Expansion Hub Encoder Cable

The Studica Robotics 6mm D-Shaft Servo Hub 25T is made of anodized 6061-T6 Aluminum and is used to connect a servo motor to a D-Shaft axle.

The Multi-Mode Smart Servo 200 rotates at 200RPM. This angular programmable Servo can fill a variety of roles on your robot or project. In standard mode, it operates on a +/- 150-degree range. Using the Studica Smart Robot Servo Programmer (sold separately) the Multi-mode Smart Servo can be configured to run in continuous, standard, and custom angular mode. In continuous rotation mode, the servo will have proportional speed control based on the PWM signal that you send with your servo controller.  

The XL series belt is compatible with the 6mm, 10 tooth XL pulley.

Specifications:

• Material: Neoprene with Fiberglass cords
• Length: 1 meter
• Width: 9mm

A Studica Robotics 1mm, 3M screw spacer (25 pack), for use with robotics design builds.

The Studica Robotics Rubber Grommets (10 pack) are made for channels and plates and/or any structure with a 14mm hole. For use to protect wire or as a bumper. 

M3 x 25mm Socket Head Cap Screw (pack of 100), Zinc Plated.  Can be used with our M3 Stainless Steel Split Washers for an ideal fit.

M3 x 6mm Socket Head Cap Screw (pack of 50), Zinc Plated.  Can be used with our M3 Stainless Steel Split Washers for an ideal fit.

A zinc-plated, M3 x 10mm Socket Head Cap Screw (pack of 100).  Can be used with our M3 Stainless Steel Split Washers for an ideal fit.