Main Categories

    M3 x 30mm Socket Head Cap Screw (50 pack)

    A zinc-plated, M3 x 30mm Socket Head Cap Screw (pack of 50).

    MFR Part #: 76206-50
    Availability: In stock
    Write your own review
    • Product can be reviewed only after purchasing it
    • Only registered users can write reviews
    • Bad
    • Excellent
    Customers who bought this item also bought

    Servo Extension Cable


    ·      450mm Length

    ·      3 position

    ·      TJC8 MH-FC on one end

    ·      TJC8 FH-MC on the other end

    ·      Twisted cable

    ·      Colors: White, Red, Black (red in middle)

    ·      24AWG Guage

    GT2 Timing Belt, 2mm Pitch, 6mm width, 1000mm Open, (2 pack)

    (In stock)

    This GT2 (also called 2GT) timing belt has a 2mm Pitch, 6mm width, and open 1000mm in length. Use any of the GT2 pulleys from Studica and the clamp kit.



    • type: GT2 open-loop
    • pitch: 2 mm
    • width: 6 mm
    • material: neoprene rubber, fiberglass reinforced
    • belt shape: circular tooth profile

    M3 Nyloc Nut (pack of 100)

    (In stock)

    A pack of 100 Studica Robotics M3 Nyloc Nuts for robotics design.

    Zip Ties, Blue, 150mm (100 pack)

    (In stock)

    150mm Blue Zip Tie, 100 pack, can be used for wire management.



    • Length: 150mm
    • Material: Nylon
    • Quantity: 100pcs


    100mm Flex Wheel, 35A, 25mm wide, 1/2" Inner Hex, Green

    (In stock)

    The Studica Robotics 100mm Flex Wheel (4"), with a 25mm axial width can be used for intake systems and conveyors with your robotics design builds.

    336mm Low Profile U-Channel

    (In stock)

    The Studica Robotics 336mm Low Profile U-Channel is 3mm thick and has a 48mm x 14mm profile. 

    XT30 (MH-FC) to Tamiya (MH-FC) Cable

    (In stock)

    42mm Hinge with Bearings

    (In stock)

    Made from aluminum and anodized in blue, the Studica Robotics 42mm Hinge with Bearings connects to the Studica structure hole pattern such as the channel, plates, and beams. The holes are 3.2mm diameter to use with the M3 screws. 

    48mm Flat Beam

    (In stock)

    The Studica Robotics 48mm Flat Beam is 3mm thick and 8mm wide. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required.