector or flange bearing 4*8*3.
Makeblock Hardware Pack - Stainless Steel Screws
Makeblock Injection Omnidirectional Wheel - Pair
Makeblock injection omnidirectional wheel is made of steel ball and plastic bracket, the wheel turns freely and flexibly.
It can be compatible with Makeblock mBot or other three-wheeled robot car.
Features:
- ? Simple structure for better operation.
- ? Build mBot or a three-wheeled robot car.
Makeblock Inventor Electronic Kit
Makeblock Inventor Electronic Kit is a module electronic platform, developed for quick prototyping. This kit includes twelve sensors and actuators, each with a color-coded connector to help simply wiring. Each module is equipped with the Arduino library for quick programming. These electronics are compatible with Arduino programming, as well as MIT Scratch and Ardublock. These alternatives are great for teaching kids how to program and interact with hardware. For additional control functionality, makers can easily attach the Bluetooth module (2.0 or 4.0) and download the Makeblock app. By doing this, you can instantly turn your project into a smart device and control it via your smartphone or tablet.
Makeblock LED RGB Strip-Addressable, Sealed - 1M
Makeblock Linear Motion Guide Rail 496mm - Single Pack
Linear motion guides permit directional movement of a carriage along their length. It will be used in connect with Linear Motion Block.
Makeblock linear motion guide can be use in high-precision linear motion applications, such as 3D Printer,computer numerical control (CNC) equipment or other linear motion systems.
Features:
- • Steel material and stiffness
- • With holes on 48mm increments that can be installed with M4 screw
- • High accuracy and ability to work at high speed for long periods with total reliability
Makeblock Linear Motion Shaft 4x288mm - 4-Pack
Features:
- Made of tainless Steel
- Can drill into 4mm holes. Compatible with Thread Drive Beam
- Lengh: 288mm
- Sold in 4-Pack
Makeblock Linear Motion Shaft D4x240mm
Features:
- Made of tainless steel.
- Can drill into 4mm holes.
- Compatible with thread drive beam.
- Lengh: 240mm
Makeblock Linear Motion Shaft D8*128mm-H
This shaft of 8 mm in diameter and 128mm in length is suitable for using as shaft, supporting part, or using with slide units in linear motion applications. It is made from high-carbon steel and chrome plated for corrosion resistance, case hardened for wear resistance.
Features:
- With M4 thread holes on both ends
- Round steel shaft for using as shaft, supporting part, or using with slide units in linear motion applications
- Chrome plated for corrosion resistance
- Case hardened for wear resistance
Makeblock Linear Motion Shaft D8x128mm
This linear motion shaft of 8 mm in diameter and 128mm in length is suitable for using as shaft, supporting part or using with slide units in linear motion applications. It is made from high-carbon steel and chrome plated for corrosion resistance, case hardened for wear resistance and precision ground for consistent ball bushing radial clearance.
Features:
- Round steel shaft for using as shaft, supporting part or using with slide units in linear motion applications
- Chrome plated for corrosion resistance
- Case hardened for wear resistance
Makeblock Linear Motion Shaft D8x272mm
This shaft of 8 mm in diameter and 272mm in length is suitable for using as shaft, supporting part, or using with slide units in linear motion applications. It is made from high-carbon steel and chrome plated for corrosion resistance, case hardened for wear resistance.
Features:
- With M4 thread holes on both ends
- Round steel shaft for using as shaft, supporting part, or using with slide units in linear motion applications
- Chrome plated for corrosion resistance
- Case hardened for wear resistance
Makeblock Linear Motion Shaft D8x496mm
This linear motion shaft of 8 mm in diameter and 496 mm in length is chrome plated and case hardened, and is suitable for use with slide units in linear motion applications. The high-carbon steel shaft is chrome plated for corrosion resistance, case hardened for wear resistance, and precision ground for consistent ball bushing radial clearance.
Features:
- Round steel shaft for use with slide units in linear motion applications.
- Chrome plated for corrosion resistance
- Case hardened for wear resistance
- Precision ground for consistent ball bushing radial clearance
Makeblock Linear Motion Shaft D8x96mm
This linear motion shaft of 8 mm in diameter and 96mm in length is suitable for using as shaft or supporting part. It is made from high-carbon steel and chrome plated for corrosion resistance, case hardened for wear resistance.
Features:
- Round steel shaft for using as shaft or supporting part
- Chrome plated for corrosion resistance
- Case hardened for wear resistance
Makeblock Linear Motion Slide Unit 8mm - Pair
This linear motion closed type slide unit has an 8 mm inside diameter and is suitable for use in precision linear motion applications, such as in printing machines and computer numerical control (CNC) equipment. The slide unit, designed to carry a component, has a housing with a flat mounting face and four tapped bolt holes, and circle clips at each end to retain the ball bushing. Ball in the cage loop to run a smooth ball guide surface to ensure even if high-speed operation, low noise.
Makeblock Linkage-024-Blue - 10-Pack
- Made from 6061 aluminum, 2mm thick, anodized surface.
- With holes on 8mm increments, can be drilled for 4mm hardware.
- Sold in pack of 10.
Makeblock M4 Plain Washer - 10-Pack
M4 plain washer is generally used together with with M4 bolts and nuts to reduce the pressure intencity and protect the beam surface.
Specifications:
- Type: Plain Washer
- Material: Steel
- Thickness: 0.4 mm
- Outer diameter: 9.0 mm
- Inner diameter: 4.2 mm
Makeblock M8 Elastic Washer - 10-Pack
M8 elastic washer is generally used together with with M8 bolts, which will not get loose in vibrating.
Specifications:
- Type: Elastic Washer
- Material: Steel
- Thickness: 2.2 mm
- Outer diameter: 12.7 mm
- Inner diameter: 8.3 mm
Makeblock M8 Plain Washer - 10-Pack
M8 plain washer is generally used together with with M8 bolts and nuts to reduce the pressure intencity and protect the beam surface.
Specifications:
- Type: Plain Washer
- Material: Steel
- Thickness: 1.5 mm
- Outer diameter: 15.7 mm
- Inner diameter: 8.4 mm
Makeblock Male Rod End Bearing 4mm - (3-Pack)
A rod end bearing, also known as a heim joint (N. America) or rose joint (U.K. and elsewhere), is a mechanical articulating joint. Such joints are used on the ends of control rods, steering links, tie rods, or anywhere a precision articulating joint is required. A ball swivel with an opening through which a bolt or other attaching hardware may pass is pressed into a circular casing with a threaded shaft attached.
Makeblock mBot V1.1 (2.4GHz Version) - Blue
Makeblock mBot V1.1 is the latest all-in-one solution for teaching young students about programming, electronics and robotics. The improved mBot V1.1 kit provides new ways for children to learn about science, technology, engineering and math (STEM). It is compatible with Scratch 2.0 programming and controlled with Bluetooth or a 2.4GHz wireless module. The new mBot design comes with a casing specially designed for protecting main control board. The casing is also atomized to safeguard children's eyes from the glare of the onboard LED. Additional new features also include auxiliary wheels, improved button configuration, and a lithium battery holder. Let your young learners can experiment with different programming activities, like playing soccer, line-following, obstacle courses and more
Makeblock mBot V1.1 (2.4GHz Version) - Pink
Makeblock mBot V1.1 is the latest all-in-one solution for teaching young students about programming, electronics and robotics. The improved mBot V1.1 kit provides new ways for children to learn about science, technology, engineering and math (STEM). It is compatible with Scratch 2.0 programming and controlled with Bluetooth or a 2.4GHz wireless module. The new mBot design comes with a casing specially designed for protecting main control board. The casing is also atomized to safeguard children's eyes from the glare of the onboard LED. Additional new features also include auxiliary wheels, improved button configuration, and a lithium battery holder. Let your young learners can experiment with different programming activities, like playing soccer, line-following, obstacle courses and more
Makeblock mBot-S Educational Explorer Kit.
Makeblock mBot-S Educational Explorer Kit is the latest all-in-one solution for teaching young students about programming, electronics and robotics. The improved mBot kit provides new ways for children to learn about science, technology, engineering and math (STEM). It is compatible with Scratch 2.0 programming and controlled with Bluetooth and includes the LED Matrix. The new mBot design comes with a casing specially designed for protecting main control board. The casing is also atomized to safeguard children's eyes from the glare of the onboard LED. Additional new features also include auxiliary wheels, improved button configuration, and a lithium battery holder. Let your young learners can experiment with different programming activities, like playing soccer, line-following, obstacle courses and more
Makeblock Me 130 DC Motor Pack
Me 130 DC Motor Pack is a funny package that comes with a 130g DC motor with circuit board for easy-using and protecting the motor, four nylon studs for support, and a mini fan. You can put it all together to build a electric fan, kids would love it And by adding some other Makeblock components, you can build funny projects such as cooling machine, smart fan, bluetooth control, bubble machine.
Makeblock Me 4 Button
The Makeblock Me 4 Button can be used in a variety of projects. The Me 4 Button can work as function button or direction button to control your robots. There are 4 momentary buttons on the PCB board which have a great “click” to them. They all share an analog output and different analog values reflect different buttons. You can easily connect it to Me BaseBoard V1.0 or Me BaseShield V2.0 by 6 Pin RJ25 cable.
Makeblock Me Angular Sensor
Being connected with other Makeblock parts, Me Angular Sensor is designed to achieve the goal of detecting the angle value of a link mechanism or the angle value of a joint.
Features
• Compatible with mechanical parts of Makeblock;
• Equipped with high-precision trimmer potentiometer which has good linearity for long-time use;
• Small in size, with wires included for easy assembling;
• No need to burn program into this angular sensor.
How Does It Work?
With the wires included in this pack, you are able to connect the Me Angular Sensor to Makeblock RJ25 Adapter or ZeroPi. Just by interacting with the main control board—Me Orion, it provide an easy way to detect the angle value of the link mechanism or the angle value of the joint you apply.
Note
This Me Angular Sensor need to be connected thru Me RJ25 Adapter.
Makeblock Me Compass
The Makeblock Me Compass is a 3-axis digital compass. The main chip is Honeywell HMC5883L. On-board regulator provides stable power for HMC5883L.
Makeblock Me Infrared Receiver Decode
The Makeblock Me Infrared Receiver Decode module is designed for receiving infrared signals and controlling the robotics from the infrared remote control. The Infrared Receiver Decode can receive signals well within 10 meters. It may be unable to obtain signal from further than 10 meters. The Makeblock Me Infrared Receiver Decode is simple to wire, easy to program, the controller is compatible with Arduino.
Makeblock Me PIR Motion Sensor
The Makeblock Me PIR sensors are used to detect motion from animals/ humans from about 6m away. If anything moved in that range, the sensor outputs HIGH on its SIG pin. With a potentiometer soldered on its circuit board, you can adjust its detecting range according to your need. Some great DIY project ideas include: motion detecting, thief-guarding system, automation switch.
Makeblock Me Potentiometer
The Makeblock ME dial type potentiometer has a knob which can be rotated up to 270 degrees. It can convert rotary motion to an analog input which can be used to control the speed of a mobile robot, the brightness of RGB LEDs, or others.
Makeblock Me RGB LED
The Makeblock Me RGB LED V1 is a shiny Me series module which has 4 full color ws2812 RGB LEDs. It has an integrated chip giving you control of each LED individually to adjust its brightness and create any color by mixing different amounts of red, green, blue.
Makeblock Me Shutter
The Makeblock Me Shutter V1.0 is a Me series module used to automatically take pictures with your DSLR camera. It helps you shoot high speed photos, or use it to make ”Timelapse” videos and pictures for an Arduino project.
Makeblock Me Slide Potentiometer
Me Slide Potentiometer is one type of potentiometer that can be used to control volume, light intensity, motor speed, movement control, etc. in interactive projects.
Features
• Compatible with the Arduino sensor expansion board;
• Three 4mm mounting holes and one RJ25 port for easy assembling;
• With one red power indicator and one blue potentiometer indicator;
• Anti-reverse connection protection feature.
How Does It Work?
This Me Slide Potentiometer can be combined with Me Orion (or other Arduino IO/sensor expansion board) in interactive projects. Move the lever from one side to the other, its output voltage will range between 0 V to the VCC you apply. The VCC Me Slide Potentiometer supports vary from 3.3V to 5V.
Note
If you connect this module to Me Orion, please make sure you connect it to port 6, port 7 or port 8.
Makeblock Me Stepper Motor Driver
The Me Stepper Driver V1.0 is a easy to use stepper motor driver board based on chip A4988, generally used to drive bipolar stepper motors precisely. It is perfect for 3D printing, CNC, Makeblock Music Robot as well as a lot of other applications where it's necessary to control precise movement.
The A4988 is a complete microstepping motor driver with built-in translator for easy operation. It is designed to operate bipolar stepper motors in full-, half-, quarter-, eighth-, and sixteenth-step modes. Plus, we add a on-board DIP Switch and a on-board potentimeter, so you can change step modes and the current of motor easily.
Makeblock Me Temperature and Humidity Sensor
The Makeblock Me Temperature and Humidity Sensor contains a calibrated digital signal output. It adopts specific digital module collecting technology and temperature-humidity sensing technology to ensure high reliability and excellent long-term stability. This Makeblock sensor can measure the temperature from 0? to 50?. Users can use it to build a cost-effective temperature and humidity monitoring system. Its yellow ID means that it has a single-digital port and needs to be connected to the port with yellow ID on Makeblock Orion.