The 6mm x 140mm Hex-Shaft is made of stainless steel and is used throughout our building system as drive components. The Hex-Shaft profile is used with pulleys, gears and hubs when tightening the set screws and creating a non-slip connection.

The Studica Robotics 6mm Hex-Shaft Flanged Bearing fits any of the channel and flat brackets with the common hole pattern having a center hole of 14mm. The inside diameter will fit any of the 6mm Hex-Shaft axles.

The 6mm x 96mm Hex-Shaft is made of stainless steel and is used throughout our building system as drive components. The Hex-Shaft profile is used with pulleys, gears and hubs when tightening the set screws and creating a non-slip connection.

The Studica Robotics 6mm Hex-Shaft Rack and Pinion Set includes 1 Rack, 1 Pinion, and 2 Glides. The rack hole pattern matches that of the channel, flat beams, square beams and flat brackets so it's easy to mount on the Studica Robotics structure.  

The 6mm diameter Hex-Shaft is made of stainless steel and is used throughout our building system as drive components. The Hex-Shaft profile is used with pulleys, gears and hubs when tightening the set screws and creating a non-slip connection.

The Studica Robotics 6mm x 432mm Hex-Shaft is made of stainless steel and is used throughout our building system as drive components. The Hex-Shaft profile is used with pulleys, gears and hubs when tightening the set screws and creating a non-slip connection.

The Studica Robotics enhanced wheel Hex-shaft hub kit is ideal for use with the Omni and Mecanum wheels for a strong axle hold.

The Studica Robotics 80 Tooth GT2-6mm Timing Belt Hex-Shaft Pulley can be used with any of the GT2 belts in your robotics builds.

The 6mm diameter Hex-Shaft is made of stainless steel and is used throughout our building system as drive components. The Hex-Shaft profile is used with pulleys, gears and hubs when tightening the set screws and creating a non-slip connection.

The Studica Robotics 60mm OD round groove 6mm hex pulley is for use with your robotics design builds.

The Studica Robotics 60 Tooth GT2-6mm Timing Belt Hex-Shaft Pulley can be used with any of the GT2 belts in your robotics builds.

The Studica Robotics 40 Tooth GT2-6mm Timing Belt Hex-Shaft Pulley can be used with any of the GT2 belts in your robotics builds.

The Studica Robotics 30 Tooth Hex-Shaft Gear is ideal for use with robotics design builds.

The Studica Robotics 30 Tooth GT2-6mm Timing Belt Hex-Shaft Pulley can be used with any of the GT2 belts in your robotics builds.

The Studica Robotics 5mm Hex Shaft Hub allows users that have existing Omni Wheels (Part# 76260) or Mecanum Wheels (Part# 76243) to use REV Robotics 5mm Hex Shafts and Hex Motors.

The Studica Robotics Intake Hex-Shaft Hub Kit can be used to create intake systems and is ideal for the FIRST Technical Challenge (FTC) and World Robotics Olympiad (WRO). Can be used with the Silicone Rubber Tubing #76410 (sold separately).

Made of aluminum, the Studica Robotics Clamping 7mm Hex-Shaft Hub is used with flex and drive wheels.

The Studica Robotics Clamping 6mm Hex-Shaft Hub is used with flex and drive wheels and is improved for the absolute strongest hold.

The Studica Robotics Light Weight 6mm Hex-Shaft Hub (2 pack) are used with 6mm Hex shafts. They have a 5mm set screw for tight clamping and seven M3 tapped mounting holes.

The Studica Robotics 1-1 Motor Hex-Shaft Kit can be used with the Studica Maverick or any FTC legal motor such as the Neverest Classic (6600 RPM) or the REV HD Hex motor (6000 RPM). The kit includes a faceplate which supports the Studica Robotics building platform. The shaft is press-fit onto the motor's shaft.

The Studica Robotics 12 Tooth 5mm Pitch GT2 Hex-Shaft Pulley is ideal for your robotics design builds.

The Studica Robotics 20 Tooth GT2-6mm Timing Belt Hex-Shaft Pulley can be used with any of the GT2 belts. 

The Studica Robotics 50mm OD round groove 6mm hex pulley is for use with your robotics design builds.

This 1mm Spacer is used to space gears, sprockets, wheels, and other parts along a 6mm Hex-shaft. Mix and match various spacer lengths.

The Studica Robotics 6mm Hex-Shaft Servo Hub 25T is made of anodized 6061-T6 Aluminum and is used to connect a servo motor to a Hex-Shaft axle.

The Studica Robotics 40mm OD round groove 6mm hex pulley is for use with your robotics design builds.

The Studica Robotics 6mm Hex-Shaft Low Profile Clamping Hub is an ideal fit for our motors.

This Studica Robotics 1mm nylon spacer 24-pack is used to space gears, sprockets, wheels, and other parts along a 6mm Hex-shaft. Mix and match with various spacer lengths.

The Studica Robotics 30mm OD round groove 6mm hex pulley is for use with robotics design builds. 

The Studica Robotics Hex-Shaft Coupling has an ID of 6mm and an OD of 12mm.  It can be used with the 6mm Hex-Shaft Axle and a 6mm shaft DC motor. 

The Studica Robotics Hex-Shaft Collar is 6mm ID and 12mm OD. The inside diameter will fit any of the Hex-Shaft axles.

This 20mm Spacer is used to space gears, sprockets, wheels, and other parts along a 6mm Hex-shaft. Mix and match various spacer lengths.

The Studica Robotics 6mm Hex-shaft collar clamp cay be used with the 6mm D-Shape Shaft to secure wheels in their position.

The Studica Robotics 20mm OD round groove 6mm hex pulley is for use in robot design builds.

The Studica Robotics 10mm OD round groove 6mm Hex pulley is for use with your robot design builds.

The Studica Robotics 6mm Hex-shaft collar clamp (2-piece) has a 6mm Hex-hole and dimensions of 20mm x 8mm.

This 5mm Spacer is used to space gears, sprockets, wheels, and other parts along a 6mm Hex-shaft. Mix and match various spacer lengths.