A zinc-plated, M3 x 12mm Socket Head Cap Screw (pack of 100). Can be used with our M3 Stainless Steel Split Washers for an ideal fit.
· 450mm Length
· 3 position
· TJC8 MH-FC on one end
· TJC8 FH-MC on the other end
· Twisted cable
· Colors: White, Red, Black (red in middle)
· 24AWG Guage
This cable is designed for the encoder that is pre-attached to the NeveRest Series of motors and gearmotors. It has a connector on the opposite end to directly interface with the REV Expansion Hub or the REV Control Hub.
The Studica Robotics M3 T-Slot Nut 100 pack, is a Hammer Head Series 20, used with any M3 screw and fits the Studica T-Slot Extrusion.
A zinc-plated, M3 x 10mm Button Head Cap Screw (pack of 50). Can be used with our M3 Stainless Steel Split Washers for an ideal fit.
A zinc-plated, M3 x 10mm Socket Head Cap Screw (pack of 100). Can be used with our M3 Stainless Steel Split Washers for an ideal fit.
150mm Blue Zip Tie, 100 pack, can be used for wire management.
Specifications:
The Studica Robotics 100mm Flex Wheel (4"), with a 25mm axial width can be used for intake systems and conveyors with your robotics design builds.
A pack of 100 Studica Robotics M3 Nyloc Nuts for robotics design.
This GT2 (also called 2GT) timing belt has a 2mm Pitch, 6mm width, and open 1000mm in length. Use any of the GT2 pulleys from Studica and the clamp kit.
The Studica Robotics Expansion Pack includes U channels, flat brackets, L brackets, D-shafts, bushings, spacers, gears, screw caps, nuts and standoffs, ideal for your robotics designs.
The Studica Robotics #25 Chain and Sprocket Pack includes a #25 chain, a variety of sprockets, bronze bushings, shaft hubs, spacers, screws, collars and a chain breaker tool, ideal for your robotics designs.
The Studica Robotics Pro Gear Pack includes 13, 26 and 30 tooth bevel gears, rack & pinion, shaft hubs and socket head cap screws, ideal for your robotics designs.
The Studica Robotics Gear Pack includes 32, 64 and 128 tooth gears, shaft hubs and socket head cap screws, ideal for your robotics designs.
The Studica Robotics Fastener Pack includes socket head cap screws, kep nuts, nyloc nuts, a screwdriver and a wrench, ideal for your robotics designs.
A zinc-plated, M3 x 8mm Socket Head Cap Screw (pack of 100). Can be used with our M3 Stainless Steel Split Washers for an ideal fit.
A zinc-plated, M3 x 30mm Socket Head Cap Screw (pack of 50). Can be used with our M3 Stainless Steel Split Washers for an ideal fit.
A zinc-plated, M3 x 20mm Socket Head Cap Screw (pack of 50). Can be used with our M3 Stainless Steel Split Washers for an ideal fit.
A pack of 100 Studica Robotics M3 Kep Nuts for use with robotics design.
