A zinc-plated, M3 x 10mm Button Head Cap Screw (pack of 50). Can be used with our M3 Stainless Steel Split Washers for an ideal fit.
USB Cable, Type A to Type C, Blue, 2 Meters, male to male
Ideal for the myRIO.
The Studica Robotics 100mm Slim Mecanum Wheel Set comes with 2 left and 2 right wheels features a sleek slim design with steel ball bearings, blue steel frame and black rollers. The wheel comprised of 12 black rollers and is able to move in any direction. Rollers are set at 45° to the axis of rotation of the wheel. Rollers are mounted with steel ball bearings, making them roll more fluent.
Click to Apply for a FIRST Team Discount
The 3D Depth Camera from Studica Robotics is an affordable replacement for the RealSense D435, it is designed to provide an accurate high-definition depth-sensing camera for mobile robotics and consumer electronic projects.
The Maverick 12V DC Gear Motor 61:1 w/Encoder from Studica Robotics is an ideal high torque motor for robotics, designed for strength to endure competitions, with 100rpm and 708 oz-in of torque.
To connect to the REV Robotics Control Hub, the Maverick Encoder Cable (#70163) is required as an Add-on.
Note: This motor is legal for FIRST (FTC) competitions.
The Studica Robotics Clamping 6mm D-Shaft Hub - v2 is used with flex and drive wheels and is improved for the absolute strongest hold.
The Studica Robotics 38mm Omni Wheel was designed as an odometry wheel that can fit inside most channel sizes. For ease of use, three cores were designed to fit the 6mm D-Shaft, 5mm Hex Shaft, and 7mm Hex Shaft. The wheel is open for easy use in any ecosystem with the provided different-sized cores.
This Studica Robotics 1mm nylon spacer 24-pack is used to space gears, sprockets, wheels, and other parts along a 6mm D-shaft. Mix and match with various spacer lengths.
A pack of 100 Studica Robotics M3 Nyloc Nuts for robotics design.
The Studica Robotics End Piece Plate (2 pack) is commonly fastened to the inside end of the U Channel. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required.
The Studica Robotics Expansion Pack includes U channels, flat brackets, L brackets, D-shafts, bushings, spacers, gears, screw caps, nuts and standoffs, ideal for your robotics designs.
The Studica Robotics Motor Pack includes all you need to connect to your robotics model for use in classroom learning and competitions.
4 Maverick 12V DC Gear Motor w/Encoder (part #75001) are included.
The Studica Robotics Fastener Pack includes socket head cap screws, kep nuts, nyloc nuts, a screwdriver and a wrench, ideal for your robotics designs.
A zinc-plated, M3 x 8mm Socket Head Cap Screw (pack of 100). Can be used with our M3 Stainless Steel Split Washers for an ideal fit.
A zinc-plated, M3 x 30mm Socket Head Cap Screw (pack of 50). Can be used with our M3 Stainless Steel Split Washers for an ideal fit.
A zinc-plated, M3 x 20mm Socket Head Cap Screw (pack of 50). Can be used with our M3 Stainless Steel Split Washers for an ideal fit.
A zinc-plated, M3 x 12mm Socket Head Cap Screw (pack of 100). Can be used with our M3 Stainless Steel Split Washers for an ideal fit.
A zinc-plated, M3 x 10mm Socket Head Cap Screw (pack of 100). Can be used with our M3 Stainless Steel Split Washers for an ideal fit.
A pack of 100 Studica Robotics M3 Kep Nuts for use with robotics design.
