Main Categories
    Filters
    Preferences
    Search

    MXP-MD2 Motor Driver and Sensor Adapter for NI myRIO

    The MXP-MD2 is a next-generation high performance Motor Controller Driver and Sensor Adapter with many added features to make it ready to use in your robot project. The included VNH5019ATR-E Motor Controller ICs are very robust with high current output and several important protection features. Many other I/O options have been incorporated into this design to make it extremely easy to interface to several different sensors.

    MFR Part #: 71010
    $189.00
    Availability: 10 in stock

    Features:

    • Includes 2 VNH5019 Motor Controller ICs,
      • 2 Enable Inputs, 2 direction inputs, one PWM input per channel up to 20Khz
      • Up to 12A Continuous output per channel, 30A peak current short ms duration
      • Under-voltage, over-voltage, reverse-voltage protection
      • Thermal Shutdown protection
      • Current Limit protection
      • Current Sense Output Proportional to Motor Current (approx. 140 mV/A)
      • Loss of Ground and Loss of Vcc Protection
      • Protection against short to Ground and short to Vcc

    Specifications:

    • 3V-compatible inputs
    • Directly interfaces with myRIO MXP Port
    • 8-16V DC Battery Input Terminal, J7, (GND, MTRS+ PWR)
    • Jumper Selectable Current sense feedback from the VNH5019 Motor ICs, J12, J17
    • Reverse Power LED Indicator
    • FWD and REV Motor Direction LED Indicators
    • 3 Servo Headers, J9, J10, J11, (SIG, SVDC, GND)
    • 1 Parallax Ping Sensor Port, J13, (GND, VCC, DIO)
    • 1 Sharp IR Port, J21, (AI0, VCC, GND)
    • 1 LSB Port, J18, (VCC AI0, AI1, AI2, AI3, GND)
    • 1 NavX Port, J19, (VCC, SDA, SCL, GND)
    • 2 Encoder Ports, J22, J23, (VCC, ENCB, GND, ENCA)
    • 1 I2C Port, J20, (NC, SCL, SDA)
    • Built in 5V 3A voltage Regulator
    • 3.3V Power Rail Header, J3, from myRIO
    • 5V Power Rail Header, J4, from onboard regulator
    • GND Rail Header, J6
    • Separate Servo Power Input, J8 (SV+ PWR, GND)
    Write your own review
    • Product can be reviewed only after purchasing it
    • Only registered users can write reviews
    *
    *
    • Bad
    • Excellent

    Features:

    • Includes 2 VNH5019 Motor Controller ICs,
      • 2 Enable Inputs, 2 direction inputs, one PWM input per channel up to 20Khz
      • Up to 12A Continuous output per channel, 30A peak current short ms duration
      • Under-voltage, over-voltage, reverse-voltage protection
      • Thermal Shutdown protection
      • Current Limit protection
      • Current Sense Output Proportional to Motor Current (approx. 140 mV/A)
      • Loss of Ground and Loss of Vcc Protection
      • Protection against short to Ground and short to Vcc

    Specifications:

    • 3V-compatible inputs
    • Directly interfaces with myRIO MXP Port
    • 8-16V DC Battery Input Terminal, J7, (GND, MTRS+ PWR)
    • Jumper Selectable Current sense feedback from the VNH5019 Motor ICs, J12, J17
    • Reverse Power LED Indicator
    • FWD and REV Motor Direction LED Indicators
    • 3 Servo Headers, J9, J10, J11, (SIG, SVDC, GND)
    • 1 Parallax Ping Sensor Port, J13, (GND, VCC, DIO)
    • 1 Sharp IR Port, J21, (AI0, VCC, GND)
    • 1 LSB Port, J18, (VCC AI0, AI1, AI2, AI3, GND)
    • 1 NavX Port, J19, (VCC, SDA, SCL, GND)
    • 2 Encoder Ports, J22, J23, (VCC, ENCB, GND, ENCA)
    • 1 I2C Port, J20, (NC, SCL, SDA)
    • Built in 5V 3A voltage Regulator
    • 3.3V Power Rail Header, J3, from myRIO
    • 5V Power Rail Header, J4, from onboard regulator
    • GND Rail Header, J6
    • Separate Servo Power Input, J8 (SV+ PWR, GND)
    Customers who bought this item also bought

    100mm Slim Mecanum Wheel Set (Bearing Rollers, 2 left, 2 right)

    #76246
    $139.00
    ( 13 In stock)

    The Studica Robotics 100mm Slim Mecanum Wheel Set comes with 2 left and 2 right wheels with steel ball bearings, blue steel frame and black rollers.  The wheel comprised of 12 black rollers and is able to move in any direction. Rollers are set at 45° to the axis of rotation of the wheel.  Rollers are mounted with steel ball bearings, making the roll more fluent.

     

    DC Power Plug 2.1mm ID x 5.5mm OD w/1m 18AWG cable

    #70016
    $3.49
    (In stock)

    Ideal for the myRIO.

    • Inside Contact Diameter: 2.1mm
    • Outside Contact Diameter: 5.5mm
    • Termination Style: Solder Cup
    • Voltage Rating: 12 V
    • 6 Amp
    • 1 meter cord length
    • 18AWG or 20AWG wire guage
    • DC connector type

    USB Cable, Type A to Type C, Blue, 2M

    #70186-2M
    $5.99

    USB Cable, Type A to Type C, Blue, 2 Meters, male to male

    3D Depth Camera

    #71044
    $189.00
    ( 21 In stock)

    The 3D Depth Camera from Studica Robotics is an affordable replacement for the RealSense D435, it is designed to provide an accurate high-definition depth-sensing camera for mobile robotics and consumer electronic projects.

    38mm Omni Wheel

    #76259
    $7.99
    ( 13 In stock)

    The Studica Robotics 38mm Omni Wheel was designed as an odometry wheel that can fit inside most channel sizes. For ease of use, three cores were designed to fit the 6mm D-Shaft, 5mm Hex Shaft, and 7mm Hex Shaft. The wheel is open for easy use in any ecosystem with the provided different-sized cores.

    Clamping Shaft Hub - v2

    #76280
    $7.99

    The Studica Clamping Shaft Hub v2 is used with flex and drive wheels and is improved for the absolute strongest hold.

      Maverick DC Gear Motor 61:1 w/Encoder

      #75001
      $28.99
      ( 5 In stock)

      The Studica Robotics Maverick 12V DC Gear Motor 61:1 w/Encoder is an ideal motor for robotics, designed for strength to endure competitions, with 100rpm and 708 oz-in of torque.

       

      Shaft Coupling 6mm ID, 12mm OD (2 pack)

      #76303-2
      $3.99
      ( 9 In stock)

      The Studica Robotics Shaft Coupling has an ID of 6mm and an OD of 12mm.  It can be used with the 6mm D-Shaft Axle and a 6mm shaft DC motor. 

      Shaft Spacer 1mm, Nylon (24 pack)

      #76305-24
      $5.99
      (In stock)

      This Studica Robotics 1mm nylon spacer 24-pack is used to space gears, sprockets, wheels, and other parts along a 6mm shaft. Mix and match with various spacer lengths.