Motion
Motion Components for Robotics
Explore robotics motion components from Studica Robotics.
100mm Flex Wheel, 60A, 25mm wide, 1/2" Inner Hex, Black
The Studica Robotics 100mm (4") black Flex Wheel with an axial width of 25mm and a durometer of 60A can be used for intake systems and conveyors.
30 Tooth GT2-6mm Timing Belt Pulley
The Studica Robotics 30-Tooth GT2-6mm Timing Belt Pulley can be used with any of the GT2 belts in your robotics builds.
GT2 Timing Belt, 2mm Pitch, 6mm width, 160mm Closed, (2 pack)
The Studica Robotics 160mm closed-loop 6mm GT2 timing belt (2 pack) has a 2mm pitch and a 6mm width.
Servo Hub Pro
The Studica Robotics Servo Hub Pro can be used with the Multi Mode Servo, Multi Mode Servo 200, and most servos with a 25 Tooth gear.
40 Tooth GT2-6mm Timing Belt Pulley
The Studica Robotics 40-Tooth GT2-6mm Timing Belt Pulley can be used with any of the GT2 belts in your robotics builds.
50mm Drive Wheel, 35A, 25mm wide, 1/2" Inner Hex, Green
The Studica Robotics 50mm (2") green Drive Wheel with a durometer of 35A can be used as a simple wheel providing good traction on carpet and tile flooring. The drive wheel can also be used for intake systems and with 1/2" hex shafts or 6mm Shaft Hubs to connect 6mm D-Shaft Axles.
64 Tooth 5mm Pitch GT2 Belt
The Studica Robotics 64-tooth 5mm pitch GT2 belt is ideal for your robotics design builds.
50mm Drive Wheel, 40A, 25mm wide, 1/2" Inner Hex, Orange
The Studica Robotics 50mm (2") orange Drive Wheel with a durometer of 40A can be used as a simple wheel providing good traction on carpet and tile flooring. The drive wheel can also be used for intake systems and with 1/2" hex shafts or 6mm Shaft Hubs to connect 6mm D-Shaft Axles.
60 Tooth GT2-6mm Timing Belt Pulley
The Studica Robotics 60-Tooth GT2-6mm Timing Belt Pulley can be used with any of the GT2 belts in your robotics builds.
6mm Servo Hub 25T
The Studica Robotics 6mm Servo Hub 25T is made of anodized 6061-T6 Aluminum and is used to connect a servo motor to a D-Shaft axle.
82 Tooth 5mm Pitch GT2 Belt
The Studica Robotics 82-tooth 5mm pitch GT2 belt is ideal for your robotics design builds.
50mm Drive Wheel, 50A, 25mm wide, 1/2" Inner Hex, Blue
The Studica Robotics 50mm (2") blue Drive Wheel with a durometer of 50A can be used as a simple wheel providing good traction on carpet and tile flooring. They can also be used for intake systems.
6V DC Battery Holder, for Smart Robot Servo Programmer
Use it to power the Studica Smart Robot Servo Programmer or any other device requiring 6V output and a TJC8 connector.
Specifications:
- 6V Output
- On/Off Power switch
- TJC8 connector
- Uses 4 x 1.5V AA Batteries (not included)
80 Tooth GT2-6mm Timing Belt Pulley
The Studica Robotics 60-Tooth GT2-6mm Timing Belt Pulley can be used with any of the GT2 belts in your robotics builds.
12 Tooth 5mm Pitch GT2 Pulley
The Studica Robotics 12-tooth 5mm Pitch GT2 Pulley is ideal for your robotics design builds.
50mm Drive Wheel, 60A, 25mm wide, 1/2" Inner Hex, Black
The 50mm (2") Studica Robotics black Drive Wheel with a durometer of 60A can be used as a simple wheel providing good traction on carpet and tile flooring. They can also be used for intake systems. For use with the 1/2" hex shaft or 6mm Shaft Hub to connect to 6mm D-Shaft Axles.