The Studica Robotics 30 Tooth D-Shaft Gear is ideal for use with robotics design builds.
Specifications:
A Studica Robotics 90 Tooth D-Shaft Gear for use with robotics design builds.
The Studica Robotics 160mm closed-loop 6mm GT2 timing belt (2 pack) has a 2mm pitch and a 6mm width.
The Studica Robotics Threaded Joiner Plate can be used to join two different structure components together, such as U-Channels and brackets.
The Studica Robotics Threaded Pattern Plate (6-pack) can be used to join two different structural components together.
The Studica Robotics Rubber Grommets (10 pack) are made for channels and plates and/or any structure with a 14mm hole. For use to protect wire or as a bumper.
The Studica Robotics U-Channel Bumper (4 pack) is connected to the end of a 48mm U-Channel and helps to eliminate sharp corners that can cause damage when the robot is bumping into other objects. It also creates an aesthetically clean finish to your robot.
The Studica Robotics nylon Rubber Foot (4 pack) is used with our structure for robotics design builds.
The M3 x 10mm low profile screw with Kep Nut is a 304 Stainless Steel M3 Din 7991 countersunk hex socket flat head screw with a matching Kep Nut. This package is made for the Slide Rail, 288mm Length, 180mm Stroke and the Slide Rail, 384mm Length, 240mm Stroke
· 450mm Length
· 3 position
· TJC8 MH-FC on one end
· TJC8 FH-MC on the other end
· Twisted cable
· Colors: White, Red, Black (red in middle)
· 24AWG Guage
A 128 tooth gear for robotics design, made from 6061-T6 aluminum, with a 6.35mm thickness and a 14mm hole diameter.
A Studica Robotics 13-tooth bevel gear (2 pack) for use in robotics design builds.
A Studica Robotics 26-tooth bevel gear for use in robotics design and competitions.
The Studica Robotics 30-tooth bevel gear, 1-1 set (2 pack) is ideal for robotics design builds.
The Studica Robotics 32-tooth gear (2-pack) is ideal for use with robotics design builds.
A Studica Robotics 64-tooth gear (2 pack), for use with robotics design builds.
The Studica Robotics Gear Pack includes 32, 64 and 128 tooth gears, shaft hubs and socket head cap screws, ideal for your robotics designs.
The Studica Robotics Pro Gear Pack includes 13, 26 and 30 tooth bevel gears, rack & pinion, shaft hubs and socket head cap screws, ideal for your robotics designs.
