The Studica Robotics 110mm All-Terrain Rubber Wheel Tire includes a 6mm adapter. It has a foam core and therefore does not require air.
The Studica Robotics 125mm All-Terrain Robotics Wheel Set includes two left and two right rubber wheels. They have a foam core and therefore do not require air.
The Studica Robotics 6mm x 432mm D-Shaft is made of stainless steel and is used throughout our building system as drive components. The D-Shaft profile is used with pulleys, gears and hubs when tightening the set screws and creating a non-slip connection.
The Studica Robotics D-Shaft Collar is 6mm ID and 12mm OD. The inside diameter will fit any of the D-Shaft axles.
The Studica Robotics Motor Mount Clamp kit is used for fastening motors on the body of your robot and attaching the kit to a channel and/or other structures.
This 1mm Spacer is used to space gears, sprockets, wheels, and other parts along a 6mm D-shaft. Mix and match various spacer lengths.
This GT2 (also called 2GT) timing belt has a 2mm Pitch and 6mm width.
Specifications:
The Studica Robotics All-Terrain Pack includes all-terrain tires, shock absorbers, D-shafts, flange bearings and shaft spacers, ideal for your robotics designs.
The Studica Robotics 100mm (4 inch) Omni Wheel provides rotational and sideways 360° maneuverability. Great for omni directional movement and rotation, easy direction control and tracking, and for fast turning. Use the Enhanced Wheel D-Shaft Hub Kit with this Omni Wheel.
The Studica Robotics 100mm Drive Wheel (4"), with a 12.5mm axial width can be used as a simple wheel providing good traction on carpet and tile flooring. They can also be used for intake systems. Use with 1/2" hex shaft or use a 6mm Shaft Hub to connect to 6mm D-Shaft axles.
The Studica Robotics 100mm Drive Wheel (4") with an axial width of 25mm, can be used as a simple wheel providing good traction on carpet and tile flooring. They can also be used for intake systems. Use with 1/2" Hex Shaft or 6mm Shaft Hub to use connect 6mm D-Shaft Axles.
The Studica Robotics 100mm Flex Wheel (4"), with a 25mm axial width can be used for intake systems and conveyors with your robotics design builds.
The Studica Robotics 100mm (4") orange Flex Wheel with an axial width of 25mm and a durometer of 40A can be used for intake systems and conveyors.
The Studica Robotics 100mm (4") blue Flex Wheel with an axial width of 25mm and a durometer of 50A can be used for intake systems and conveyors.
The Studica Robotics 100mm (4") black Flex Wheel with an axial width of 25mm and a durometer of 60A can be used for intake systems and conveyors.
The Studica Robotics 50mm (2") green Drive Wheel with a durometer of 35A can be used as a simple wheel providing good traction on carpet and tile flooring. The drive wheel can also be used for intake systems and with 1/2" hex shafts or 6mm Shaft Hubs to connect 6mm D-Shaft Axles.
The Studica Robotics 50mm (2") orange Drive Wheel with a durometer of 40A can be used as a simple wheel providing good traction on carpet and tile flooring. The drive wheel can also be used for intake systems and with 1/2" hex shafts or 6mm Shaft Hubs to connect 6mm D-Shaft Axles.
The 50mm (2") Studica Robotics black Drive Wheel with a durometer of 60A can be used as a simple wheel providing good traction on carpet and tile flooring. They can also be used for intake systems. For use with the 1/2" hex shaft or 6mm Shaft Hub to connect to 6mm D-Shaft Axles.
The Studica Robotics 50mm (2") blue Drive Wheel with a durometer of 50A can be used as a simple wheel providing good traction on carpet and tile flooring. They can also be used for intake systems.
The Studica Robotics 75mm black Drive Wheel with a durometer of 60A can be used as a simple wheel providing good traction on carpet and tile flooring. They can also be used for intake systems. Use with the 1/2" hex shaft or 6mm Shaft Hub to use connect 6mm D-Shaft Axles.
