M3 x 12mm Socket Head Cap Screw (100 pack)

·      450mm Length

·      3 position

·      TJC8 MH-FC on one end

·      TJC8 FH-MC on the other end

·      Twisted cable

·      Colors: White, Red, Black (red in middle)

·      24AWG Guage

The Studica Robotics M3 T-Slot Nut 100 pack, is a Hammer Head Series 20, used with any M3 screw and fits the Studica T-Slot Extrusion.

A zinc-plated, M3 x 10mm Button Head Cap Screw (pack of 50).  Can be used with our M3 Stainless Steel Split Washers for an ideal fit.

150mm Blue Zip Tie, 100 pack, can be used for wire management.

Specifications:

• Length: 150mm
• Material: Nylon
• Quantity: 100pcs

The Studica Robotics 100mm Flex Wheel (4"), with a 25mm axial width can be used for intake systems and conveyors with your robotics design builds.

A pack of 100 Studica Robotics M3 Nyloc Nuts for robotics design.

This GT2 (also called 2GT) timing belt has a 2mm Pitch, 6mm width, and open 1000mm in length. Use any of the GT2 pulleys from Studica and the clamp kit.

Specifications:

• type: GT2 open-loop
• pitch: 2 mm
• width: 6 mm
• material: neoprene rubber, fiberglass reinforced
• belt shape: circular tooth profile

Made from aluminum and anodized in blue, the Studica Robotics 42mm Hinge with Bearings connects to the Studica structure hole pattern such as the channel, plates, and beams. The holes are 3.2mm diameter to use with the M3 screws. 

The Studica Robotics Cobra Line Follower Array provides 4 X QRE1113 IR reflectance sensor mounted on a 9mm pitch.  Each sensor is comprised of two parts - an IR emitting LED and an IR sensitive phototransistor. When you apply power to the VCC and GND pins the IR LED inside the sensor will illuminate.