FTC
 |
 |
 |
FIRST Tech Challenge - FTC Robot Parts and Kits
Build Smarter with Studica Robotics, reliable, affordable solutions to help your team succeed. Explore our FTC Legal parts!
Build Better Robots®
Studica Robotics provides high-quality FIRST Tech Challenge robotic kits and FTC robot parts at competitive prices. Check out the FTC Starter Bot Resource Guide 2026-2027. View our FTC Starter Kit, Mecanum Chassis/Drive Base Kit, structure components, servos, slide rails, Omni wheels, Mecanum wheels, odometry solutions, and more below. Additional robot parts are available on the Studica Robotics page. Need Help? Contact the Studica Robotics team.
 |
 |
 |
Linear Servo RC Actuator 50S-190N
The Studica Robotics Linear Servo RC Actuator 50S-190N is a new linear servo motor which has a stroke of 50mm and a max force of 190N.
Note: This actuator is legal for FIRST (FTC) competitions.
Multi-Mode Smart Servo 200 - FAST
The Multi-Mode Smart Servo 200 rotates at 200RPM. This angular programmable Servo can fill a variety of roles on your robot or project. In standard mode, it operates on a +/- 150-degree range. Using the Studica Smart Robot Servo Programmer (sold separately) the Multi-mode Smart Servo can be configured to run in continuous, standard, and custom angular mode. In continuous rotation mode, the servo will have proportional speed control based on the PWM signal that you send with your servo controller.
Robotics Toolbox
Has two compartments on the lid for tools and electronics.
- Material: PP
- Size: 59*36*32cm (23" x 14" x 12.6")
- Capacity: 55L
Smart Robot Servo Programmer
The Studica Smart Robot Servo Programmer is used for programming the Studica Multi-Model Smart Servo Motor and for testing other standard Servos. Use it to program the Studica Servo motors to switch between continuous mode, standard mode, or any custom angular mode.
Specifications:
- Requires 6 Volt battery pack with TJC8 connector or use the Studica 6V DC Battery Holder.
- Programming setting modes
- Standard
- Continuous
- Angular
Battery Clip (2 pack)
The Studica Robotics battery clip (2 pack) is used to attach the Studica battery to the channel.
Motor Mount Plate
The Studica Robotics Motor Mount Plate is used with the Maverick 12V DC Gear Motor to attach to the inside any U-Channels.
Orbital Motor Mount
The Studica Robotics Orbital Motor Mount is used to fasten an orbital motor to your model's U-channel.
Motor Mount Clamp Kit
The Studica Robotics Motor Mount Clamp kit is used for fastening motors on the body of your robot and attaching the kit to a channel and/or other structures.
End Piece Plate (2 pack)
The Studica Robotics End Piece Plate (2 pack) is commonly fastened to the inside end of the U Channel. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required.
Servo Standard Front
The Servo Standard Front Mounting Bracket is one option to mount the Multi-Mode Smart Servo (75002) to the Studica building structure.
Servo Mount Flat Plate
The Studica Robotics Servo Mount Flat Plate is designed to mount the Multi-Mode Smart Servo (part #75002) to the Studica building structure.
Servo Mount Offset Plate
The Studica Robotics Servo Mount Offset Plate is used to mount the Multi-Mode Smart Servo (part #75002) to the Studica building structure.
Servo Hub Pro
The Studica Robotics Servo Hub Pro can be used with the Multi Mode Servo, Multi Mode Servo 200, and most servos with a 25 Tooth gear.