A 2-pack of #25 - 32 tooth sprockets for use with robotics design, made of 6061-T6 aluminum.
USB Cable, Type A to Type C, Blue, 2 Meters, male to male
Ideal for the myRIO.
The Studica Robotics 100mm Slim Mecanum Wheel Set comes with 2 left and 2 right wheels features a sleek slim design with steel ball bearings, blue steel frame and black rollers. The wheel comprised of 12 black rollers and is able to move in any direction. Rollers are set at 45° to the axis of rotation of the wheel. Rollers are mounted with steel ball bearings, making them roll more fluent.
Click to Apply for a FIRST Team Discount
The 3D Depth Camera from Studica Robotics is an affordable replacement for the RealSense D435, it is designed to provide an accurate high-definition depth-sensing camera for mobile robotics and consumer electronic projects.
The Studica Robotics 38mm Omni Wheel was designed as an odometry wheel that can fit inside most channel sizes. For ease of use, three cores were designed to fit the 6mm D-Shaft, 5mm Hex Shaft, and 7mm Hex Shaft. The wheel is open for easy use in any ecosystem with the provided different-sized cores.
The Studica Robotics Clamping 6mm D-Shaft Hub - v2 is used with flex and drive wheels and is improved for the absolute strongest hold.
The Maverick 12V DC Gear Motor 61:1 w/Encoder from Studica Robotics is an ideal high torque motor for robotics, designed for strength to endure competitions, with 100rpm and 708 oz-in of torque.
To connect to the REV Robotics Control Hub, the Maverick Encoder Cable (#70163) is required as an Add-on.
Note: This motor is legal for FIRST (FTC) competitions.
The Studica Robotics Servo Spline Gear is a 30-Tooth Gear with a 25-Tooth Spline. It is used with the Multi-Mode Smart Servo or Multi-Mode Smart Servo 200.
The Studica Robotics 12 Tooth 5mm Pitch GT2 D-Shaft Pulley is ideal for your robotics design builds.
M3 x 25mm Socket Head Cap Screw (pack of 100), Zinc Plated. Can be used with our M3 Stainless Steel Split Washers for an ideal fit.
The Studica Robotics #25 Chain and Sprocket Pack includes a #25 chain, a variety of sprockets, bronze bushings, shaft hubs, spacers, screws, collars and a chain breaker tool, ideal for your robotics designs.
A #25 - 48 tooth sprocket for use with robotics design, made of 6061-T6 aluminum.
A Studica Robotics #25 - 40 tooth sprocket for use with robotics design, made of 6061-T6 aluminum.
A Studica Robotics 2-pack of #25 - 24 tooth sprockets for use with robotics design, made of 6061-T6 aluminum.
