Close
Main Categories
    Filters
    Preferences
    Search

    Multi-Mode Smart Servo 200 - FAST

    The Multi-Mode Smart Servo 200 rotates at 200RPM. This angular programmable Servo can fill a variety of roles on your robot or project. In standard mode, it operates on a +/- 150-degree range. Using the Studica Smart Robot Servo Programmer (sold separately) the Multi-mode Smart Servo can be configured to run in continuous, standard, and custom angular mode. In continuous rotation mode, the servo will have proportional speed control based on the PWM signal that you send with your servo controller.  

    MFR Part #: 75007
    $24.99
    Availability: In stock

    Specifications:

    Type Steel Gear, Metal Bearings
    Weight 65g
    Gear Ratio 1/300
    Output Shaft Style 25 Tooth Spline (5.9mm)
    Voltage Range 4.8V ~ 7.4V
    No-Load Speed (6.0V) 0.046 sec/60° (215 RPM)
    No-Load Speed (7.4V) 0.038 sec/60° (260RPM)
    Stall Torque (6.0V) 5.0 kg.cm (69.5 oz-in)
    Stall Torque (7.4V) 8.0 kg.cm (111.2 oz-in)
    No-Load Current (6.0V) 130mA
    No-Load Current (7.4V) 150mA
    Stall Current (6.0V)  2.7A
    Stall Current (7.4V)  3.7A
    Max PWM Range (Default) 500 - 2500μsec
    Operating Travel (Default) 300°
    Pulse Amplitude 3-5V
    Rotating Direction CounterClockwise 
    Deadband Width 4μsec
    Motor Type Brushed DC
    Feedback Style 5KΩ Potentiometer
    Output Shaft Support Dual Ball Bearing
    Gear Material Steel
    Wire Length 70cm
    Wire Gauge 22 AWG
    Connector Type 3-Pos TJC8 Servo Connector [MH-FC]
    Write your own review
    • Product can be reviewed only after purchasing it
    • Only registered users can write reviews
    • Bad
    • Excellent

    Specifications:

    Type Steel Gear, Metal Bearings
    Weight 65g
    Gear Ratio 1/300
    Output Shaft Style 25 Tooth Spline (5.9mm)
    Voltage Range 4.8V ~ 7.4V
    No-Load Speed (6.0V) 0.046 sec/60° (215 RPM)
    No-Load Speed (7.4V) 0.038 sec/60° (260RPM)
    Stall Torque (6.0V) 5.0 kg.cm (69.5 oz-in)
    Stall Torque (7.4V) 8.0 kg.cm (111.2 oz-in)
    No-Load Current (6.0V) 130mA
    No-Load Current (7.4V) 150mA
    Stall Current (6.0V)  2.7A
    Stall Current (7.4V)  3.7A
    Max PWM Range (Default) 500 - 2500μsec
    Operating Travel (Default) 300°
    Pulse Amplitude 3-5V
    Rotating Direction CounterClockwise 
    Deadband Width 4μsec
    Motor Type Brushed DC
    Feedback Style 5KΩ Potentiometer
    Output Shaft Support Dual Ball Bearing
    Gear Material Steel
    Wire Length 70cm
    Wire Gauge 22 AWG
    Connector Type 3-Pos TJC8 Servo Connector [MH-FC]
    Customers who bought this item also bought

    Multi-Mode Smart Servo

    #75002
    $23.99
    (28 In stock)

    The Studica Multi-Mode Smart Servo features all-steel gears and large amounts of torque. This angular programmable Servo can fill a variety of roles on your robot or project. In standard mode, it operates on a +/- 150-degree range. Using the Studica Smart Robot Servo Programmer (sold separately) the Multi-mode Smart Servo can be configured to run in continuous, standard, and custom angular mode. In continuous rotation mode, the servo will have proportional speed control based on the PWM signal that you send with your servo controller.  

    I2C to I2C 3pin female to female cable, 22WAG

    #71012
    $10.00
    (10 In stock)

    Hex Key Metric 7 Piece Set (1.5, 2, 2.5, 3, 4, 5, 6)

    #70144-7
    $9.99
    (34 In stock)

    Specifications:

    • 7 color pcs
    • 1.5, 2, 2.5, 3, 4, 5, 6
    • Non-slip handle
    • ball-end and straight-end
    • S2 Hardness
    • Non-corrosive
    • Weight: 0.118kg

    JST-GH to 4 Pin Dupont Cable (4 pack)

    #70177
    $8.99
    (25 In stock)

    The JST-GH to 4 Pin Dupont Cable can be used for the VMX Controller.

    Anderson PowerPole 45 to JST VH Cable

    #70178
    $3.99
    (25 In stock)

    XT30 (MH-FC) to Tamiya (MH-FC) Cable

    #70179
    $3.99
    (25 In stock)

    USB Cable, Type A to Micro-B, Black, 1M

    #70187
    $3.99
    (25 In stock)

    Clamping Shaft Hub

    #76281
    $7.99
    (25 In stock)

    Made of aluminum, the Studica Clamping Shaft Hub is used with flex and drive wheels 

    Specifcation:

    • Material: 6061-T6 Aluminum
    • 6mm ID
    • Hole pattern for connecting to structure
    • Step File 

    Light Weight Shaft Hub

    #76282-2
    $7.99
    (50 In stock)

    The Studica Light Weight Shaft Hub is used with the 6mm D shafts. It has a 5mm set screw for tight clamping and seven M3 tapped mounting holes.

    Specifcation:

    • Material: 6061-T6 Aluminum
    • 6mm D Shaft ID
    • M3 tapped hole pattern for connecting to structure
    • Step File