Belts
Belts
Our belts are used in robotics design for transmitting motion and power between two or more rotating shafts. They can be utilized for adjusting speed ratios between input and output shafts, for torque amplification, directional control, noise reduction and shock absorption in your design builds.
3/8 inch x 1/5 Pitch XL Timing Belt (3ft) x open-end
3/8” wide, 1/5 pitch XL series belti. Constructed of Neoprene with Fiberglass cords for superior strength and wear resistance. Compatible XL series pinion pulley.
10 Tooth Pulley & Timing Belt Set
The Studica Robotics 10-tooth Pulley includes two 5mm Bores, two 10-Tooth Aluminum Pulleys and one 1M XL Timing belt.
XL Timing Belt
The XL series belt is compatible with the 6mm, 10 tooth XL pulley.
Specifications:
- Material: Neoprene with Fiberglass cords
- Length: 1 meter
- Width: 9mm
Urethane 5mm Round Belt, 3m length
The Studica Robotics Urethane 5mm Round Groove Belt is 3m long and has a 10% stretch. It is also referred to as a U Groove belt.
GT2 Timing Belt, 2mm Pitch, 6mm width, 108mm Closed, (2 pack)
This GT2 (also called 2GT) timing belt has a 2mm Pitch and 6mm width.
Specifications:
- type: GT2 closed-loop 108mm
- pitch: 2 mm
- width: 6 mm
- material: neoprene rubber, fiberglass reinforced
- belt shape: circular tooth profile
GT2 Timing Belt, 2mm Pitch, 6mm width, 140mm Closed, (2 pack)
This GT2 (also called 2GT) timing belt has a 2mm Pitch and 6mm width.
Specifications:
- type: GT2 closed-loop 140mm
- pitch: 2 mm
- width: 6 mm
- material: neoprene rubber, fiberglass reinforced
- belt shape: circular tooth profile
GT2 Timing Belt, 2mm Pitch, 6mm width, 190mm Closed, (2 pack)
This GT2 (also called 2GT) timing belt has a 2mm Pitch and 6mm width.
Specifications:
- type: GT2 closed-loop 190mm
- pitch: 2 mm
- width: 6 mm
- material: neoprene rubber, fiberglass reinforced
- belt shape: circular tooth profile
GT2 Timing Belt, 2mm Pitch, 6mm width, 240mm Closed, (2 pack)
This GT2 (also called 2GT) timing belt has a 2mm Pitch and 6mm width.
Specifications:
- type: GT2 closed-loop 240mm
- pitch: 2 mm
- width: 6 mm
- material: neoprene rubber, fiberglass reinforced
- belt shape: circular tooth profile
GT2 Timing Belt, 2mm Pitch, 6mm width, 1000mm Open, (2 pack)
This GT2 (also called 2GT) timing belt has a 2mm Pitch, 6mm width, and open 1000mm in length. Use any of the GT2 pulleys from Studica and the clamp kit.
Specifications:
- type: GT2 open-loop
- pitch: 2 mm
- width: 6 mm
- material: neoprene rubber, fiberglass reinforced
- belt shape: circular tooth profile
GT2 Timing Belt, 2mm Pitch, 6mm width, 160mm Closed, (2 pack)
The Studica Robotics 160mm closed-loop 6mm GT2 timing belt (2 pack) has a 2mm pitch and a 6mm width.
64 Tooth 5mm Pitch GT2 Belt
The Studica Robotics 64-tooth 5mm pitch GT2 belt is ideal for your robotics design builds.
82 Tooth 5mm Pitch GT2 Belt
The Studica Robotics 82-tooth 5mm pitch GT2 belt is ideal for your robotics design builds.
GT2 Timing Belt, 2mm Pitch, 6mm width, 330mm Closed, (2 pack)
This GT2 (also called 2GT) timing belt has a 2mm Pitch and 6mm width.
Specifications:
- type: GT2 closed-loop 330mm
- pitch: 2 mm
- width: 6 mm
- material: neoprene rubber, fiberglass reinforced
- belt shape: circular tooth profile
GT2 Timing Belt, 2mm Pitch, 6mm width, 630mm Closed, (2 pack)
This GT2 (also called 2GT) timing belt has a 2mm Pitch and 6mm width.
Specifications:
- type: GT2 closed-loop 630mm
- pitch: 2 mm
- width: 6 mm
- material: neoprene rubber, fiberglass reinforced
- belt shape: circular tooth profile
GT2 Timing Belt, 2mm Pitch, 6mm width, 810mm Closed, (2 pack)
This GT2 (also called 2GT) timing belt has a 2mm Pitch and 6mm width.
Specifications:
- type: GT2 closed-loop 810mm
- pitch: 2 mm
- width: 6 mm
- material: neoprene rubber, fiberglass reinforced
- belt shape: circular tooth profile
Silicone Rubber Tubing
Used with the Intake Kit to create various intake system with various lengths.