This GT2 (also called 2GT) timing belt has a 2mm Pitch and 6mm width.

This GT2 (also called 2GT) timing belt has a 2mm Pitch and 6mm width.

Specifications:

• type: GT2 closed-loop 630mm 
• pitch: 2 mm
• width: 6 mm
• material: neoprene rubber, fiberglass reinforced
• belt shape: circular tooth profile

This GT2 (also called 2GT) timing belt has a 2mm Pitch and 6mm width.

Specifications:

• type: GT2 closed-loop 810mm 
• pitch: 2 mm
• width: 6 mm
• material: neoprene rubber, fiberglass reinforced
• belt shape: circular tooth profile

This GT2 (also called 2GT) timing belt has a 2mm Pitch, 6mm width, and open 1000mm in length. Use any of the GT2 pulleys from Studica and the clamp kit.

Specifications:

• type: GT2 open-loop
• pitch: 2 mm
• width: 6 mm
• material: neoprene rubber, fiberglass reinforced
• belt shape: circular tooth profile

The Multi-Mode Smart Servo 200 rotates at 200RPM. This angular programmable Servo can fill a variety of roles on your robot or project. In standard mode, it operates on a +/- 150-degree range. Using the Studica Smart Robot Servo Programmer (sold separately) the Multi-mode Smart Servo can be configured to run in continuous, standard, and custom angular mode. In continuous rotation mode, the servo will have proportional speed control based on the PWM signal that you send with your servo controller.  

The Studica Robotics Small Thrust Ball Bearing is used for vertical and axial loads to withstand heavy loads. These ball bearings have track grooves on the upper and lower track boards to reduce friction. Use these with structure for any hole where an axial load will be applied.

The Studica Robotics Slide Rail is made of 6061 lightweight aluminum, is 24mm wide, and is perfect for linear motion and building a multi-stage slide system. Closed length is 288m, with a 180mm stroke, creating an extended length of 468mm. 

The Studica Robotics Slide Rail is made of light weight aluminum, is 24mm wide, and is perfect for building a multi-stage slide system. Ideal for linear motion the closed length is 384mm, with a 240mm stroke, creating a 624mm extended length. 

The Studica Robotics Servo Arm Extended can be used with the Multi Mode Servo, Multi Mode Servo 200, or most servos with a 25 Tooth gear.

The Studica Robotics RC Servo Arm can be used with the Multi Mode Smart Servo, Multi Mode Smart Servo 200, or most servos with a 25 Tooth gear.

The Studica Robotics Servo Hub Pro can be used with the Multi Mode Servo, Multi Mode Servo 200, and most servos with a 25 Tooth gear.

The Studica Robotics 30 Tooth D-Shaft Gear is ideal for use with robotics design builds.

A Studica Robotics 90 Tooth D-Shaft Gear for use with robotics design builds.

The Studica Robotics 160mm closed-loop 6mm GT2 timing belt (2 pack) has a 2mm pitch and a 6mm width.

The Studica Robotics 38mm Omni Wheel was designed as an odometry wheel that can fit inside most channel sizes. For ease of use, three cores were designed to fit the 6mm D-Shaft, 5mm Hex Shaft, and 7mm Hex Shaft. The wheel is open for easy use in any ecosystem with the provided different-sized cores.

The Studica Robotics 100mm Slim Mecanum Wheel Set comes with 2 left and 2 right wheels features a sleek slim design with steel ball bearings, blue steel frame and black rollers.  The wheel comprised of 12 black rollers and is able to move in any direction. Rollers are set at 45° to the axis of rotation of the wheel.  Rollers are mounted with steel ball bearings, making them roll more fluent.

Click to Apply for a FIRST Team Discount

The Studica Robotics Servo Spline Gear is a 30-Tooth Gear with a 25-Tooth Spline. It is used with the Multi-Mode Smart Servo or Multi-Mode Smart Servo 200.

The Studica Robotics 64-tooth 5mm pitch GT2 belt is ideal for your robotics design builds.

The Studica Robotics 6mm D-shaft collar clamp (2-piece) has a 6mm D-hole and dimensions of 20mm x 8mm.

The Studica Robotics 82-tooth 5mm pitch GT2 belt is ideal for your robotics design builds.

The Studica Robotics 6mm D-Shaft Face Bearing Block can be mounted on any channel and bracket allowing for a 6mm ID through hole for 6mm shafts (axles). The block has a permanently installed Standard Sealed Bearing and has 8 x M3 tapped through holes for easy mounting.

The Intake Hub Kit D-Shaft from Studica Robotics is engineered for building reliable and effective intake systems, especially in competitive robotics environments like FTC (FIRST Tech Challenge) and WRO (World Robotics Olympiad). Crafted from high-strength 6061-T6 aluminum, this hub supports a 6-pin, 6-M6 tapped-hole design to securely mount silicone tubing, wheels, or rollers—even under high load. 

The hub can be used with the Silicone Rubber Tubing #76410 (sold separately).

Used with the Intake Kit to create various intake system with various lengths.

The Studica Robotics Orbital Motor Mount is used to fasten an orbital motor to your model's U-channel.

The Studica Robotics 12 Tooth 5mm Pitch GT2 D-Shaft Pulley is ideal for your robotics design builds.

The Studica Robotics 24 Tooth 5mm Pitch GT2 D-Shaft Pulley is ideal for your robotics design builds.

The Studica Robotics 125mm All-Terrain Robotics Wheel Set includes two left and two right rubber wheels. They have a foam core and therefore do not require air.

The Studica Robotics FTC Power Block is a game-changer in facilitating seamless power connections for various devices throughout your FTC robot.

The Intake Hub Kit Hex-Shaft from Studica Robotics is engineered for building reliable and effective intake systems, especially in competitive robotics environments like FTC (FIRST Tech Challenge) and WRO (World Robotics Olympiad). Crafted from high-strength 6061-T6 aluminum, this hub supports a 6-pin, 6-M6 tapped-hole design to securely mount silicone tubing, wheels, or rollers—even under high load. 

The hub can be used with the Silicone Rubber Tubing #76410 (sold separately).

Studica Robotics 6mm Hex Shaft insert for Cypher Max

The Studica Robotics 6mm Hex-Shaft Servo Hub 25T is made of anodized 6061-T6 Aluminum and is used to connect a servo motor to a Hex-Shaft axle.

The 6mm diameter Hex-Shaft is made of stainless steel and is used throughout our building system as drive components. The Hex-Shaft profile is used with pulleys, gears and hubs when tightening the set screws and creating a non-slip connection.