The Studica Robotics 6mm Hex-Shaft Servo Hub 25T is made of anodized 6061-T6 Aluminum and is used to connect a servo motor to a Hex-Shaft axle.

The Intake Hub Kit Hex-Shaft from Studica Robotics is engineered for building reliable and effective intake systems, especially in competitive robotics environments like FTC (FIRST Tech Challenge) and WRO (World Robotics Olympiad). Crafted from high-strength 6061-T6 aluminum, this hub supports a 6-pin, 6-M6 tapped-hole design to securely mount silicone tubing, wheels, or rollers—even under high load. 

The hub can be used with the Silicone Rubber Tubing #76410 (sold separately).

The 6mm x 96mm Hex-Shaft is made of stainless steel and is used throughout our building system as drive components. The Hex-Shaft profile is used with pulleys, gears and hubs when tightening the set screws and creating a non-slip connection.

The 6mm x 140mm Hex-Shaft is made of stainless steel and is used throughout our building system as drive components. The Hex-Shaft profile is used with pulleys, gears and hubs when tightening the set screws and creating a non-slip connection.

The Studica Robotics Rack and Pinion Set for 6mm Hex Shaft includes 1 Rack, 1 Pinion, and 2 Glides. The rack hole pattern matches that of the channel, flat beams, square beams and flat brackets so it's easy to mount on the Studica Robotics structure.  

Made of aluminum, the Studica Robotics Clamping 7mm Hex-Shaft Hub is used with flex and drive wheels.

The Studica Robotics Light Weight 6mm Hex-Shaft Hub (2 pack) are used with 6mm Hex shafts. They have a 5mm set screw for tight clamping and seven M3 tapped mounting holes.

The Studica Robotics 6mm Hex-Shaft Hub (4 pack) is used to connect any Studica wheel and/or motor with a 6mm shaft.

The Studica Robotics 5mm Hex Shaft Hub allows users that have existing Omni Wheels (Part# 76260) or Mecanum Wheels (Part# 76243) to use REV Robotics 5mm Hex Shafts and Hex Motors.

The Studica Robotics 1:1 motor mounting plate kit can be used with the Studica Maverick or any FTC legal motor such as the Neverest Classic (6600 RPM) or the REV HD Hex motor (6000RPM). 

The Studica Robotics 1-1 Motor D-Shaft Kit can be used with the Studica Maverick or any FTC legal motor such as the Neverest Classic (6600 RPM) or the REV HD Hex motor (6000 RPM). The kit includes a faceplate which supports the Studica Robotics building platform. The shaft is press-fit onto the motor's shaft. It is recommended that the shaft be supported by a bearing (part # 76302 for the Studica building system).

The Studica Robotics 1-1 Motor Hex-Shaft Kit can be used with the Studica Maverick or any FTC legal motor such as the Neverest Classic (6600 RPM) or the REV HD Hex motor (6000 RPM). The kit includes a faceplate which supports the Studica Robotics building platform. The shaft is press-fit onto the motor's shaft.

The Studica Robotics enhanced wheel Hex-shaft hub kit is ideal for use with the Omni and Mecanum wheels for a strong axle hold.

The Studica Robotics 6mm D-shaft collar clamp (2-piece) has a 6mm D-hole and dimensions of 20mm x 8mm.

The Studica Robotics 6mm Hex-shaft collar clamp (2-piece) has a 6mm Hex-hole and dimensions of 20mm x 8mm.

The Studica Robotics 6mm Hex-Shaft Face Bearing Block can be mounted on any channel and bracket allowing for a 6mm ID through hole for 6mm shafts (axles). The block has a permanently installed Standard Sealed Bearing and has 8 x M3 tapped through holes for easy mounting.

The 6mm ID Round Flanged Bearing fits any of the channel and flat brackets with the common hole pattern having a center hole of 14mm. The inside diameter will fit any of the D-Shaft axles.

The Studica Robotics 6mm Hex-Shaft Flanged Bearing fits any of the channel and flat brackets with the common hole pattern having a center hole of 14mm. The inside diameter will fit any of the 6mm Hex-Shaft axles.

The Studica Robotics 24 Tooth 5mm Pitch GT2 D-Shaft Pulley is ideal for your robotics design builds.

The Studica Robotics 60 Tooth GT2-6mm Timing Belt Hex-Shaft Pulley can be used with any of the GT2 belts in your robotics builds.

The Studica Robotics 60 Tooth GT2-6mm Timing Belt D-Shaft Pulley can be used with any of the GT2 belts in your robotics builds.

The Studica Robotics 80 Tooth GT2-6mm Timing Belt Hex-Shaft Pulley can be used with any of the GT2 belts in your robotics builds.

The Studica Robotics 80 Tooth GT2-6mm Timing Belt D-Shaft Pulley can be used with any of the GT2 belts in your robotics builds.

The Studica Robotics 30 Tooth Hex-Shaft Gear is ideal for use with robotics design builds.