The Studica Robotics 6mm D-Shaft Servo Hub 25T is made of anodized 6061-T6 Aluminum and is used to connect a servo motor to a D-Shaft axle.

The Studica Robotics 40mm OD round groove 6mm hex pulley is for use with your robotics design builds.

The Studica Robotics 6mm Hex-Shaft Low Profile Clamping Hub is an ideal fit for our motors.

This Studica Robotics 1mm nylon spacer 24-pack is used to space gears, sprockets, wheels, and other parts along a 6mm Hex-shaft. Mix and match with various spacer lengths.

The Studica Robotics 6mm Hex-Shaft Servo Hub 25T is made of anodized 6061-T6 Aluminum and is used to connect a servo motor to a Hex-Shaft axle.

The Studica Robotics RC Servo Arm can be used with the Multi Mode Smart Servo, Multi Mode Smart Servo 200, or most servos with a 25 Tooth gear.

The Studica Robotics Servo Hub Pro can be used with the Multi Mode Servo, Multi Mode Servo 200, and most servos with a 25 Tooth gear.

The Studica Robotics 160mm closed-loop 6mm GT2 timing belt (2 pack) has a 2mm pitch and a 6mm width.

The Studica Robotics 82-tooth 5mm pitch GT2 belt is ideal for your robotics design builds.

The Studica Robotics Motor Mount Plate Leaf is used with the Maverick 12V DC Gear Motor to attach to the inside any U-Channels. 

This 20mm Spacer is used to space gears, sprockets, wheels, and other parts along a 6mm D-shaft. Mix and match various spacer lengths.

The XL series belt is compatible with the 6mm, 10 tooth XL pulley.

Specifications:

• Material: Neoprene with Fiberglass cords
• Length: 1 meter
• Width: 9mm

3/8” wide, 1/5 pitch XL series belti. Constructed of Neoprene with Fiberglass cords for superior strength and wear resistance. Compatible XL series pinion pulley.

The Studica Robotics 6mm D-shaft collar clamp cay be used with the 6mm D-Shape Shaft to secure wheels in their position.

This GT2 (also called 2GT) timing belt has a 2mm Pitch and 6mm width.

Specifications:

• type: GT2 closed-loop 140mm 
• pitch: 2 mm
• width: 6 mm
• material: neoprene rubber, fiberglass reinforced
• belt shape: circular tooth profile

The Studica Robotics 30mm OD round groove D-shaft pulley is for use with robotics design builds. 

Use it to power the Studica Smart Robot Servo Programmer or any other device requiring 6V output and a TJC8 connector. 

Specifications:

• 6V Output
• On/Off Power switch
• TJC8 connector
• Uses 4 x 1.5V AA Batteries (not included)

The Studica Robotics 30mm OD round groove 6mm hex pulley is for use with robotics design builds. 

The Studica Robotics Hex-Shaft Coupling has an ID of 6mm and an OD of 12mm.  It can be used with the 6mm Hex-Shaft Axle and a 6mm shaft DC motor. 

The Studica Robotics Hex-Shaft Collar is 6mm ID and 12mm OD. The inside diameter will fit any of the Hex-Shaft axles.

This 20mm Spacer is used to space gears, sprockets, wheels, and other parts along a 6mm Hex-shaft. Mix and match various spacer lengths.

The Studica Robotics 6mm Hex-shaft collar clamp cay be used with the 6mm D-Shape Shaft to secure wheels in their position.

The Servo Standard Front Mounting Bracket is one option to mount the Multi-Mode Smart Servo (75002) to the Studica building structure.

The Studica Robotics 64-tooth 5mm pitch GT2 belt is ideal for your robotics design builds.

The Studica Robotics 20mm OD round groove D-shaft pulley is for use in robot design builds.

The Studica Robotics 20mm OD round groove 6mm hex pulley is for use in robot design builds.

The Servo Horn 25T is made of anodized 6061-T6 Aluminum and is used with the Multi-Mode Smart Servo (75002) and the Studica building structure.

The Studica Robotics D-Shaft Coupling has an ID of 6mm and an OD of 12mm.  It can be used with the 6mm D-Shaft Axle and a 6mm shaft DC motor. 

This 1mm Spacer is used to space gears, sprockets, wheels, and other parts along a 6mm D-shaft. Mix and match various spacer lengths.

This GT2 (also called 2GT) timing belt has a 2mm Pitch and 6mm width.

Specifications:

• type: GT2 closed-loop 108mm 
• pitch: 2 mm
• width: 6 mm
• material: neoprene rubber, fiberglass reinforced
• belt shape: circular tooth profile

The Studica Robotics 6mm D-shaft collar clamp (2-piece) has a 6mm D-hole and dimensions of 20mm x 8mm.

Used with the Intake Kit to create various intake system with various lengths.