Main Categories
    Filters
    Preferences
    Search

    M3 T-Slot Nut (100 pack)

    The Studica Robotics M3 T-Slot Nut 100 pack, is a Hammer Head Series 20, used with any M3 screw and fits the Studica T-Slot Extrusion.

    MFR Part #: 76130
    $3.99
    In stock

    Write your own review
    • Product can be reviewed only after purchasing it
    • Only registered users can write reviews
    *
    *
    • Bad
    • Excellent

    Customers who bought this item also bought

    DC Power Plug 2.1mm ID x 5.5mm OD w/1m 18AWG cable

    #70016
    $3.49
    (In stock)

    Ideal for the myRIO.

    • Inside Contact Diameter: 2.1mm
    • Outside Contact Diameter: 5.5mm
    • Termination Style: Solder Cup
    • Voltage Rating: 12 V
    • 6 Amp
    • 1 meter cord length
    • 18AWG or 20AWG wire guage
    • DC connector type

    100mm Slim Mecanum Wheel Set (Bearing Rollers, 2 left, 2 right)

    #76246
    $139.00
    (In stock)

    The Studica Robotics 100mm Slim Mecanum Wheel Set comes with 2 left and 2 right wheels with steel ball bearings, blue steel frame and black rollers.  The wheel comprised of 12 black rollers and is able to move in any direction. Rollers are set at 45° to the axis of rotation of the wheel.  Rollers are mounted with steel ball bearings, making the roll more fluent.

     

    USB Cable, Type A to Type C, Blue, 2M

    #70186-2M
    $5.99

    USB Cable, Type A to Type C, Blue, 2 Meters, male to male

    3D Depth Camera

    #71044
    $189.00
    (In stock)

    The 3D Depth Camera from Studica Robotics is an affordable replacement for the RealSense D435, it is designed to provide an accurate high-definition depth-sensing camera for mobile robotics and consumer electronic projects.

    Clamping 6mm D-Shaft Hub - v2

    #76280
    $7.99
    (In stock)

    The Studica Robotics Clamping 6mm D-Shaft Hub - v2 is used with flex and drive wheels and is improved for the absolute strongest hold.

    38mm Omni Wheel

    #76259
    $9.99
    (In stock)

    The Studica Robotics 38mm Omni Wheel was designed as an odometry wheel that can fit inside most channel sizes. For ease of use, three cores were designed to fit the 6mm D-Shaft, 5mm Hex Shaft, and 7mm Hex Shaft. The wheel is open for easy use in any ecosystem with the provided different-sized cores.

    Maverick DC Gear Motor 61:1 w/Encoder

    #75001
    $28.99
    (In stock)

    The Studica Robotics Maverick 12V DC Gear Motor 61:1 w/Encoder is an ideal motor for robotics, designed for strength to endure competitions, with 100rpm and 708 oz-in of torque.

     

    To connect to the REV Robotics Control Hub, the Maverick Encoder Cable (#70163) is required as an Add-on.

     

    Note: This motor is legal for FIRST (FTC) competitions.

    Face D-Shaft Bearing Block

    #76299
    $9.99
    (In stock)

    The Studica Robotics Face D-Shaft Bearing Block can be mounted on any channel and bracket allowing for a 6mm ID through hole for 6mm shafts (axles). The block has a permanently installed Standard Sealed Bearing and has 8 x M3 tapped through holes for easy mounting.

    M3 x 10mm Button Head Cap Screw (50 pack)

    #76203-50
    $8.99
    (In stock)

    A zinc-plated, M3 x 10mm Button Head Cap Screw (pack of 50).  Can be used with our M3 Stainless Steel Split Washers for an ideal fit.