Explore a variety of structure components and robot parts from Studica Robotics.
The Studica Robotics 135 Degree Bracket (2-pack) is ideal for connecting two channels pieces at 45 degrees from each other. Each side is 48mm wide to fit perfectly on the channel.
The Studica Robotics 192mm Low Profile U Channel is 3mm thick and has a 48mm x 14mm profile. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.
The Studica Robotics Flat Beam is 3mm thick and 8mm wide, with a length of 240mm.
The Studica Robotics 240mm L-Beam (2-pack) has a width and height of 14mm each. It is strong while light-weight. It can be easily cut to your own custom size. The hole pattern matches the hole patterns in the Studica U-Channel, Low Profile U-Channel, and the various plates. Ideal for rapid prototyping.
The Studica Robotics 240mm Square Beam is 8mm by 8mm. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required.
The Studica Robotics 240mm U-Channel is 3mm thick and has a 48mm x 48mm profile. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required.
The Studica Robotics 240mm Flat Bracket is 3mm x 40mm wide, and very strong. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required.
The Studica T-Slot Extrusion is available in 10 different lengths from 48mm to 1000mm. It is strong while light weight. It can be easily cut to your own custom size. It has a 14mm through hole that will fit the Studica 6mm ID x 14mm OD Flanged Bearing or Bronze Bushing. It uses the M3 T-Slot Nut Hammer Head Series 20. It also has four M3 threaded holes on each end. Use it as structure on infinite applications.
The Studica Robotics 6mm diameter D-Shaft is made of stainless steel and is used throughout our building system as drive components. The D-Shaft profile is used with pulleys, gears and hubs when tightening the set screws and creating a non-slip connection.
The Studica Robotics Motor Mount Clamp kit is used for fastening motors on the body of your robot and attaching the kit to a channel and/or other structures.
This 1mm Spacer is used to space gears, sprockets, wheels, and other parts along a 6mm shaft. Mix and match various spacer lengths.
SPECIFICATIONS
The Studica Robotics 192 mm L-Beam (2-pack) has a width and height of 14mm each. It is strong while light-weight. It can be easily cut to your own custom size. The hole pattern matches the hole patterns in the Studica U-Channel, Low Profile U-Channel, and the various plates. Ideal for rapid prototyping.
The Studica Robotics 192mm Square Beam is 8mm by 8mm. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems. Ideal for rapid prototyping.
The Studica Robotics 192mm Flat Bracket has dimensions of 3mm thickness x 40mm width. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.
The Studica Robotics 240mm Low Profile U-Channel is 3mm thick and has a 48mm x 14mm profile. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.
The Studica Robotics T-Slot Extrusion is available in 10 different lengths from 48mm to 1000mm. It is strong, while light-weight. It can be easily cut to your own custom size. It has a 14mm through hole that will fit the Studica 6mm ID x 14mm OD Flanged Bearing or Bronze Bushing It uses the M3 T-Slot Nut Hammer Head Series 20. It also has four M3 threaded holes on each end. Can be used as structure with infinite applications.