A Studica Robotics aluminum alloy shock absorber for use with your robotics design builds.
Specifications:
The Studica Robotics Slide Rail is made of 6061 lightweight aluminum, is 24mm wide, and is perfect for linear motion and building a multi-stage slide system. Closed length is 288m, with a 180mm stroke, creating an extended length of 468mm.
The Studica Robotics Slide Rail is made of light weight aluminum, is 24mm wide, and is perfect for building a multi-stage slide system. Ideal for linear motion the closed length is 384mm, with a 240mm stroke, creating a 624mm extended length.
The Studica Robotics 6mm D-Shaft Low Profile Clamping Hub is an ideal fit for our motors.
Used with the Intake Kit to create various intake system with various lengths.
The Studica Robotics Servo Arm Extended can be used with the Multi Mode Servo, Multi Mode Servo 200, or most servos with a 25 Tooth gear.
The Studica Robotics RC Servo Arm can be used with the Multi Mode Smart Servo, Multi Mode Smart Servo 200, or most servos with a 25 Tooth gear.
The Studica Robotics Servo Hub Pro can be used with the Multi Mode Servo, Multi Mode Servo 200, and most servos with a 25 Tooth gear.
The Studica Robotics 6mm D-shaft collar clamp (2-piece) has a 6mm D-hole and dimensions of 20mm x 8mm.
The Studica Robotics 250mm Linear Slide Set will provide precision and low friction sliding for all your linear motion and robot applications.
The Studica Robotics 6mm D-Shaft Servo Hub 25T is made of anodized 6061-T6 Aluminum and is used to connect a servo motor to a D-Shaft axle.
A shock absorber (2-pack) for use with Studica Robotics design builds, made of aluminum alloy, total lenght of 63mm.
The Studica Robotics All-Terrain Pack includes all-terrain tires, shock absorbers, D-shafts, flange bearings and shaft spacers, ideal for your robotics designs.
The Studica Robotics 110mm All-Terrain Rubber Wheel Tire includes a 6mm adapter. It has a foam core and therefore does not require air.
The Studica Robotics D-Shaft Collar is 6mm ID and 12mm OD. The inside diameter will fit any of the D-Shaft axles.
The 6mm x 96mm D-Shaft is made of stainless steel and is used throughout our building system as drive components. The D-Shaft profile is used with pulleys, gears and hubs when tightening the set screws and creating a non-slip connection.
The 6mm ID Round Flanged Bearing fits any of the channel and flat brackets with the common hole pattern having a center hole of 14mm. The inside diameter will fit any of the D-Shaft axles.
This Studica Robotics 1mm nylon spacer 24-pack is used to space gears, sprockets, wheels, and other parts along a 6mm D-shaft. Mix and match with various spacer lengths.