Main Categories
    Filters
    Preferences
    Search

    WorldSkills Mobile Robotics Junior Collection

    The WorldSkills Mobile Robotics Junior Collection by Studica Robotics is the authorized robotics collection kit for the WorldSkills Mobile Robotics Junior Competition. This comprehensive Collection includes over 1,400 items including robot controllers, electronics, motors, mechanical structures, robot motors and gears, various belts, pulleys, sprockets, axles, slides, rack & pinion assemblies, robot wheels, bushings, bearings, couplings, collars, spacers, screws, nuts, and standoffs. 

     

    Download brochure and BOM

    MFR Part #: 70302
    Request Quote
    Availability: In stock

    Structure:

    • Channel:
      • Two types are available: U Series Channel and Low Profile Series Channel
      • Enhanced Pattern allows for easy connecting of structure, gears, sprockets, and motors
      • Larger Centre Hole to allow for bearings and for rotating components to pass-through
      • All mounting holes fit new metric M3 Hardware.
    • Flat Beams: Beams are on the compact side of the structural elements with a simple to use 8mm linear pattern. They are also easy to bend for customization.
    • Flats: The plates have the Studica pattern down the length of the plate. Use them to add support, as a bracket to attach something to, or as a trim panel to get just the right look for your build.
    • Brackets: New brackets with faces on more than one plane.  Many of the brackets allow you to build off from your main structure at an angle.  Others have a more specialized common uses such as to hold a trailing wheel or drive-wheel for a mobile chassis.
    • Mounts: These are cornerstone pieces to the major framework of your project. Mounts allow you to create solid junctions, add support, and open up mounting possibilities.
      • Motor Mount Plate
      • Updated Servo Mounts
      • Updated Motor Mounts
    • Gears, Chains, and Sprockets: Updated straight-cut spur gears have a 14 mm bore with the Studica pattern in order to mount to hubs and other rotating components. New bevel gears for gearbox design and enhanced drive system design.

    Motion:

    • Motors:
      • DC Gear Motor: The Maverick Series Planetary Gear Motors offer efficient and robust power for the robot. M3 mounting holes on the Studica pattern offer a new and quick and convenient way to integrate with other components. The 6mm D-shaft, 61:1 Gearbox, and 470mm long power wires combined with the Powerpole connectors offer a high quality, high current connection in a compact motor.
      • Servo Motor : The Studica Robotics servo is updated with new features including an ultra stout steel gear train, more torque and a new top case This angular programmable Servo can fill a variety of roles on your robot or project. In the default mode, the servo can rotate 300 degrees while having positioning feedback. In this mode, the PWM signal will determine the position of the servo. Using the Servo Programmer the servo can be toggled into continuous rotation mode. In this mode, the servo will have proportional speed control based on the PWM signal that you send with your servo controller.
    • Wheels:
      • Omni Wheels: Our new Dual Omni wheels are single piece with enhanced have rubber rollers around the perimeter, perpendicular to the drive-direction so your robot chassis can move laterally with ease. Each steel sleeved roller rides on a polished steel axle in order to minimize friction. This new design means that as the wheels rotate the load is transferred seamlessly from one roller to the next.

    Electronics and Control System:

    • VMX: The powerful robot controller:
      Supports Java and C++, future support for ROS
      • The VMX integrates the navX-Sensor and via the Linux based controller, it has much more memory, processing power, Gigabit Ethernet, USB3 ports and built-in Wifi/Bluetooth.
      • Supports Open CV, Tensor Flow, SLAM (Simultaneous Localization and Mapping )
    • The Studica VMX leverages five recent key technology developments:
      • Highly-integrated, inexpensive, WiFi-enabled, multi-core Linux computing platform with lots of USB IO for expansion
      • 32-bit ARM Microcontrollers incorporating sophisticated I/O and digital communications engines
      • Low-cost MEMs Inertial Measurement Units (IMUs)
      • Powerful software providing rich libraries and tools for developing robot software in C++, Java
      • CAN bus for high-speed, real-time communication between devices
    • Titan:
      A powerful, 4-channel CAN-based motor controller with built-in fuse-box (for DC motors up to 20A)
      • 4 x Hardware encoder ports – one for each motor
      • 2 limit switch ports for each motor
      • Fuse box to set manual current limits
      • 2x Power extension ports to power other 12VDC devices. I.E.
        • VMX
        • Servo Power Module
      • Built in LED Controller
      • 6A power supply for LED's
      • i2c communication port to control LED Controller
      • USB ports are updated to USB-C to better support todays cable standards
    • Servo Power Block:
      • Power up to 8 Servo Motors

    Programming Tools:

    • Supported:
      • Visual Studio Code is the supported development editor for C++ and Java, these are the supported languages used for programming a 2021 robot. Visual Studio Code is a free source-code editor made by Microsoft for Windows, Linux and macOS. Features include support for debugging, syntax highlighting, intelligent code completion, snippets, code refactoring, and embedded
      • Free license use of the WPI Robotics library (WPILib) - a set of classes that interface to the hardware, the control system and your robot. 
      • Libraries and Tools for developing lower-level Raspberry Pi-based robot applications.
    • Non Supported but available:
      • LabVIEW
      • Python 
      • The VMX- ROS Node is currently under development

    Optional Accessories:

    • Mecanum Wheels:
      • The Standard Studica mecanum wheels are packed full of conveniences you won’t find in other brands.  The blue anodized aluminum side plates sandwich a beefy plastic wheel-center. The wheel-center has an interchangeable hub, his makes it easy to mount to a standard shaft  or other component of your choice.   This set contains two Left Slant Mecanum Wheels and two Right Slant Mecanum Wheels. 
      • An enhanced option is available where wheel has rollers which are supported by ball-bearings so that they rotate with ease.
    • Aluminum Extrusion
    • Motion Assemblies
    • All Terrain Tires
    • Tools
    Write your own review
    • Product can be reviewed only after purchasing it
    • Only registered users can write reviews
    *
    *
    • Bad
    • Excellent

    Structure:

    • Channel:
      • Two types are available: U Series Channel and Low Profile Series Channel
      • Enhanced Pattern allows for easy connecting of structure, gears, sprockets, and motors
      • Larger Centre Hole to allow for bearings and for rotating components to pass-through
      • All mounting holes fit new metric M3 Hardware.
    • Flat Beams: Beams are on the compact side of the structural elements with a simple to use 8mm linear pattern. They are also easy to bend for customization.
    • Flats: The plates have the Studica pattern down the length of the plate. Use them to add support, as a bracket to attach something to, or as a trim panel to get just the right look for your build.
    • Brackets: New brackets with faces on more than one plane.  Many of the brackets allow you to build off from your main structure at an angle.  Others have a more specialized common uses such as to hold a trailing wheel or drive-wheel for a mobile chassis.
    • Mounts: These are cornerstone pieces to the major framework of your project. Mounts allow you to create solid junctions, add support, and open up mounting possibilities.
      • Motor Mount Plate
      • Updated Servo Mounts
      • Updated Motor Mounts
    • Gears, Chains, and Sprockets: Updated straight-cut spur gears have a 14 mm bore with the Studica pattern in order to mount to hubs and other rotating components. New bevel gears for gearbox design and enhanced drive system design.

    Motion:

    • Motors:
      • DC Gear Motor: The Maverick Series Planetary Gear Motors offer efficient and robust power for the robot. M3 mounting holes on the Studica pattern offer a new and quick and convenient way to integrate with other components. The 6mm D-shaft, 61:1 Gearbox, and 470mm long power wires combined with the Powerpole connectors offer a high quality, high current connection in a compact motor.
      • Servo Motor : The Studica Robotics servo is updated with new features including an ultra stout steel gear train, more torque and a new top case This angular programmable Servo can fill a variety of roles on your robot or project. In the default mode, the servo can rotate 300 degrees while having positioning feedback. In this mode, the PWM signal will determine the position of the servo. Using the Servo Programmer the servo can be toggled into continuous rotation mode. In this mode, the servo will have proportional speed control based on the PWM signal that you send with your servo controller.
    • Wheels:
      • Omni Wheels: Our new Dual Omni wheels are single piece with enhanced have rubber rollers around the perimeter, perpendicular to the drive-direction so your robot chassis can move laterally with ease. Each steel sleeved roller rides on a polished steel axle in order to minimize friction. This new design means that as the wheels rotate the load is transferred seamlessly from one roller to the next.

    Electronics and Control System:

    • VMX: The powerful robot controller:
      Supports Java and C++, future support for ROS
      • The VMX integrates the navX-Sensor and via the Linux based controller, it has much more memory, processing power, Gigabit Ethernet, USB3 ports and built-in Wifi/Bluetooth.
      • Supports Open CV, Tensor Flow, SLAM (Simultaneous Localization and Mapping )
    • The Studica VMX leverages five recent key technology developments:
      • Highly-integrated, inexpensive, WiFi-enabled, multi-core Linux computing platform with lots of USB IO for expansion
      • 32-bit ARM Microcontrollers incorporating sophisticated I/O and digital communications engines
      • Low-cost MEMs Inertial Measurement Units (IMUs)
      • Powerful software providing rich libraries and tools for developing robot software in C++, Java
      • CAN bus for high-speed, real-time communication between devices
    • Titan:
      A powerful, 4-channel CAN-based motor controller with built-in fuse-box (for DC motors up to 20A)
      • 4 x Hardware encoder ports – one for each motor
      • 2 limit switch ports for each motor
      • Fuse box to set manual current limits
      • 2x Power extension ports to power other 12VDC devices. I.E.
        • VMX
        • Servo Power Module
      • Built in LED Controller
      • 6A power supply for LED's
      • i2c communication port to control LED Controller
      • USB ports are updated to USB-C to better support todays cable standards
    • Servo Power Block:
      • Power up to 8 Servo Motors

    Programming Tools:

    • Supported:
      • Visual Studio Code is the supported development editor for C++ and Java, these are the supported languages used for programming a 2021 robot. Visual Studio Code is a free source-code editor made by Microsoft for Windows, Linux and macOS. Features include support for debugging, syntax highlighting, intelligent code completion, snippets, code refactoring, and embedded
      • Free license use of the WPI Robotics library (WPILib) - a set of classes that interface to the hardware, the control system and your robot. 
      • Libraries and Tools for developing lower-level Raspberry Pi-based robot applications.
    • Non Supported but available:
      • LabVIEW
      • Python 
      • The VMX- ROS Node is currently under development

    Optional Accessories:

    • Mecanum Wheels:
      • The Standard Studica mecanum wheels are packed full of conveniences you won’t find in other brands.  The blue anodized aluminum side plates sandwich a beefy plastic wheel-center. The wheel-center has an interchangeable hub, his makes it easy to mount to a standard shaft  or other component of your choice.   This set contains two Left Slant Mecanum Wheels and two Right Slant Mecanum Wheels. 
      • An enhanced option is available where wheel has rollers which are supported by ball-bearings so that they rotate with ease.
    • Aluminum Extrusion
    • Motion Assemblies
    • All Terrain Tires
    • Tools
    Customers who bought this item also bought

    Robotics Sensor & Motor Training Kit

    #72030
    $499.00
    ( 43 In stock)

    Learn How to Control Motors, Sensors & Actuators with LabVIEW & NI myRIO.

     

    The Robotics Sensor & Motor Training Kit from Studica Robotics is an affordable turnkey solution that allows you to teach your students how to control sensors and motors using LabVIEW and NI myRIO. It includes two project boards, one with different motors and the other board with most of the standard robotics sensors.

     

    (NI myRIO, LabView and computer are not included).

    Classroom Robotics Kit

    #70405
    $1599.00
    ( 1 In stock)

    The Classroom Robotics Kit from Studica Robotics includes many parts for building a robot for the classroom and competitions. This kit is ideal for schools wanting to replicate an FTC-style kit and includes structure, controller, and electronics.

    Special volume discount pricing is available for U.S. schools.  Contact us at [email protected] for more information.

    Download the components list for this kit here.

     

     

     

    VMX FRC-compatible Training Bot

    #74000
    $1299.00

    The Studica VMX FRC-compatible Training Bot (FRC Trainer) is a smaller, sturdy, lightweight, and less expensive robot than your typical FRC robot. If you have a large FRC team, often only a handful of students get to learn how to create and program your team’s costly competition robot.  The FRC Trainer solves this problem and is ideal for groups of two to three to participate in hands-on learning in a classroom environment.  Schools can equip their labs with multiple FRC Trainers, benefiting from the great value and compact size. Students can even take it home with them! 

     

    This affordable solution is intended for:

    • FRC teams that want to learn and train on a smaller and more affordable robot,
    • Schools looking for a way to teach FRC robotics in the classroom.
    • Schools that want to teach coding in the classroom through robotics.

    The FRC-compatible Trainer is an intelligent and autonomous robot that uses the VMX Robotics Controller which can be programmed in C++ and Java.  VMX’s multitude of modern digital communications interfaces and Linux-based operating system allow users to directly access most modern devices (e.g., Intel RealSense tracking and depth cameras and LIDAR).


    VMX-Pi Key Use Cases and Hardware/Software Features and Benefits
    VMI-Pi Key Use Case Document is available here

    Studica accepts Purchase Orders from Schools and established companies, offering net 30 terms upon review and approval. Contact us at [email protected] for more information.

    VMX Robotics Controller

    #70176
    $399.00
    ( 11 In stock)

    The Studica Robotics VMX (part #70176) is a powerful robotics controller with technology for enabling a rich development environment.  The VMX is a Linux-based computing platform with software tools and features enabling access to cutting-edge sensors.

    WorldSkills Lyon 2024 Mobile Robotics Collection

    #70205
    Request Quote

    The WorldSkills Lyon 2024 Mobile Robotics Collection, by Studica, is the authorized collection for the WorldSkills Mobile Robotics Competition in Lyon, France, 10-15 September 2024. This collection includes most of the items in the previous competition collection and has 28 new parts. The biggest change is the new 3D Depth Camera, the 360 Degree LiDAR which will bring the competition to the next level for Autonomous Mobile Robotics (AMR).